[Sun Dec 25 01:59:54 2011] Detection parameters:
  Position = (841.8, 1212.6) = 4 41 17.45 -48 56 50.4
  Extent = 1.2" x 0.8", rotation angle = 129 degrees
  Source counts = 116.0 +/- 11.0
  Background counts = 6.0
  Rate = 0.006 +/- 0.0005

[Sun Dec 25 01:59:54 2011] Off-axis axis estimate = 8.09'
[Sun Dec 25 02:19:53 2011] Using EEF radius (= 2.89 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:19:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 02:19:53 2011] Initial guess for spatial extent in simple fitting = 2.89"
[Sun Dec 25 02:19:53 2011] source mask rpix=5.9, npix_max = 162, mask sum = 166, frac = 1.020
[Sun Dec 25 02:19:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.89"
[Sun Dec 25 02:27:23 2011] fullrun_ccd1_acisf14371_pi14-548_cl_pass0_src1.ximg exists
[Sun Dec 25 02:27:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14371_pi14-548_cl_pass0_src1.csv
[Sun Dec 25 02:27:23 2011] fullrun_ccd1_acisf14371_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Dec 25 02:27:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14371_pi14-548_cl_pass0_src1.csv
[Sun Dec 25 02:27:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14371_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14371_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:27:23 2011] fullrun_ccd1_acisf14371_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 25 02:27:23 2011] fullrun_ccd1_acisf14371_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 25 02:27:23 2011] Fit fullrun_ccd1_acisf14371_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 04:07:02 2011] Spatial fit model total counts = 145.692000, observed total counts = 146.000000
[Sun Dec 25 04:07:02 2011] Offset between fit and detection position for source 3 = 0.876471 pixels
[Sun Dec 25 04:07:02 2011] 146.023580 total counts/ 8.424580 bgd. counts: snr = 47.406855
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.876471 pixels
  Position = (842.4, 1213.3) = 4 41 17.45 -48 56 50.3
  Extent = 2.6 (2.3-2.9)", rotation angle = 0
  Source counts = 137.6 +/- 12.1
  Background counts = 8.4
  Rate = 0.007 +/- 0.0006
[Sun Dec 25 04:07:02 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 04:07:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 04:07:02 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 04:07:02 2011] Source does appear to be extended
[Sun Dec 25 04:07:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 04:20:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 04:20:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 04:20:57 2011] Initial guess for spatial extent in simple fitting = 2.64"
[Sun Dec 25 04:20:57 2011] source mask rpix=5.4, npix_max = 137, mask sum = 132, frac = 0.958
[Sun Dec 25 04:20:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.64"
[Sun Dec 25 04:27:57 2011] fullrun_ccd1_acisf14371_pi14-548_cl_pass1_src1.ximg exists
[Sun Dec 25 04:27:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14371_pi14-548_cl_pass1_src1.csv
[Sun Dec 25 04:27:57 2011] fullrun_ccd1_acisf14371_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Dec 25 04:27:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14371_pi14-548_cl_pass1_src1.csv
[Sun Dec 25 04:27:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14371_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14371_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 04:27:58 2011] fullrun_ccd1_acisf14371_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 04:27:58 2011] fullrun_ccd1_acisf14371_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 04:27:58 2011] Fit fullrun_ccd1_acisf14371_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 06:36:57 2011] Spatial fit model total counts = 143.877000, observed total counts = 145.000000
[Sun Dec 25 06:36:57 2011] Offset between fit and detection position for source 3 = 0.182284 pixels
[Sun Dec 25 06:36:57 2011] 144.277040 total counts/ 4.121040 bgd. counts: snr = 69.041192
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.182284 pixels
  Position = (842.5, 1213.2) = 4 41 17.44 -48 56 50.3
  Extent = 2.7 (2.3-3.0)", rotation angle = 0
  Source counts = 140.2 +/- 12.0
  Background counts = 4.1
  Rate = 0.007 +/- 0.0006
[Sun Dec 25 06:36:57 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 06:36:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 06:36:57 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 06:36:57 2011] Source does appear to be extended
[Sun Dec 25 06:36:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 06:41:33 2011] Writing source region out to fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3_src.reg
[Sun Dec 25 06:41:33 2011] Extracting stamp from image fullrun_ccd1_acisf14371_pi14-548_cl_sm2.00.img.gz, (721, 1091) - (964, 1289)
[Sun Dec 25 06:41:33 2011] Writing fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3.gif
[Sun Dec 25 06:41:35 2011] Size of ../../acisf14371/products/events/fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3_src.evt.gz[events] = 144 counts
[Sun Dec 25 06:41:35 2011] Mean chipx,y = (44.74, 137.36)
[Sun Dec 25 06:41:35 2011] Mean tdetx,y = (4994.64, 4151.74)
[Sun Dec 25 06:41:35 2011] chipx,y range = (18.00-73.00, 108.00-158.00)
[Sun Dec 25 06:41:35 2011] Size of ../../acisf14371/products/events/fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 50 counts
[Sun Dec 25 06:41:36 2011] rmf not found, will run specextract
[Sun Dec 25 06:41:36 2011] arf not found, will run specextract
[Sun Dec 25 06:41:51 2011] ../../acisf14371/products/spectra/fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3.warf not found
[Sun Dec 25 06:41:51 2011] ../../acisf14371/products/spectra/fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3.wrmf not found
[Sun Dec 25 06:41:51 2011] Removal of ../../acisf14371/products/spectra/fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3.soff failed
[Sun Dec 25 06:44:47 2011] Keeping rmf generated by specextract
[Sun Dec 25 06:44:47 2011] 166.208
[Sun Dec 25 07:04:47 2011] Updating aperture counts using extracted products
[Sun Dec 25 07:04:47 2011] Error reading totcts from fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Dec 25 07:04:47 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 07:04:47 2011] Using photon index=1.80, rate=0.00674, arf fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3.arf
[Sun Dec 25 07:04:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 25 07:04:47 2011] Updating source flux to 9.8e-14
[Sun Dec 25 07:05:00 2011] Reading fit data from acisf14371/analysis//spectral/fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3_pl.csv
[Sun Dec 25 07:05:00 2011] Spectral fit parameter nH value = 9.31782e+20
[Sun Dec 25 07:05:00 2011] Spectral fit parameter PhoIndex value = 2.26799
[Sun Dec 25 07:05:00 2011] Failed to get F(0.3-8.0) from acisf14371/analysis//spectral/fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Dec 25 07:05:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 07:05:00 2011] Using Nh = 9.3e+20, photon index=2.27, rate=0.00674, arf fullrun_ccd1_acisf14371_pi14-548_pass1_cl_src3.arf
[Sun Dec 25 07:05:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 25 07:05:00 2011] Updating source flux to 8.4e-14