[Fri May 10 14:04:38 2013] Detection parameters:
  Position = (865.2, 669.7) = 13 13 42.80 47 15 37.6
  Extent = 0.6" x 0.5", rotation angle = 14 degrees
  Source counts = 22.4 +/- 4.8
  Background counts = 0.6
  Rate = 0.002 +/- 0.0005

[Fri May 10 14:04:38 2013] Off-axis axis estimate = 2.35'
[Fri May 10 14:27:36 2013] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Fri May 10 14:27:36 2013] Initial guess for spatial extent in simple fitting = 0.47"
[Fri May 10 14:27:36 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.059
[Fri May 10 14:27:36 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.47"
[Fri May 10 14:35:11 2013] fullrun_ccd7_acisf14398_pi14-548_cl_pass0_src1.ximg exists
[Fri May 10 14:35:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14398_pi14-548_cl_pass0_src1.csv
[Fri May 10 14:35:11 2013] fullrun_ccd7_acisf14398_pi14-548_cl_pass0_src1_1.ximg exists
[Fri May 10 14:35:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14398_pi14-548_cl_pass0_src1.csv
[Fri May 10 14:35:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14398_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14398_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 14:35:11 2013] fullrun_ccd7_acisf14398_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri May 10 14:35:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14398_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May 10 14:35:11 2013] fullrun_ccd7_acisf14398_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 10 14:35:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14398_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May 10 14:35:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14398_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14398_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 14:35:14 2013] Spatial fit model total counts = 21.848200, observed total counts = 24.000000
[Fri May 10 14:35:14 2013] Offset between fit and detection position for source 2 = 0.956184 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.956184 pixels
  Position = (865.9, 670.3) = 13 13 42.79 47 15 37.6
  Extent = 0.7 (0.5-1.0)" x 0.4 (0.2-0.5)", rotation angle = 357 (334-14) degrees
  Source counts = 21.2 +/- 4.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Fri May 10 14:35:14 2013] Vigneting correction estimate = 1.000000
[Fri May 10 14:35:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 14:35:14 2013] Assessing source extent using major axis lower bound
[Fri May 10 14:35:14 2013] Source does appear to be extended
[Fri May 10 14:35:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Fri May 10 15:05:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 15:05:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 15:05:43 2013] Initial guess for spatial extent in simple fitting = 0.53"
[Fri May 10 15:05:43 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.199
[Fri May 10 15:05:43 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.53"
[Fri May 10 15:12:05 2013] fullrun_ccd7_acisf14398_pi14-548_cl_pass1_src1.ximg exists
[Fri May 10 15:12:05 2013] fullrun_ccd7_acisf14398_pi14-548_cl_pass1_src1_1.ximg exists
[Fri May 10 15:12:05 2013] Fit fullrun_ccd7_acisf14398_pi14-548_cl_pass1_src1 appears to have run properly
[Fri May 10 15:12:05 2013] fullrun_ccd7_acisf14398_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri May 10 15:12:05 2013] fullrun_ccd7_acisf14398_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 10 15:12:05 2013] Fit fullrun_ccd7_acisf14398_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 10 15:12:09 2013] Spatial fit model total counts = 22.229900, observed total counts = 24.000000
[Fri May 10 15:12:09 2013] Offset between fit and detection position for source 2 = 0.016471 pixels
[Fri May 10 15:12:09 2013] 21.601200 total counts/ 0.000000 bgd. counts: snr = 112466900.790414
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016471 pixels
  Position = (865.9, 670.3) = 13 13 42.79 47 15 37.6
  Extent = 0.7 (0.5-1.0)" x 0.3 (0.2-0.5)", rotation angle = 355 (335-12) degrees
  Source counts = 21.6 +/- 4.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Fri May 10 15:12:09 2013] Vigneting correction estimate = 1.000000
[Fri May 10 15:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 15:12:09 2013] Assessing source extent using major axis lower bound
[Fri May 10 15:12:09 2013] Source does appear to be extended
[Fri May 10 15:12:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Fri May 10 15:17:21 2013] Writing source region out to fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2_src.reg
[Fri May 10 15:17:21 2013] Extracting stamp from image fullrun_ccd7_acisf14398_pi14-548_cl_sm2.00.img.gz, (835, 639) - (897, 701)
[Fri May 10 15:17:21 2013] Writing fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2.gif
[Fri May 10 15:17:23 2013] Size of ../../acisf14398/products/events/fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2_src.evt.gz[events] = 22 counts
[Fri May 10 15:17:23 2013] Mean chipx,y = (447.32, 375.95)
[Fri May 10 15:17:23 2013] Mean tdetx,y = (4364.32, 2077.95)
[Fri May 10 15:17:23 2013] chipx,y range = (431.00-461.00, 357.00-390.00)
[Fri May 10 15:17:23 2013] Size of ../../acisf14398/products/events/fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 12 counts
[Fri May 10 15:17:25 2013] Not generating rmf since there are only 21 counts
[Fri May 10 15:17:25 2013] arf not found, will run specextract
[Fri May 10 15:17:32 2013] ../../acisf14398/products/spectra/fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2.warf not found
[Fri May 10 15:17:32 2013] ../../acisf14398/products/spectra/fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2.wrmf not found
[Fri May 10 15:17:32 2013] Removal of ../../acisf14398/products/spectra/fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2.soff failed
[Fri May 10 15:21:23 2013] Spectrum 2 has only 22 counts, deleting rmf
[Fri May 10 15:21:23 2013] 230.154
[Fri May 10 15:21:26 2013] Updating aperture counts using extracted products
[Fri May 10 15:21:26 2013] Total counts from fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2_src.pi.gz = 22.00
[Fri May 10 15:21:26 2013] Total counts from fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2_bgd.pi.gz = 12.00
[Fri May 10 15:21:26 2013] Got source and background scale factors 0.000001, 0.000017
[Fri May 10 15:21:26 2013] User source parameters:
  Position = (865.9, 670.3) = 13 13 42.79 47 15 37.6
  Extent = 0.7 (0.5-1.0)" x 0.3 (0.2-0.5)", rotation angle = 355 (335-12) degrees
  Source aperture counts = 21.5 +/- 5.8
  Background aperture counts = 0.5
  Rate = 0.002 +/- 0.0006

[Fri May 10 15:21:28 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 15:21:28 2013] Using photon index=1.80, rate=0.00218, arf fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2.arf
[Fri May 10 15:21:28 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 15:21:28 2013] Updating source flux to 1.7e-14
[Fri May 10 15:21:34 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 10 15:21:35 2013] acisf14398/analysis//spectral/fullrun_ccd7_acisf14398_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete