[Wed Feb 29 04:49:00 2012] Detection parameters:
  Position = (379.6, 300.6) = 1 51 6.00 -60 6 39.9
  Extent = 0.7" x 0.5", rotation angle = 104 degrees
  Source counts = 32.7 +/- 6.7
  Background counts = 12.3
  Rate = 0.001 +/- 0.0002

[Wed Feb 29 04:49:00 2012] Off-axis axis estimate = 10.13'
[Wed Feb 29 04:52:46 2012] Using EEF radius (= 4.55 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 04:52:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 04:52:46 2012] Initial guess for spatial extent in simple fitting = 4.55"
[Wed Feb 29 04:52:46 2012] source mask rpix=9.2, npix_max = 379, mask sum = 345, frac = 0.908
[Wed Feb 29 04:52:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 4.55"
[Wed Feb 29 05:05:25 2012] fullrun_ccd0_acisf14380_pi14-548_cl_pass0_src4.ximg exists
[Wed Feb 29 05:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14380_pi14-548_cl_pass0_src4.csv
[Wed Feb 29 05:05:25 2012] fullrun_ccd0_acisf14380_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Feb 29 05:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14380_pi14-548_cl_pass0_src4.csv
[Wed Feb 29 05:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14380_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14380_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 05:05:25 2012] fullrun_ccd0_acisf14380_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Feb 29 05:05:25 2012] fullrun_ccd0_acisf14380_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Feb 29 05:05:25 2012] Fit fullrun_ccd0_acisf14380_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Feb 29 05:59:04 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 45.901091 pixels away
[Wed Feb 29 05:59:04 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 05:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 05:59:04 2012] Assessing source extent using major
[Wed Feb 29 05:59:04 2012] Source does appear to be extended
[Wed Feb 29 05:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.34
[Wed Feb 29 05:59:21 2012] Using EEF radius (= 4.55 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 05:59:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 05:59:21 2012] Initial guess for spatial extent in simple fitting = 4.55"
[Wed Feb 29 05:59:21 2012] source mask rpix=9.2, npix_max = 379, mask sum = 345, frac = 0.908
[Wed Feb 29 05:59:21 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 4.55"
[Wed Feb 29 06:10:02 2012] fullrun_ccd0_acisf14380_pi14-548_cl_pass1_src4.ximg exists
[Wed Feb 29 06:10:02 2012] fullrun_ccd0_acisf14380_pi14-548_cl_pass1_src4_1.ximg exists
[Wed Feb 29 06:10:02 2012] Fit fullrun_ccd0_acisf14380_pi14-548_cl_pass1_src4 appears to have run properly
[Wed Feb 29 06:10:02 2012] fullrun_ccd0_acisf14380_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Wed Feb 29 06:10:02 2012] fullrun_ccd0_acisf14380_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Feb 29 06:10:02 2012] Fit fullrun_ccd0_acisf14380_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Feb 29 06:54:08 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 53.012033 pixels away
[Wed Feb 29 06:54:08 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 06:54:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 06:54:08 2012] Assessing source extent using major
[Wed Feb 29 06:54:08 2012] Source does appear to be extended
[Wed Feb 29 06:54:08 2012] Computing asymmetry using major and minor axis, asym = 1.34
[Wed Feb 29 06:54:26 2012] Writing source region out to fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5_src.reg
[Wed Feb 29 06:54:26 2012] Extracting stamp from image fullrun_ccd0_acisf14380_pi14-548_cl_sm2.00.img.gz, (349, 270) - (410, 331)
[Wed Feb 29 06:54:26 2012] Writing fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5.gif
[Wed Feb 29 06:56:48 2012] Size of ../../acisf14380/products/events/fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5_src.evt.gz[events] = 10 counts
[Wed Feb 29 06:56:48 2012] Mean chipx,y = (648.60, 94.30)
[Wed Feb 29 06:56:48 2012] Mean tdetx,y = (3155.30, 4483.40)
[Wed Feb 29 06:56:48 2012] chipx,y range = (632.00-667.00, 78.00-113.00)
[Wed Feb 29 06:56:48 2012] Size of ../../acisf14380/products/events/fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 24 counts
[Wed Feb 29 06:56:49 2012] Not generating rmf since there are only 32 counts
[Wed Feb 29 06:56:49 2012] arf not found, will run specextract
[Wed Feb 29 06:57:02 2012] ../../acisf14380/products/spectra/fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5.warf not found
[Wed Feb 29 06:57:02 2012] ../../acisf14380/products/spectra/fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5.wrmf not found
[Wed Feb 29 06:57:02 2012] Removal of ../../acisf14380/products/spectra/fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5.soff failed
[Wed Feb 29 06:57:47 2012] Spectrum 5 has only 33 counts, deleting rmf
[Wed Feb 29 06:57:47 2012] 155.37
[Wed Feb 29 07:25:03 2012] Updating aperture counts using extracted products
[Wed Feb 29 07:25:03 2012] Error reading totcts from fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Feb 29 07:25:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 07:25:03 2012] Using photon index=1.80, rate=0.00103, arf fullrun_ccd0_acisf14380_pi14-548_pass1_cl_src5.arf
[Wed Feb 29 07:25:03 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 07:25:03 2012] Updating source flux to 1.6e-14
[Wed Feb 29 07:25:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting