[Mon Dec 19 07:07:15 2011] Detection parameters:
  Position = (539.9, 119.6) = 4 41 50.76 -48 57 43.1
  Extent = 0.5" x 0.5", rotation angle = 121 degrees
  Source counts = 144.0 +/- 12.0
  Background counts = 1.0
  Rate = 0.006 +/- 0.0005

[Mon Dec 19 07:07:16 2011] Off-axis axis estimate = 3.23'
[Mon Dec 19 08:03:25 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 08:03:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 08:03:25 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Mon Dec 19 08:03:25 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.949
[Mon Dec 19 08:03:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.63"
[Mon Dec 19 08:12:00 2011] fullrun_ccd3_acisf14372_pi14-548_cl_pass0_src1.ximg exists
[Mon Dec 19 08:12:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14372_pi14-548_cl_pass0_src1.csv
[Mon Dec 19 08:12:00 2011] fullrun_ccd3_acisf14372_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Dec 19 08:12:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14372_pi14-548_cl_pass0_src1.csv
[Mon Dec 19 08:12:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14372_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14372_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 08:12:00 2011] fullrun_ccd3_acisf14372_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 19 08:12:00 2011] fullrun_ccd3_acisf14372_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 19 08:12:00 2011] Fit fullrun_ccd3_acisf14372_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 19 08:37:33 2011] Spatial fit model total counts = 146.716000, observed total counts = 148.000000
[Mon Dec 19 08:37:33 2011] Offset between fit and detection position for source 4 = 0.761139 pixels
[Mon Dec 19 08:37:33 2011] 147.238500 total counts/ 11.551500 bgd. counts: snr = 39.922621
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.761139 pixels
  Position = (540.4, 120.1) = 4 41 50.76 -48 57 43.1
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 135.7 +/- 12.1
  Background counts = 11.6
  Rate = 0.006 +/- 0.0005
[Mon Dec 19 08:37:33 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 08:37:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 08:37:33 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 08:37:33 2011] Source does appear to be extended
[Mon Dec 19 08:37:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 09:26:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 09:26:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 09:26:35 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Mon Dec 19 09:26:35 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.863
[Mon Dec 19 09:26:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.55"
[Mon Dec 19 09:34:41 2011] fullrun_ccd3_acisf14372_pi14-548_cl_pass1_src1.ximg exists
[Mon Dec 19 09:34:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14372_pi14-548_cl_pass1_src1.csv
[Mon Dec 19 09:34:41 2011] fullrun_ccd3_acisf14372_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Dec 19 09:34:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14372_pi14-548_cl_pass1_src1.csv
[Mon Dec 19 09:34:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14372_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14372_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 09:34:42 2011] fullrun_ccd3_acisf14372_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 09:34:42 2011] fullrun_ccd3_acisf14372_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 09:34:42 2011] Fit fullrun_ccd3_acisf14372_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 10:02:02 2011] Spatial fit model total counts = 145.714000, observed total counts = 146.000000
[Mon Dec 19 10:02:02 2011] Offset between fit and detection position for source 4 = 0.022535 pixels
[Mon Dec 19 10:02:02 2011] 146.304390 total counts/ 8.364390 bgd. counts: snr = 47.695025
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.022535 pixels
  Position = (540.4, 120.1) = 4 41 50.76 -48 57 43.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 137.9 +/- 12.1
  Background counts = 8.4
  Rate = 0.006 +/- 0.0005
[Mon Dec 19 10:02:02 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 10:02:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 10:02:02 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 10:02:02 2011] Source does appear to be extended
[Mon Dec 19 10:02:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 10:17:55 2011] Writing source region out to fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4_src.reg
[Mon Dec 19 10:17:55 2011] Extracting stamp from image fullrun_ccd3_acisf14372_pi14-548_cl_sm2.00.img.gz, (515, 95) - (566, 146)
[Mon Dec 19 10:17:55 2011] Writing fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4.gif
[Mon Dec 19 10:17:57 2011] Size of ../../acisf14372/products/events/fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4_src.evt.gz[events] = 142 counts
[Mon Dec 19 10:17:57 2011] Mean chipx,y = (971.43, 799.92)
[Mon Dec 19 10:17:57 2011] Mean tdetx,y = (4332.08, 4032.43)
[Mon Dec 19 10:17:57 2011] chipx,y range = (951.00-989.00, 782.00-817.00)
[Mon Dec 19 10:17:57 2011] Size of ../../acisf14372/products/events/fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 9 counts
[Mon Dec 19 10:17:58 2011] rmf not found, will run specextract
[Mon Dec 19 10:17:58 2011] arf not found, will run specextract
[Mon Dec 19 10:18:32 2011] ../../acisf14372/products/spectra/fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4.warf not found
[Mon Dec 19 10:18:32 2011] ../../acisf14372/products/spectra/fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4.wrmf not found
[Mon Dec 19 10:18:32 2011] Removal of ../../acisf14372/products/spectra/fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4.soff failed
[Mon Dec 19 10:31:18 2011] Keeping rmf generated by specextract
[Mon Dec 19 10:31:18 2011] 198.768
[Mon Dec 19 10:32:45 2011] Updating aperture counts using extracted products
[Mon Dec 19 10:32:45 2011] Error reading totcts from fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Dec 19 10:32:45 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 10:32:45 2011] Using photon index=1.80, rate=0.0058, arf fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4.arf
[Mon Dec 19 10:32:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Dec 19 10:32:45 2011] Updating source flux to 6.9e-14
[Mon Dec 19 10:33:01 2011] Reading fit data from acisf14372/analysis//spectral/fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4_pl.csv
[Mon Dec 19 10:33:01 2011] Spectral fit parameter nH value = 6.60188e+20
[Mon Dec 19 10:33:01 2011] Spectral fit parameter PhoIndex value = 1.80588
[Mon Dec 19 10:33:01 2011] Failed to get F(0.3-8.0) from acisf14372/analysis//spectral/fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 10:33:01 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 10:33:01 2011] Using Nh = 6.6e+20, photon index=1.81, rate=0.0058, arf fullrun_ccd3_acisf14372_pi14-548_pass1_cl_src4.arf
[Mon Dec 19 10:33:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Dec 19 10:33:01 2011] Updating source flux to 6.6e-14