[Wed May 22 09:31:51 2013] Detection parameters:
  Position = (94.7, 733.3) = 13 47 16.24 -11 31 48.4
  Extent = 1.5" x 0.9", rotation angle = 149 degrees
  Source counts = 17.3 +/- 5.3
  Background counts = 10.7
  Rate = 0.0003 +/- 8e-05

[Wed May 22 09:31:51 2013] Off-axis axis estimate = 11.44'
[Wed May 22 11:20:16 2013] Using EEF radius (= 5.83 ")to estimate initial spatial extent for simple fitting
[Wed May 22 11:20:16 2013] Initial guess for spatial extent in simple fitting = 5.83"
[Wed May 22 11:20:16 2013] source mask rpix=11.9, npix_max = 610, mask sum = 529, frac = 0.866
[Wed May 22 11:20:16 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 5.83"
[Wed May 22 12:33:52 2013] fullrun_ccd6_acisf14407_pi14-548_cl_pass0_src6.ximg exists
[Wed May 22 12:33:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14407_pi14-548_cl_pass0_src6.csv
[Wed May 22 12:33:52 2013] fullrun_ccd6_acisf14407_pi14-548_cl_pass0_src6_1.ximg exists
[Wed May 22 12:33:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14407_pi14-548_cl_pass0_src6.csv
[Wed May 22 12:33:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14407_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14407_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 12:33:52 2013] fullrun_ccd6_acisf14407_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed May 22 12:33:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14407_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed May 22 12:33:52 2013] fullrun_ccd6_acisf14407_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May 22 12:33:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14407_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed May 22 12:33:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14407_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14407_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 12:34:03 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 66.835618 pixels away
[Wed May 22 12:34:03 2013] Vigneting correction estimate = 1.000000
[Wed May 22 12:34:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 12:34:03 2013] Assessing source extent using major
[Wed May 22 12:34:03 2013] Source does appear to be extended
[Wed May 22 12:34:03 2013] Computing asymmetry using major and minor axis, asym = 1.71
[Wed May 22 12:34:03 2013] Source is asymmetric
[Wed May 22 12:34:03 2013] Deleting source due to low Poisson probability 0.9