[Thu Jun 20 18:48:38 2013] Detection parameters:
  Position = (312.5, 1057.4) = 18 13 46.09 -61 30 40.6
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 18.7 +/- 4.4
  Background counts = 0.3
  Rate = 0.002 +/- 0.0005

[Thu Jun 20 18:48:38 2013] Off-axis axis estimate = 3.89'
[Thu Jun 20 19:06:15 2013] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 19:06:15 2013] Initial guess for spatial extent in simple fitting = 0.80"
[Thu Jun 20 19:06:15 2013] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.833
[Thu Jun 20 19:06:15 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.80"
[Thu Jun 20 19:15:48 2013] fullrun_ccd1_acisf14389_pi14-548_cl_pass0_src2.ximg exists
[Thu Jun 20 19:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14389_pi14-548_cl_pass0_src2.csv
[Thu Jun 20 19:15:48 2013] fullrun_ccd1_acisf14389_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Jun 20 19:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14389_pi14-548_cl_pass0_src2.csv
[Thu Jun 20 19:15:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14389_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14389_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 19:15:48 2013] fullrun_ccd1_acisf14389_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 20 19:15:48 2013] fullrun_ccd1_acisf14389_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 20 19:15:48 2013] Fit fullrun_ccd1_acisf14389_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jun 20 19:22:48 2013] Spatial fit model total counts = 27.260500, observed total counts = 30.000000
[Thu Jun 20 19:22:48 2013] Offset between fit and detection position for source 6 = 0.433402 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.433402 pixels
  Position = (312.8, 1057.1) = 18 13 46.10 -61 30 41.0
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 26.9 +/- 5.2
  Background counts = 0.0
  Rate = 0.003 +/- 0.0006
[Thu Jun 20 19:22:48 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 19:22:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 19:22:48 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 19:22:48 2013] Source does appear to be extended
[Thu Jun 20 19:22:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 19:36:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 19:36:09 2013] Initial guess for spatial extent in simple fitting = 0.71"
[Thu Jun 20 19:36:09 2013] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.602
[Thu Jun 20 19:36:09 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.71"
[Thu Jun 20 19:46:26 2013] fullrun_ccd1_acisf14389_pi14-548_cl_pass1_src2.ximg exists
[Thu Jun 20 19:46:26 2013] fullrun_ccd1_acisf14389_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Jun 20 19:46:26 2013] Fit fullrun_ccd1_acisf14389_pi14-548_cl_pass1_src2 appears to have run properly
[Thu Jun 20 19:46:26 2013] fullrun_ccd1_acisf14389_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 20 19:46:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14389_pi14-548_cl_pass1_tfrozen_src2.csv
[Thu Jun 20 19:46:26 2013] fullrun_ccd1_acisf14389_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 20 19:46:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14389_pi14-548_cl_pass1_tfrozen_src2.csv
[Thu Jun 20 19:46:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14389_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14389_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 19:52:06 2013] Spatial fit model total counts = 26.586300, observed total counts = 30.000000
[Thu Jun 20 19:52:06 2013] Offset between fit and detection position for source 6 = 0.100342 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.100342 pixels
  Position = (312.9, 1057.2) = 18 13 46.10 -61 30 41.0
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 26.1 +/- 5.1
  Background counts = 0.0
  Rate = 0.003 +/- 0.0006
[Thu Jun 20 19:52:06 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 19:52:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 19:52:06 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 19:52:06 2013] Source does appear to be extended
[Thu Jun 20 19:52:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 19:57:38 2013] Writing source region out to fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6_src.reg
[Thu Jun 20 19:57:38 2013] Extracting stamp from image fullrun_ccd1_acisf14389_pi14-548_cl_sm2.00.img.gz, (281, 1026) - (345, 1089)
[Thu Jun 20 19:57:38 2013] Writing fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6.gif
[Thu Jun 20 19:57:58 2013] Size of ../../acisf14389/products/events/fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6_src.evt.gz[events] = 29 counts
[Thu Jun 20 19:57:58 2013] Mean chipx,y = (253.31, 953.72)
[Thu Jun 20 19:57:58 2013] Mean tdetx,y = (4178.28, 4360.31)
[Thu Jun 20 19:57:58 2013] chipx,y range = (237.00-273.00, 938.00-972.00)
[Thu Jun 20 19:57:58 2013] Size of ../../acisf14389/products/events/fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 4 counts
[Thu Jun 20 19:57:59 2013] Not generating rmf since there are only 26 counts
[Thu Jun 20 19:57:59 2013] arf not found, will run specextract
[Thu Jun 20 19:58:26 2013] ../../acisf14389/products/spectra/fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6.warf not found
[Thu Jun 20 19:58:26 2013] ../../acisf14389/products/spectra/fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6.wrmf not found
[Thu Jun 20 19:58:26 2013] Removal of ../../acisf14389/products/spectra/fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6.soff failed
[Thu Jun 20 20:00:14 2013] Spectrum 6 has only 26 counts, deleting rmf
[Thu Jun 20 20:00:14 2013] 188.023
[Thu Jun 20 20:07:22 2013] Updating aperture counts using extracted products
[Thu Jun 20 20:07:22 2013] Total counts from fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6_src.pi.gz = 29.00
[Thu Jun 20 20:07:22 2013] Total counts from fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6_bgd.pi.gz = 4.00
[Thu Jun 20 20:07:22 2013] Got source and background scale factors 0.000001, 0.000018
[Thu Jun 20 20:07:22 2013] User source parameters:
  Position = (312.9, 1057.2) = 18 13 46.10 -61 30 41.0
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source aperture counts = 28.7 +/- 6.5
  Background aperture counts = 0.3
  Rate = 0.003 +/- 0.0007

[Thu Jun 20 20:07:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 20:07:22 2013] Using photon index=1.80, rate=0.00295, arf fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6.arf
[Thu Jun 20 20:07:22 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 20 20:07:22 2013] Updating source flux to 3.6e-14
[Thu Jun 20 20:07:26 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 20 20:07:27 2013] acisf14389/analysis//spectral/fullrun_ccd1_acisf14389_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete