[Sun Dec 25 02:00:55 2011] Detection parameters:
  Position = (325.2, 239.3) = 4 42 0.93 -48 56 48.2
  Extent = 0.5" x 0.5", rotation angle = 157 degrees
  Source counts = 12.8 +/- 3.6
  Background counts = 0.2
  Rate = 0.0006 +/- 0.0002

[Sun Dec 25 02:00:55 2011] Off-axis axis estimate = 1.39'
[Sun Dec 25 02:35:17 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:35:17 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Dec 25 02:35:17 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.905
[Sun Dec 25 02:35:17 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.39"
[Sun Dec 25 02:42:56 2011] fullrun_ccd3_acisf14371_pi14-548_cl_pass0_src5.ximg exists
[Sun Dec 25 02:42:56 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf14371_pi14-548_cl_pass0_src5.csv
[Sun Dec 25 02:42:56 2011] fullrun_ccd3_acisf14371_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Dec 25 02:42:56 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf14371_pi14-548_cl_pass0_src5.csv
[Sun Dec 25 02:42:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14371_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14371_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:42:56 2011] fullrun_ccd3_acisf14371_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Dec 25 02:42:56 2011] fullrun_ccd3_acisf14371_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Dec 25 02:42:56 2011] Fit fullrun_ccd3_acisf14371_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Dec 25 04:07:04 2011] Spatial fit model total counts = 13.021200, observed total counts = 14.000000
[Sun Dec 25 04:07:04 2011] Offset between fit and detection position for source 5 = 0.699620 pixels
[Sun Dec 25 04:07:04 2011] 12.564800 total counts/ 0.000000 bgd. counts: snr = 206271286340764.968750
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.699620 pixels
  Position = (325.7, 239.8) = 4 42 0.93 -48 56 48.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.6 +/- 3.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Dec 25 04:07:04 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 04:07:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 04:07:04 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 04:07:04 2011] Source does appear to be extended
[Sun Dec 25 04:07:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 04:37:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 04:37:38 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Dec 25 04:37:38 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.141
[Sun Dec 25 04:37:38 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.44"
[Sun Dec 25 04:44:12 2011] fullrun_ccd3_acisf14371_pi14-548_cl_pass1_src5.ximg exists
[Sun Dec 25 04:44:12 2011] fullrun_ccd3_acisf14371_pi14-548_cl_pass1_src5_1.ximg exists
[Sun Dec 25 04:44:12 2011] Fit fullrun_ccd3_acisf14371_pi14-548_cl_pass1_src5 appears to have run properly
[Sun Dec 25 04:44:12 2011] fullrun_ccd3_acisf14371_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun Dec 25 04:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14371_pi14-548_cl_pass1_tfrozen_src5.csv
[Sun Dec 25 04:44:12 2011] fullrun_ccd3_acisf14371_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Dec 25 04:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14371_pi14-548_cl_pass1_tfrozen_src5.csv
[Sun Dec 25 04:44:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14371_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14371_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 06:36:59 2011] Spatial fit model total counts = 12.512900, observed total counts = 14.000000
[Sun Dec 25 06:36:59 2011] Offset between fit and detection position for source 5 = 0.009298 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.009298 pixels
  Position = (325.7, 239.9) = 4 42 0.93 -48 56 48.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Dec 25 06:36:59 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 06:36:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 06:36:59 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 06:36:59 2011] Source does appear to be extended
[Sun Dec 25 06:36:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 06:51:46 2011] Writing source region out to fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5_src.reg
[Sun Dec 25 06:51:46 2011] Extracting stamp from image fullrun_ccd3_acisf14371_pi14-548_cl_sm2.00.img.gz, (305, 219) - (346, 260)
[Sun Dec 25 06:51:46 2011] Writing fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5.gif
[Sun Dec 25 06:53:58 2011] Size of ../../acisf14371/products/events/fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5_src.evt.gz[events] = 13 counts
[Sun Dec 25 06:53:58 2011] Mean chipx,y = (792.38, 962.62)
[Sun Dec 25 06:53:58 2011] Mean tdetx,y = (4169.38, 3853.38)
[Sun Dec 25 06:53:58 2011] chipx,y range = (778.00-810.00, 945.00-973.00)
[Sun Dec 25 06:53:58 2011] Size of ../../acisf14371/products/events/fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 1 counts
[Sun Dec 25 06:53:59 2011] Not generating rmf since there are only 12 counts
[Sun Dec 25 06:53:59 2011] arf not found, will run specextract
[Sun Dec 25 06:54:27 2011] ../../acisf14371/products/spectra/fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5.warf not found
[Sun Dec 25 06:54:27 2011] ../../acisf14371/products/spectra/fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5.wrmf not found
[Sun Dec 25 06:54:27 2011] Removal of ../../acisf14371/products/spectra/fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5.soff failed
[Sun Dec 25 07:02:11 2011] Spectrum 5 has only 12 counts, deleting rmf
[Sun Dec 25 07:02:11 2011] 202.273
[Sun Dec 25 07:04:48 2011] Updating aperture counts using extracted products
[Sun Dec 25 07:04:48 2011] Error reading totcts from fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Dec 25 07:04:48 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 07:04:48 2011] Using photon index=1.80, rate=0.000586, arf fullrun_ccd3_acisf14371_pi14-548_pass1_cl_src5.arf
[Sun Dec 25 07:04:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 25 07:04:48 2011] Updating source flux to 6.9e-15
[Sun Dec 25 07:05:01 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting