[Sun May 19 15:45:29 2013] Detection parameters:
  Position = (541.2, 203.0) = 6 40 58.64 9 36 13.1
  Extent = 0.5" x 0.5", rotation angle = 82 degrees
  Source counts = 31.4 +/- 5.8
  Background counts = 2.6
  Rate = 0.0004 +/- 8e-05

[Sun May 19 15:45:29 2013] Off-axis axis estimate = 1.50'
[Sun May 19 19:57:13 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun May 19 19:57:13 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Sun May 19 19:57:13 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.593
[Sun May 19 19:57:13 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 0.39"
[Sun May 19 21:39:01 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src42.ximg exists
[Sun May 19 21:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src42.csv
[Sun May 19 21:39:01 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src42_1.ximg exists
[Sun May 19 21:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src42.csv
[Sun May 19 21:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 21:39:01 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src42.ximg exists
[Sun May 19 21:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src42.csv
[Sun May 19 21:39:01 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src42_1.ximg exists
[Sun May 19 21:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src42.csv
[Sun May 19 21:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:16:23 2013] Spatial fit model total counts = 64.423200, observed total counts = 58.000000
[Mon May 20 01:16:23 2013] Offset between fit and detection position for source 77 = 1.161417 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 1.161417 pixels
  Position = (541.9, 203.9) = 6 40 58.64 9 36 13.3
  Extent = 0.4 (0.3-0.5)" x 0.3 (0.3-0.4)", rotation angle = 49 (201-0) degrees
  Source counts = 63.0 +/- 7.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Mon May 20 01:16:23 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:16:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:16:23 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:16:23 2013] Source does appear to be extended
[Mon May 20 01:16:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Mon May 20 05:05:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 05:05:31 2013] Initial guess for spatial extent in simple fitting = 0.36"
[Mon May 20 05:05:31 2013] source mask rpix=0.7, npix_max = 6, mask sum = 3, frac = 0.498
[Mon May 20 05:05:31 2013] Skipping simple spatial due to low active detector fraction
[Mon May 20 09:36:54 2013] Vigneting correction estimate = 1.000000
[Mon May 20 09:36:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 09:36:54 2013] Assessing source extent using major axis lower bound
[Mon May 20 09:36:54 2013] Source does appear to be extended
[Mon May 20 09:36:54 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Mon May 20 11:10:52 2013] Writing source region out to fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77_src.reg
[Mon May 20 11:10:52 2013] Extracting stamp from image fullrun_ccd2_acisf14368_pi14-548_cl_sm2.00.img.gz, (523, 185) - (561, 223)
[Mon May 20 11:10:52 2013] Writing fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77.gif
[Mon May 20 11:35:48 2013] Size of ../../acisf14368/products/events/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77_src.evt.gz[events] = 53 counts
[Mon May 20 11:35:48 2013] Mean chipx,y = (160.77, 889.53)
[Mon May 20 11:35:48 2013] Mean tdetx,y = (3950.53, 3925.23)
[Mon May 20 11:35:48 2013] chipx,y range = (144.00-179.00, 872.00-906.00)
[Mon May 20 11:35:48 2013] Size of ../../acisf14368/products/events/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77_bgd.evt.gz[events] = 8 counts
[Mon May 20 11:35:49 2013] Not generating rmf since there are only 62 counts
[Mon May 20 11:35:49 2013] arf not found, will run specextract
[Mon May 20 11:36:18 2013] ../../acisf14368/products/spectra/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77.warf not found
[Mon May 20 11:36:18 2013] ../../acisf14368/products/spectra/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77.wrmf not found
[Mon May 20 11:36:18 2013] Removal of ../../acisf14368/products/spectra/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77.soff failed
[Mon May 20 11:58:24 2013] Spectrum 77 has only 63 counts, deleting rmf
[Mon May 20 11:58:24 2013] 195.473
[Mon May 20 12:36:03 2013] Updating aperture counts using extracted products
[Mon May 20 12:36:03 2013] Total counts from fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77_src.pi.gz = 53.00
[Mon May 20 12:36:03 2013] Total counts from fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77_bgd.pi.gz = 8.00
[Mon May 20 12:36:03 2013] Got source and background scale factors 0.000000, 0.000006
[Mon May 20 12:36:03 2013] User source parameters:
  Position = (541.9, 203.9) = 6 40 58.64 9 36 13.3
  Extent = 0.4 (0.3-0.5)" x 0.3 (0.3-0.4)", rotation angle = 49 (201-0) degrees
  Source aperture counts = 52.5 +/- 8.3
  Background aperture counts = 0.5
  Rate = 0.0007 +/- 0.0001

[Mon May 20 12:36:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 12:36:10 2013] Using photon index=1.80, rate=0.000846, arf fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src77.arf
[Mon May 20 12:36:10 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 20 12:36:10 2013] Updating source flux to 1e-14
[Mon May 20 12:38:50 2013] Source 77 has fewer than 100.000000 counts, skipping spectral fitting