[Sun May 19 15:45:28 2013] Detection parameters:
  Position = (424.5, 81.5) = 6 41 2.52 9 35 13.3
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 64.0 +/- 8.2
  Background counts = 3.0
  Rate = 0.0009 +/- 0.0001

[Sun May 19 15:45:29 2013] Off-axis axis estimate = 1.01'
[Sun May 19 19:57:13 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun May 19 19:57:13 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Sun May 19 19:57:13 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.618
[Sun May 19 19:57:13 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 0.38"
[Sun May 19 21:39:00 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src29.ximg exists
[Sun May 19 21:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src29.csv
[Sun May 19 21:39:00 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src29_1.ximg exists
[Sun May 19 21:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src29.csv
[Sun May 19 21:39:00 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14368_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 21:39:01 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Sun May 19 21:39:01 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Sun May 19 21:39:01 2013] Fit fullrun_ccd2_acisf14368_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Mon May 20 01:16:23 2013] Spatial fit model total counts = 120.858000, observed total counts = 110.000000
[Mon May 20 01:16:23 2013] Offset between fit and detection position for source 28 = 0.366578 pixels
[Mon May 20 01:16:23 2013] 119.932000 total counts/ 11.884000 bgd. counts: snr = 31.342628
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.366578 pixels
  Position = (424.1, 81.6) = 6 41 2.55 9 35 13.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 108.0 +/- 11.0
  Background counts = 11.9
  Rate = 0.001 +/- 0.0001
[Mon May 20 01:16:23 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:16:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:16:23 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:16:23 2013] Source does appear to be extended
[Mon May 20 01:16:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 05:05:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 05:05:31 2013] Initial guess for spatial extent in simple fitting = 0.44"
[Mon May 20 05:05:31 2013] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.517
[Mon May 20 05:05:31 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 0.44"
[Mon May 20 06:32:47 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass1_src29.ximg exists
[Mon May 20 06:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14368_pi14-548_cl_pass1_src29.csv
[Mon May 20 06:32:47 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass1_src29_1.ximg exists
[Mon May 20 06:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14368_pi14-548_cl_pass1_src29.csv
[Mon May 20 06:32:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14368_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14368_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 06:32:48 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Mon May 20 06:32:48 2013] fullrun_ccd2_acisf14368_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Mon May 20 06:32:48 2013] Fit fullrun_ccd2_acisf14368_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Mon May 20 09:36:54 2013] Spatial fit model total counts = 121.680000, observed total counts = 110.000000
[Mon May 20 09:36:54 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 09:36:54 2013] Vigneting correction estimate = 1.000000
[Mon May 20 09:36:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 09:36:54 2013] Assessing source extent using major axis lower bound
[Mon May 20 09:36:54 2013] Source does appear to be extended
[Mon May 20 09:36:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 11:10:52 2013] Writing source region out to fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28_src.reg
[Mon May 20 11:10:52 2013] Extracting stamp from image fullrun_ccd2_acisf14368_pi14-548_cl_sm2.00.img.gz, (404, 62) - (444, 102)
[Mon May 20 11:10:52 2013] Writing fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28.gif
[Mon May 20 11:27:40 2013] Size of ../../acisf14368/products/events/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28_src.evt.gz[events] = 103 counts
[Mon May 20 11:27:40 2013] Mean chipx,y = (11.37, 947.82)
[Mon May 20 11:27:40 2013] Mean tdetx,y = (4008.82, 4074.63)
[Mon May 20 11:27:40 2013] chipx,y range = (2.00-21.00, 929.00-966.00)
[Mon May 20 11:27:40 2013] Size of ../../acisf14368/products/events/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 6 counts
[Mon May 20 11:27:41 2013] rmf not found, will run specextract
[Mon May 20 11:27:41 2013] arf not found, will run specextract
[Mon May 20 11:28:10 2013] ../../acisf14368/products/spectra/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28.warf not found
[Mon May 20 11:28:10 2013] ../../acisf14368/products/spectra/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28.wrmf not found
[Mon May 20 11:28:10 2013] Removal of ../../acisf14368/products/spectra/fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28.soff failed
[Mon May 20 11:58:24 2013] Keeping rmf generated by specextract
[Mon May 20 11:58:24 2013] 97.7957
[Mon May 20 12:36:01 2013] Updating aperture counts using extracted products
[Mon May 20 12:36:01 2013] Total counts from fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28_src.pi.gz = 103.00
[Mon May 20 12:36:01 2013] Total counts from fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28_bgd.pi.gz = 6.00
[Mon May 20 12:36:01 2013] Got source and background scale factors 0.000001, 0.000007
[Mon May 20 12:36:01 2013] User source parameters:
  Position = (424.1, 81.6) = 6 41 2.55 9 35 13.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source aperture counts = 102.5 +/- 11.2
  Background aperture counts = 0.5
  Rate = 0.001 +/- 0.0002

[Mon May 20 12:36:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 12:36:10 2013] Using photon index=1.80, rate=0.00145, arf fullrun_ccd2_acisf14368_pi14-548_pass1_cl_src28.arf
[Mon May 20 12:36:10 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 20 12:36:10 2013] Updating source flux to 3.6e-14
[Mon May 20 12:38:50 2013] Flag p found in src. 28 procflags, skipping spectral fitting