[Wed Jun  5 07:06:00 2013] Detection parameters:
  Position = (804.0, 381.4) = 19 24 19.78 50 10 7.5
  Extent = 0.6" x 0.5", rotation angle = 71 degrees
  Source counts = 12.7 +/- 3.9
  Background counts = 2.3
  Rate = 0.0002 +/- 7e-05

[Wed Jun  5 07:06:01 2013] Off-axis axis estimate = 4.92'
[Wed Jun  5 09:24:39 2013] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 09:24:39 2013] Initial guess for spatial extent in simple fitting = 1.15"
[Wed Jun  5 09:24:39 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.936
[Wed Jun  5 09:24:39 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 1.15"
[Wed Jun  5 10:23:39 2013] fullrun_ccd7_acisf14405_pi14-548_cl_pass0_src37.ximg exists
[Wed Jun  5 10:23:39 2013] fullrun_ccd7_acisf14405_pi14-548_cl_pass0_src37_1.ximg exists
[Wed Jun  5 10:23:39 2013] Fit fullrun_ccd7_acisf14405_pi14-548_cl_pass0_src37 appears to have run properly
[Wed Jun  5 10:23:40 2013] fullrun_ccd7_acisf14405_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Wed Jun  5 10:23:40 2013] fullrun_ccd7_acisf14405_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Jun  5 10:23:40 2013] Fit fullrun_ccd7_acisf14405_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Wed Jun  5 10:23:53 2013] Spatial fit model total counts = 20.836300, observed total counts = 21.000000
[Wed Jun  5 10:23:53 2013] Offset between fit and detection position for source 2 = 0.761333 pixels
[Wed Jun  5 10:23:53 2013] 20.131970 total counts/ 6.212770 bgd. counts: snr = 5.584337
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.761333 pixels
  Position = (804.5, 382.0) = 19 24 19.77 50 10 7.6
  Extent = 0.7 (0.6-1.2)", rotation angle = 0
  Source counts = 13.9 +/- 4.5
  Background counts = 6.2
  Rate = 0.0003 +/- 8e-05
[Wed Jun  5 10:23:53 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 10:23:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 10:23:53 2013] Assessing source extent using major axis lower bound
[Wed Jun  5 10:23:53 2013] Source does appear to be extended
[Wed Jun  5 10:23:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 12:08:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun  5 12:08:20 2013] Initial guess for spatial extent in simple fitting = 0.74"
[Wed Jun  5 12:08:20 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.998
[Wed Jun  5 12:08:20 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 0.74"
[Wed Jun  5 12:59:28 2013] fullrun_ccd7_acisf14405_pi14-548_cl_pass1_src34.ximg exists
[Wed Jun  5 12:59:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14405_pi14-548_cl_pass1_src34.csv
[Wed Jun  5 12:59:28 2013] fullrun_ccd7_acisf14405_pi14-548_cl_pass1_src34_1.ximg exists
[Wed Jun  5 12:59:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14405_pi14-548_cl_pass1_src34.csv
[Wed Jun  5 12:59:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14405_pi14-548_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14405_pi14-548_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 12:59:28 2013] fullrun_ccd7_acisf14405_pi14-548_cl_pass1_tfrozen_src34.ximg exists
[Wed Jun  5 12:59:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14405_pi14-548_cl_pass1_tfrozen_src34.csv
[Wed Jun  5 12:59:28 2013] fullrun_ccd7_acisf14405_pi14-548_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Jun  5 12:59:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14405_pi14-548_cl_pass1_tfrozen_src34.csv
[Wed Jun  5 12:59:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14405_pi14-548_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14405_pi14-548_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 12:59:40 2013] Spatial fit model total counts = 17.949400, observed total counts = 19.000000
[Wed Jun  5 12:59:40 2013] Offset between fit and detection position for source 2 = 0.029182 pixels
[Wed Jun  5 12:59:40 2013] 17.005910 total counts/ 2.504510 bgd. counts: snr = 9.163229
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.029182 pixels
  Position = (804.5, 382.0) = 19 24 19.77 50 10 7.6
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 14.5 +/- 4.1
  Background counts = 2.5
  Rate = 0.0003 +/- 7e-05
[Wed Jun  5 12:59:40 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 12:59:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 12:59:40 2013] Assessing source extent using major axis lower bound
[Wed Jun  5 12:59:40 2013] Source does appear to be extended
[Wed Jun  5 12:59:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 12:59:40 2013] Deleting source due to low Poisson probability 1.0