[Sun Dec 25 02:00:24 2011] Detection parameters:
  Position = (1041.3, 919.3) = 4 42 14.15 -48 54 5.3
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 11.7 +/- 3.5
  Background counts = 0.3
  Rate = 0.0006 +/- 0.0002

[Sun Dec 25 02:00:24 2011] Off-axis axis estimate = 2.09'
[Sun Dec 25 02:27:23 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:27:23 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Dec 25 02:27:23 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.160
[Sun Dec 25 02:27:23 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.44"
[Sun Dec 25 02:35:17 2011] fullrun_ccd2_acisf14371_pi14-548_cl_pass0_src6.ximg exists
[Sun Dec 25 02:35:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14371_pi14-548_cl_pass0_src6.csv
[Sun Dec 25 02:35:17 2011] fullrun_ccd2_acisf14371_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Dec 25 02:35:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14371_pi14-548_cl_pass0_src6.csv
[Sun Dec 25 02:35:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14371_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14371_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:35:17 2011] fullrun_ccd2_acisf14371_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Dec 25 02:35:17 2011] fullrun_ccd2_acisf14371_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Dec 25 02:35:17 2011] Fit fullrun_ccd2_acisf14371_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Dec 25 04:07:03 2011] Spatial fit model total counts = 12.903900, observed total counts = 13.000000
[Sun Dec 25 04:07:03 2011] Offset between fit and detection position for source 6 = 0.711782 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.711782 pixels
  Position = (1041.8, 919.9) = 4 42 14.15 -48 54 5.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 12.6 +/- 3.6
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Dec 25 04:07:03 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 04:07:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 04:07:03 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 04:07:03 2011] Source does appear to be extended
[Sun Dec 25 04:07:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 04:27:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 04:27:58 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sun Dec 25 04:27:58 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.937
[Sun Dec 25 04:27:58 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.52"
[Sun Dec 25 04:37:37 2011] fullrun_ccd2_acisf14371_pi14-548_cl_pass1_src6.ximg exists
[Sun Dec 25 04:37:37 2011] fullrun_ccd2_acisf14371_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Dec 25 04:37:37 2011] Fit fullrun_ccd2_acisf14371_pi14-548_cl_pass1_src6 appears to have run properly
[Sun Dec 25 04:37:37 2011] fullrun_ccd2_acisf14371_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Dec 25 04:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14371_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Dec 25 04:37:37 2011] fullrun_ccd2_acisf14371_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Dec 25 04:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14371_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Dec 25 04:37:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14371_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14371_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 06:36:58 2011] Spatial fit model total counts = 11.477200, observed total counts = 13.000000
[Sun Dec 25 06:36:58 2011] Offset between fit and detection position for source 6 = 0.054185 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.054185 pixels
  Position = (1041.9, 919.9) = 4 42 14.15 -48 54 5.3
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 11.1 +/- 3.3
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0002
[Sun Dec 25 06:36:58 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 06:36:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 06:36:58 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 06:36:58 2011] Source does appear to be extended
[Sun Dec 25 06:36:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 06:44:47 2011] Writing source region out to fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6_src.reg
[Sun Dec 25 06:44:47 2011] Extracting stamp from image fullrun_ccd2_acisf14371_pi14-548_cl_sm2.00.img.gz, (1016, 894) - (1067, 945)
[Sun Dec 25 06:44:47 2011] Writing fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6.gif
[Sun Dec 25 06:47:35 2011] Size of ../../acisf14371/products/events/fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6_src.evt.gz[events] = 12 counts
[Sun Dec 25 06:47:35 2011] Mean chipx,y = (631.50, 973.08)
[Sun Dec 25 06:47:35 2011] Mean tdetx,y = (4034.08, 3454.50)
[Sun Dec 25 06:47:35 2011] chipx,y range = (618.00-652.00, 959.00-992.00)
[Sun Dec 25 06:47:35 2011] Size of ../../acisf14371/products/events/fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 4 counts
[Sun Dec 25 06:47:37 2011] Not generating rmf since there are only 11 counts
[Sun Dec 25 06:47:37 2011] arf not found, will run specextract
[Sun Dec 25 06:48:07 2011] ../../acisf14371/products/spectra/fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6.warf not found
[Sun Dec 25 06:48:07 2011] ../../acisf14371/products/spectra/fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6.wrmf not found
[Sun Dec 25 06:48:07 2011] Removal of ../../acisf14371/products/spectra/fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6.soff failed
[Sun Dec 25 06:51:46 2011] Spectrum 6 has only 11 counts, deleting rmf
[Sun Dec 25 06:51:46 2011] 189.279
[Sun Dec 25 07:04:47 2011] Updating aperture counts using extracted products
[Sun Dec 25 07:04:47 2011] Error reading totcts from fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Dec 25 07:04:47 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 07:04:47 2011] Using photon index=1.80, rate=0.000536, arf fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6.arf
[Sun Dec 25 07:04:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 25 07:04:47 2011] Updating source flux to 6.8e-15
[Sun Dec 25 07:05:00 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Dec 25 07:05:01 2011] acisf14371/analysis//spectral/fullrun_ccd2_acisf14371_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete