[Sun May 19 15:46:04 2013] Detection parameters:
  Position = (192.6, 777.5) = 6 40 55.10 9 33 18.6
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 21.9 +/- 4.8
  Background counts = 1.1
  Rate = 0.0003 +/- 6e-05

[Sun May 19 15:46:05 2013] Off-axis axis estimate = 1.70'
[Sun May 19 21:39:01 2013] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun May 19 21:39:01 2013] Initial guess for spatial extent in simple fitting = 0.40"
[Sun May 19 21:39:01 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.287
[Sun May 19 21:39:01 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 0.40"
[Sun May 19 22:38:44 2013] fullrun_ccd3_acisf14368_pi14-548_cl_pass0_src43.ximg exists
[Sun May 19 22:38:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14368_pi14-548_cl_pass0_src43.csv
[Sun May 19 22:38:44 2013] fullrun_ccd3_acisf14368_pi14-548_cl_pass0_src43_1.ximg exists
[Sun May 19 22:38:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14368_pi14-548_cl_pass0_src43.csv
[Sun May 19 22:38:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14368_pi14-548_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14368_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 22:38:44 2013] fullrun_ccd3_acisf14368_pi14-548_cl_pass0_tfrozen_src43.ximg exists
[Sun May 19 22:38:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14368_pi14-548_cl_pass0_tfrozen_src43.csv
[Sun May 19 22:38:44 2013] fullrun_ccd3_acisf14368_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists
[Sun May 19 22:38:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14368_pi14-548_cl_pass0_tfrozen_src43.csv
[Sun May 19 22:38:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14368_pi14-548_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14368_pi14-548_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:16:29 2013] Spatial fit model total counts = 21.277400, observed total counts = 24.000000
[Mon May 20 01:16:29 2013] Offset between fit and detection position for source 30 = 0.702472 pixels
[Mon May 20 01:16:29 2013] 21.111800 total counts/ 0.000000 bgd. counts: snr = 380608473344891.562500
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.702472 pixels
  Position = (193.1, 778.0) = 6 40 55.10 9 33 18.6
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 21.1 +/- 4.6
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Mon May 20 01:16:29 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:16:29 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:16:29 2013] Source does appear to be extended
[Mon May 20 01:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 06:32:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 06:32:48 2013] Initial guess for spatial extent in simple fitting = 0.46"
[Mon May 20 06:32:48 2013] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.730
[Mon May 20 06:32:48 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 0.46"
[Mon May 20 07:26:44 2013] fullrun_ccd3_acisf14368_pi14-548_cl_pass1_src43.ximg exists
[Mon May 20 07:26:44 2013] fullrun_ccd3_acisf14368_pi14-548_cl_pass1_src43_1.ximg exists
[Mon May 20 07:26:44 2013] Fit fullrun_ccd3_acisf14368_pi14-548_cl_pass1_src43 appears to have run properly
[Mon May 20 07:26:45 2013] fullrun_ccd3_acisf14368_pi14-548_cl_pass1_tfrozen_src43.ximg exists
[Mon May 20 07:26:45 2013] fullrun_ccd3_acisf14368_pi14-548_cl_pass1_tfrozen_src43_1.ximg exists
[Mon May 20 07:26:45 2013] Fit fullrun_ccd3_acisf14368_pi14-548_cl_pass1_tfrozen_src43 appears to have run properly
[Mon May 20 09:37:00 2013] Spatial fit model total counts = 23.028500, observed total counts = 25.000000
[Mon May 20 09:37:00 2013] Offset between fit and detection position for source 30 = 0.005635 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.005635 pixels
  Position = (193.1, 778.0) = 6 40 55.10 9 33 18.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 22.8 +/- 4.8
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Mon May 20 09:37:00 2013] Vigneting correction estimate = 1.000000
[Mon May 20 09:37:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 09:37:00 2013] Assessing source extent using major axis lower bound
[Mon May 20 09:37:00 2013] Source does appear to be extended
[Mon May 20 09:37:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 11:58:26 2013] Writing source region out to fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30_src.reg
[Mon May 20 11:58:26 2013] Extracting stamp from image fullrun_ccd3_acisf14368_pi14-548_cl_sm2.00.img.gz, (174, 759) - (212, 797)
[Mon May 20 11:58:26 2013] Writing fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30.gif
[Mon May 20 12:23:15 2013] Size of ../../acisf14368/products/events/fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30_src.evt.gz[events] = 23 counts
[Mon May 20 12:23:15 2013] Mean chipx,y = (922.52, 812.83)
[Mon May 20 12:23:15 2013] Mean tdetx,y = (4319.17, 3983.52)
[Mon May 20 12:23:15 2013] chipx,y range = (908.00-940.00, 800.00-834.00)
[Mon May 20 12:23:15 2013] Size of ../../acisf14368/products/events/fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 2 counts
[Mon May 20 12:23:17 2013] Not generating rmf since there are only 22 counts
[Mon May 20 12:23:17 2013] arf not found, will run specextract
[Mon May 20 12:23:43 2013] ../../acisf14368/products/spectra/fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30.warf not found
[Mon May 20 12:23:43 2013] ../../acisf14368/products/spectra/fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30.wrmf not found
[Mon May 20 12:23:43 2013] Removal of ../../acisf14368/products/spectra/fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30.soff failed
[Mon May 20 12:31:39 2013] Spectrum 30 has only 23 counts, deleting rmf
[Mon May 20 12:31:39 2013] 201.369
[Mon May 20 12:36:17 2013] Updating aperture counts using extracted products
[Mon May 20 12:36:17 2013] Total counts from fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30_src.pi.gz = 23.00
[Mon May 20 12:36:17 2013] Total counts from fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30_bgd.pi.gz = 2.00
[Mon May 20 12:36:17 2013] Got source and background scale factors 0.000001, 0.000006
[Mon May 20 12:36:17 2013] User source parameters:
  Position = (193.1, 778.0) = 6 40 55.10 9 33 18.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source aperture counts = 22.8 +/- 5.9
  Background aperture counts = 0.2
  Rate = 0.0003 +/- 8e-05

[Mon May 20 12:36:20 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 12:36:20 2013] Using photon index=1.80, rate=0.000306, arf fullrun_ccd3_acisf14368_pi14-548_pass1_cl_src30.arf
[Mon May 20 12:36:20 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 20 12:36:20 2013] Updating source flux to 3.7e-15
[Mon May 20 12:39:55 2013] Source 30 has fewer than 100.000000 counts, skipping spectral fitting