[Thu May  9 00:22:49 2013] Detection parameters:
  Position = (106.2, 867.1) = 13 13 27.19 47 20 25.8
  Extent = 0.7" x 0.5", rotation angle = 56 degrees
  Source counts = 18.3 +/- 4.4
  Background counts = 0.7
  Rate = 0.0009 +/- 0.0002

[Thu May  9 00:22:49 2013] Off-axis axis estimate = 3.52'
[Thu May  9 00:45:34 2013] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Thu May  9 00:45:34 2013] Initial guess for spatial extent in simple fitting = 0.70"
[Thu May  9 00:45:34 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.090
[Thu May  9 00:45:34 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 0.70"
[Thu May  9 00:53:54 2013] fullrun_ccd6_acisf14420_pi14-548_cl_pass0_src3.ximg exists
[Thu May  9 00:53:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14420_pi14-548_cl_pass0_src3.csv
[Thu May  9 00:53:54 2013] fullrun_ccd6_acisf14420_pi14-548_cl_pass0_src3_1.ximg exists
[Thu May  9 00:53:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14420_pi14-548_cl_pass0_src3.csv
[Thu May  9 00:53:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14420_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14420_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 00:53:54 2013] fullrun_ccd6_acisf14420_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu May  9 00:53:54 2013] fullrun_ccd6_acisf14420_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May  9 00:53:54 2013] Fit fullrun_ccd6_acisf14420_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May  9 01:07:43 2013] Spatial fit model total counts = 17.286600, observed total counts = 21.000000
[Thu May  9 01:07:43 2013] Offset between fit and detection position for source 7 = 0.506212 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.506212 pixels
  Position = (106.6, 867.4) = 13 13 27.19 47 20 25.6
  Extent = 1.0 (0.8-1.4)" x 0.6 (0.4-0.8)", rotation angle = 124 (100-149) degrees
  Source counts = 18.6 +/- 4.3
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Thu May  9 01:07:43 2013] Vigneting correction estimate = 1.000000
[Thu May  9 01:07:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 01:07:43 2013] Assessing source extent using major axis lower bound
[Thu May  9 01:07:43 2013] Source does appear to be extended
[Thu May  9 01:07:43 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Thu May  9 01:26:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 01:26:29 2013] Initial guess for spatial extent in simple fitting = 0.80"
[Thu May  9 01:26:29 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.105
[Thu May  9 01:26:29 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.80"
[Thu May  9 01:34:03 2013] fullrun_ccd6_acisf14420_pi14-548_cl_pass1_src3.ximg exists
[Thu May  9 01:34:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14420_pi14-548_cl_pass1_src3.csv
[Thu May  9 01:34:03 2013] fullrun_ccd6_acisf14420_pi14-548_cl_pass1_src3_1.ximg exists
[Thu May  9 01:34:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14420_pi14-548_cl_pass1_src3.csv
[Thu May  9 01:34:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14420_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14420_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 01:34:03 2013] fullrun_ccd6_acisf14420_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu May  9 01:34:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14420_pi14-548_cl_pass1_tfrozen_src3.csv
[Thu May  9 01:34:03 2013] fullrun_ccd6_acisf14420_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May  9 01:34:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14420_pi14-548_cl_pass1_tfrozen_src3.csv
[Thu May  9 01:34:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14420_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14420_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 01:46:52 2013] Spatial fit model total counts = 18.149700, observed total counts = 21.000000
[Thu May  9 01:46:52 2013] Offset between fit and detection position for source 7 = 0.146245 pixels
[Thu May  9 01:46:52 2013] 19.028164 total counts/ 0.104364 bgd. counts: snr = 58.577791
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.146245 pixels
  Position = (106.5, 867.4) = 13 13 27.20 47 20 25.7
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 18.9 +/- 4.4
  Background counts = 0.1
  Rate = 0.0009 +/- 0.0002
[Thu May  9 01:46:52 2013] Vigneting correction estimate = 1.000000
[Thu May  9 01:46:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 01:46:52 2013] Assessing source extent using major axis lower bound
[Thu May  9 01:46:52 2013] Source does appear to be extended
[Thu May  9 01:46:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 01:50:31 2013] Writing source region out to fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7_src.reg
[Thu May  9 01:50:31 2013] Extracting stamp from image fullrun_ccd6_acisf14420_pi14-548_cl_sm2.00.img.gz, (68, 829) - (145, 906)
[Thu May  9 01:50:31 2013] Writing fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7.gif
[Thu May  9 01:51:53 2013] Size of ../../acisf14420/products/events/fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7_src.evt.gz[events] = 19 counts
[Thu May  9 01:51:53 2013] Mean chipx,y = (958.63, 837.00)
[Thu May  9 01:51:53 2013] Mean tdetx,y = (3833.63, 2539.00)
[Thu May  9 01:51:53 2013] chipx,y range = (944.00-978.00, 814.00-851.00)
[Thu May  9 01:51:53 2013] Size of ../../acisf14420/products/events/fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 21 counts
[Thu May  9 01:51:54 2013] Not generating rmf since there are only 18 counts
[Thu May  9 01:51:54 2013] arf not found, will run specextract
[Thu May  9 01:52:26 2013] ../../acisf14420/products/spectra/fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7.warf not found
[Thu May  9 01:52:26 2013] ../../acisf14420/products/spectra/fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7.wrmf not found
[Thu May  9 01:52:26 2013] Removal of ../../acisf14420/products/spectra/fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7.soff failed
[Thu May  9 01:54:27 2013] Spectrum 7 has only 19 counts, deleting rmf
[Thu May  9 01:54:27 2013] 201.536
[Thu May  9 02:00:33 2013] Updating aperture counts using extracted products
[Thu May  9 02:00:33 2013] Total counts from fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7_src.pi.gz = 19.00
[Thu May  9 02:00:33 2013] Total counts from fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7_bgd.pi.gz = 21.00
[Thu May  9 02:00:33 2013] Got source and background scale factors 0.000002, 0.000026
[Thu May  9 02:00:33 2013] User source parameters:
  Position = (106.5, 867.4) = 13 13 27.20 47 20 25.7
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source aperture counts = 17.2 +/- 5.4
  Background aperture counts = 1.8
  Rate = 0.0009 +/- 0.0003

[Thu May  9 02:00:34 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 02:00:34 2013] Using photon index=1.80, rate=0.00094, arf fullrun_ccd6_acisf14420_pi14-548_pass1_cl_src7.arf
[Thu May  9 02:00:34 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  9 02:00:34 2013] Updating source flux to 1.1e-14
[Thu May  9 02:00:41 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting