[Mon May 20 10:56:25 2013] Detection parameters:
  Position = (255.6, 320.1) = 23 58 11.35 -32 33 25.5
  Extent = 0.6" x 0.5", rotation angle = 54 degrees
  Source counts = 20.1 +/- 4.6
  Background counts = 0.9
  Rate = 0.0008 +/- 0.0002

[Mon May 20 10:56:25 2013] Off-axis axis estimate = 2.24'
[Mon May 20 11:24:13 2013] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Mon May 20 11:24:13 2013] Initial guess for spatial extent in simple fitting = 0.46"
[Mon May 20 11:24:13 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.102
[Mon May 20 11:24:13 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 0.46"
[Mon May 20 11:39:45 2013] fullrun_ccd7_acisf14378_pi14-548_cl_pass0_src11.ximg exists
[Mon May 20 11:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14378_pi14-548_cl_pass0_src11.csv
[Mon May 20 11:39:45 2013] fullrun_ccd7_acisf14378_pi14-548_cl_pass0_src11_1.ximg exists
[Mon May 20 11:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14378_pi14-548_cl_pass0_src11.csv
[Mon May 20 11:39:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14378_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14378_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 11:39:45 2013] fullrun_ccd7_acisf14378_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Mon May 20 11:39:45 2013] fullrun_ccd7_acisf14378_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 20 11:39:45 2013] Fit fullrun_ccd7_acisf14378_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May 20 11:39:51 2013] Spatial fit model total counts = 21.261400, observed total counts = 24.000000
[Mon May 20 11:39:51 2013] Offset between fit and detection position for source 8 = 0.917337 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.917337 pixels
  Position = (256.4, 320.6) = 23 58 11.34 -32 33 25.5
  Extent = 0.8 (0.6-1.1)" x 0.5 (0.4-0.7)", rotation angle = 110 (90-90) degrees
  Source counts = 20.3 +/- 4.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Mon May 20 11:39:51 2013] Vigneting correction estimate = 1.000000
[Mon May 20 11:39:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 11:39:51 2013] Assessing source extent using major axis lower bound
[Mon May 20 11:39:51 2013] Source does appear to be extended
[Mon May 20 11:39:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Mon May 20 12:04:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 12:04:23 2013] Initial guess for spatial extent in simple fitting = 0.65"
[Mon May 20 12:04:23 2013] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.671
[Mon May 20 12:04:23 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 0.65"
[Mon May 20 12:19:44 2013] fullrun_ccd7_acisf14378_pi14-548_cl_pass1_src11.ximg exists
[Mon May 20 12:19:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14378_pi14-548_cl_pass1_src11.csv
[Mon May 20 12:19:44 2013] fullrun_ccd7_acisf14378_pi14-548_cl_pass1_src11_1.ximg exists
[Mon May 20 12:19:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14378_pi14-548_cl_pass1_src11.csv
[Mon May 20 12:19:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14378_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14378_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:19:44 2013] fullrun_ccd7_acisf14378_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Mon May 20 12:19:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14378_pi14-548_cl_pass1_tfrozen_src11.csv
[Mon May 20 12:19:44 2013] fullrun_ccd7_acisf14378_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 20 12:19:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14378_pi14-548_cl_pass1_tfrozen_src11.csv
[Mon May 20 12:19:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14378_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14378_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:19:50 2013] Spatial fit model total counts = 21.058200, observed total counts = 24.000000
[Mon May 20 12:19:50 2013] Offset between fit and detection position for source 8 = 0.039277 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.039277 pixels
  Position = (256.4, 320.6) = 23 58 11.34 -32 33 25.5
  Extent = 0.8 (0.6-1.1)" x 0.5 (0.4-0.7)", rotation angle = 115 (217-90) degrees
  Source counts = 20.0 +/- 4.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Mon May 20 12:19:50 2013] Vigneting correction estimate = 1.000000
[Mon May 20 12:19:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 12:19:50 2013] Assessing source extent using major axis lower bound
[Mon May 20 12:19:50 2013] Source does appear to be extended
[Mon May 20 12:19:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Mon May 20 12:32:47 2013] Writing source region out to fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8_src.reg
[Mon May 20 12:32:47 2013] Extracting stamp from image fullrun_ccd7_acisf14378_pi14-548_cl_sm2.00.img.gz, (219, 283) - (294, 358)
[Mon May 20 12:32:47 2013] Writing fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8.gif
[Mon May 20 12:35:49 2013] Size of ../../acisf14378/products/events/fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8_src.evt.gz[events] = 21 counts
[Mon May 20 12:35:49 2013] Mean chipx,y = (107.24, 235.14)
[Mon May 20 12:35:49 2013] Mean tdetx,y = (4024.24, 1937.14)
[Mon May 20 12:35:49 2013] chipx,y range = (88.00-123.00, 219.00-253.00)
[Mon May 20 12:35:49 2013] Size of ../../acisf14378/products/events/fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 21 counts
[Mon May 20 12:35:51 2013] Not generating rmf since there are only 20 counts
[Mon May 20 12:35:51 2013] arf not found, will run specextract
[Mon May 20 12:35:58 2013] ../../acisf14378/products/spectra/fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8.warf not found
[Mon May 20 12:35:58 2013] ../../acisf14378/products/spectra/fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8.wrmf not found
[Mon May 20 12:35:58 2013] Removal of ../../acisf14378/products/spectra/fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8.soff failed
[Mon May 20 12:39:11 2013] Spectrum 8 has only 20 counts, deleting rmf
[Mon May 20 12:39:11 2013] 227.898
[Mon May 20 12:39:17 2013] Updating aperture counts using extracted products
[Mon May 20 12:39:17 2013] Total counts from fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8_src.pi.gz = 21.00
[Mon May 20 12:39:17 2013] Total counts from fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8_bgd.pi.gz = 21.00
[Mon May 20 12:39:17 2013] Got source and background scale factors 0.000001, 0.000025
[Mon May 20 12:39:17 2013] User source parameters:
  Position = (256.4, 320.6) = 23 58 11.34 -32 33 25.5
  Extent = 0.8 (0.6-1.1)" x 0.5 (0.4-0.7)", rotation angle = 115 (217-90) degrees
  Source aperture counts = 20.0 +/- 5.7
  Background aperture counts = 1.0
  Rate = 0.0008 +/- 0.0002

[Mon May 20 12:39:19 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 12:39:19 2013] Using photon index=1.80, rate=0.000811, arf fullrun_ccd7_acisf14378_pi14-548_pass1_cl_src8.arf
[Mon May 20 12:39:19 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 20 12:39:19 2013] Updating source flux to 6.3e-15
[Mon May 20 12:39:26 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting