[Mon May 20 10:55:56 2013] Detection parameters:
  Position = (931.8, 1007.9) = 23 57 56.52 -32 35 59.6
  Extent = 0.7" x 0.5", rotation angle = 131 degrees
  Source counts = 20.2 +/- 4.6
  Background counts = 0.8
  Rate = 0.0008 +/- 0.0002

[Mon May 20 10:55:56 2013] Off-axis axis estimate = 2.75'
[Mon May 20 11:08:13 2013] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Mon May 20 11:08:13 2013] Initial guess for spatial extent in simple fitting = 0.53"
[Mon May 20 11:08:13 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.899
[Mon May 20 11:08:13 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.53"
[Mon May 20 11:24:12 2013] fullrun_ccd6_acisf14378_pi14-548_cl_pass0_src9.ximg exists
[Mon May 20 11:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14378_pi14-548_cl_pass0_src9.csv
[Mon May 20 11:24:12 2013] fullrun_ccd6_acisf14378_pi14-548_cl_pass0_src9_1.ximg exists
[Mon May 20 11:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14378_pi14-548_cl_pass0_src9.csv
[Mon May 20 11:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14378_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14378_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 11:24:12 2013] fullrun_ccd6_acisf14378_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon May 20 11:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14378_pi14-548_cl_pass0_tfrozen_src9.csv
[Mon May 20 11:24:12 2013] fullrun_ccd6_acisf14378_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon May 20 11:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14378_pi14-548_cl_pass0_tfrozen_src9.csv
[Mon May 20 11:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14378_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14378_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 11:39:49 2013] Spatial fit model total counts = 19.633300, observed total counts = 22.000000
[Mon May 20 11:39:49 2013] Offset between fit and detection position for source 9 = 0.466664 pixels
[Mon May 20 11:39:49 2013] 20.450097 total counts/ 0.323997 bgd. counts: snr = 35.358117
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.466664 pixels
  Position = (932.1, 1008.2) = 23 57 56.52 -32 35 59.7
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 20.1 +/- 4.5
  Background counts = 0.3
  Rate = 0.0008 +/- 0.0002
[Mon May 20 11:39:49 2013] Vigneting correction estimate = 1.000000
[Mon May 20 11:39:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 11:39:49 2013] Assessing source extent using major axis lower bound
[Mon May 20 11:39:49 2013] Source does appear to be extended
[Mon May 20 11:39:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 11:48:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 11:48:57 2013] Initial guess for spatial extent in simple fitting = 0.74"
[Mon May 20 11:48:57 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Mon May 20 11:48:57 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.74"
[Mon May 20 12:04:23 2013] fullrun_ccd6_acisf14378_pi14-548_cl_pass1_src9.ximg exists
[Mon May 20 12:04:23 2013] fullrun_ccd6_acisf14378_pi14-548_cl_pass1_src9_1.ximg exists
[Mon May 20 12:04:23 2013] Fit fullrun_ccd6_acisf14378_pi14-548_cl_pass1_src9 appears to have run properly
[Mon May 20 12:04:23 2013] fullrun_ccd6_acisf14378_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon May 20 12:04:23 2013] fullrun_ccd6_acisf14378_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May 20 12:04:23 2013] Fit fullrun_ccd6_acisf14378_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon May 20 12:19:48 2013] Spatial fit model total counts = 20.244500, observed total counts = 22.000000
[Mon May 20 12:19:48 2013] Offset between fit and detection position for source 9 = 0.101670 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.101670 pixels
  Position = (932.2, 1008.2) = 23 57 56.52 -32 35 59.7
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 21.0 +/- 4.6
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Mon May 20 12:19:48 2013] Vigneting correction estimate = 1.000000
[Mon May 20 12:19:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 12:19:48 2013] Assessing source extent using major axis lower bound
[Mon May 20 12:19:48 2013] Source does appear to be extended
[Mon May 20 12:19:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 12:24:32 2013] Writing source region out to fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9_src.reg
[Mon May 20 12:24:32 2013] Extracting stamp from image fullrun_ccd6_acisf14378_pi14-548_cl_sm2.00.img.gz, (896, 972) - (968, 1044)
[Mon May 20 12:24:32 2013] Writing fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9.gif
[Mon May 20 12:29:43 2013] Size of ../../acisf14378/products/events/fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9_src.evt.gz[events] = 21 counts
[Mon May 20 12:29:43 2013] Mean chipx,y = (956.76, 691.62)
[Mon May 20 12:29:43 2013] Mean tdetx,y = (3831.76, 2393.62)
[Mon May 20 12:29:43 2013] chipx,y range = (942.00-974.00, 672.00-707.00)
[Mon May 20 12:29:43 2013] Size of ../../acisf14378/products/events/fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 12 counts
[Mon May 20 12:29:45 2013] Not generating rmf since there are only 21 counts
[Mon May 20 12:29:45 2013] arf not found, will run specextract
[Mon May 20 12:30:14 2013] ../../acisf14378/products/spectra/fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9.warf not found
[Mon May 20 12:30:14 2013] ../../acisf14378/products/spectra/fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9.wrmf not found
[Mon May 20 12:30:14 2013] Removal of ../../acisf14378/products/spectra/fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9.soff failed
[Mon May 20 12:32:47 2013] Spectrum 9 has only 21 counts, deleting rmf
[Mon May 20 12:32:47 2013] 206.367
[Mon May 20 12:39:15 2013] Updating aperture counts using extracted products
[Mon May 20 12:39:15 2013] Total counts from fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9_src.pi.gz = 21.00
[Mon May 20 12:39:15 2013] Total counts from fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9_bgd.pi.gz = 12.00
[Mon May 20 12:39:15 2013] Got source and background scale factors 0.000002, 0.000022
[Mon May 20 12:39:15 2013] User source parameters:
  Position = (932.2, 1008.2) = 23 57 56.52 -32 35 59.7
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source aperture counts = 20.0 +/- 5.7
  Background aperture counts = 1.0
  Rate = 0.0008 +/- 0.0002

[Mon May 20 12:39:16 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 12:39:16 2013] Using photon index=1.80, rate=0.000852, arf fullrun_ccd6_acisf14378_pi14-548_pass1_cl_src9.arf
[Mon May 20 12:39:16 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 20 12:39:16 2013] Updating source flux to 9.3e-15
[Mon May 20 12:39:23 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting