[Fri May  3 08:02:15 2013] Detection parameters:
  Position = (608.9, 1038.7) = 10 5 11.42 -7 44 59.6
  Extent = 0.5" x 0.5", rotation angle = 178 degrees
  Source counts = 14.0 +/- 4.0
  Background counts = 2.0
  Rate = 0.0001 +/- 3e-05

[Fri May  3 08:02:15 2013] Off-axis axis estimate = 1.95'
[Fri May  3 08:39:20 2013] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri May  3 08:39:20 2013] Initial guess for spatial extent in simple fitting = 0.42"
[Fri May  3 08:39:20 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.807
[Fri May  3 08:39:20 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 0.42"
[Fri May  3 09:12:49 2013] fullrun_ccd6_acisf14383_pi14-548_cl_pass0_src26.ximg exists
[Fri May  3 09:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14383_pi14-548_cl_pass0_src26.csv
[Fri May  3 09:12:49 2013] fullrun_ccd6_acisf14383_pi14-548_cl_pass0_src26_1.ximg exists
[Fri May  3 09:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14383_pi14-548_cl_pass0_src26.csv
[Fri May  3 09:12:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14383_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14383_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 09:12:50 2013] fullrun_ccd6_acisf14383_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Fri May  3 09:12:50 2013] fullrun_ccd6_acisf14383_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Fri May  3 09:12:50 2013] Fit fullrun_ccd6_acisf14383_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Fri May  3 11:39:31 2013] Spatial fit model total counts = 20.201800, observed total counts = 22.000000
[Fri May  3 11:39:31 2013] Offset between fit and detection position for source 14 = 0.771376 pixels
[Fri May  3 11:39:31 2013] 19.416770 total counts/ 4.073870 bgd. counts: snr = 7.601580
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.771376 pixels
  Position = (609.5, 1039.2) = 10 5 11.42 -7 44 59.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 15.3 +/- 4.4
  Background counts = 4.1
  Rate = 0.0001 +/- 4e-05
[Fri May  3 11:39:31 2013] Vigneting correction estimate = 1.000000
[Fri May  3 11:39:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 11:39:31 2013] Assessing source extent using major axis lower bound
[Fri May  3 11:39:31 2013] Source does appear to be extended
[Fri May  3 11:39:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 12:15:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 12:15:07 2013] Initial guess for spatial extent in simple fitting = 0.49"
[Fri May  3 12:15:07 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.001
[Fri May  3 12:15:07 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 0.49"
[Fri May  3 12:50:18 2013] fullrun_ccd6_acisf14383_pi14-548_cl_pass1_src25.ximg exists
[Fri May  3 12:50:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14383_pi14-548_cl_pass1_src25.csv
[Fri May  3 12:50:18 2013] fullrun_ccd6_acisf14383_pi14-548_cl_pass1_src25_1.ximg exists
[Fri May  3 12:50:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14383_pi14-548_cl_pass1_src25.csv
[Fri May  3 12:50:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14383_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14383_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:50:18 2013] fullrun_ccd6_acisf14383_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri May  3 12:50:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14383_pi14-548_cl_pass1_tfrozen_src25.csv
[Fri May  3 12:50:18 2013] fullrun_ccd6_acisf14383_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May  3 12:50:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14383_pi14-548_cl_pass1_tfrozen_src25.csv
[Fri May  3 12:50:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14383_pi14-548_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14383_pi14-548_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 15:21:35 2013] Spatial fit model total counts = 18.414500, observed total counts = 22.000000
[Fri May  3 15:21:35 2013] Offset between fit and detection position for source 14 = 0.015825 pixels
[Fri May  3 15:21:35 2013] 17.305420 total counts/ 1.557920 bgd. counts: snr = 12.616504
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.015825 pixels
  Position = (609.5, 1039.2) = 10 5 11.42 -7 44 59.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 15.7 +/- 4.2
  Background counts = 1.6
  Rate = 0.0001 +/- 3e-05
[Fri May  3 15:21:35 2013] Vigneting correction estimate = 1.000000
[Fri May  3 15:21:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 15:21:35 2013] Assessing source extent using major axis lower bound
[Fri May  3 15:21:35 2013] Source does appear to be extended
[Fri May  3 15:21:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:25:10 2013] Writing source region out to fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14_src.reg
[Fri May  3 15:25:10 2013] Extracting stamp from image fullrun_ccd6_acisf14383_pi14-548_cl_sm2.00.img.gz, (585, 1015) - (634, 1064)
[Fri May  3 15:25:10 2013] Writing fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14.gif
[Fri May  3 15:38:50 2013] Size of ../../acisf14383/products/events/fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14_src.evt.gz[events] = 16 counts
[Fri May  3 15:38:50 2013] Mean chipx,y = (1011.31, 599.56)
[Fri May  3 15:38:50 2013] Mean tdetx,y = (3886.31, 2301.56)
[Fri May  3 15:38:50 2013] chipx,y range = (1001.00-1022.00, 581.00-614.00)
[Fri May  3 15:38:50 2013] Size of ../../acisf14383/products/events/fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 14 counts
[Fri May  3 15:38:51 2013] Not generating rmf since there are only 15 counts
[Fri May  3 15:38:51 2013] arf not found, will run specextract
[Fri May  3 15:39:18 2013] ../../acisf14383/products/spectra/fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14.warf not found
[Fri May  3 15:39:18 2013] ../../acisf14383/products/spectra/fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14.wrmf not found
[Fri May  3 15:39:18 2013] Removal of ../../acisf14383/products/spectra/fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14.soff failed
[Fri May  3 15:39:58 2013] Spectrum 14 has only 16 counts, deleting rmf
[Fri May  3 15:39:58 2013] 111.045
[Fri May  3 16:09:59 2013] Updating aperture counts using extracted products
[Fri May  3 16:09:59 2013] Total counts from fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14_src.pi.gz = 16.00
[Fri May  3 16:09:59 2013] Total counts from fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14_bgd.pi.gz = 14.00
[Fri May  3 16:09:59 2013] Got source and background scale factors 0.000001, 0.000011
[Fri May  3 16:09:59 2013] User source parameters:
  Position = (609.5, 1039.2) = 10 5 11.42 -7 44 59.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 14.8 +/- 5.1
  Background aperture counts = 1.2
  Rate = 0.0001 +/- 4e-05

[Fri May  3 16:10:00 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 16:10:00 2013] Using photon index=1.80, rate=0.000132, arf fullrun_ccd6_acisf14383_pi14-548_pass1_cl_src14.arf
[Fri May  3 16:10:00 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 16:10:00 2013] Updating source flux to 2.6e-15
[Fri May  3 16:10:35 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting