[Sun May 19 15:44:52 2013] Detection parameters:
  Position = (800.6, 1026.6) = 6 41 5.95 9 31 39.8
  Extent = 0.5" x 0.5", rotation angle = 2 degrees
  Source counts = 62.1 +/- 8.0
  Background counts = 1.9
  Rate = 0.0008 +/- 0.0001

[Sun May 19 15:44:53 2013] Off-axis axis estimate = 3.50'
[Sun May 19 17:13:19 2013] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:13:19 2013] Initial guess for spatial extent in simple fitting = 0.69"
[Sun May 19 17:13:19 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.098
[Sun May 19 17:13:19 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 0.69"
[Sun May 19 19:57:12 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src53.ximg exists
[Sun May 19 19:57:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src53.csv
[Sun May 19 19:57:12 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src53_1.ximg exists
[Sun May 19 19:57:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src53.csv
[Sun May 19 19:57:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 19:57:13 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass0_tfrozen_src53.ximg exists
[Sun May 19 19:57:13 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass0_tfrozen_src53_1.ximg exists
[Sun May 19 19:57:13 2013] Fit fullrun_ccd1_acisf14368_pi14-548_cl_pass0_tfrozen_src53 appears to have run properly
[Mon May 20 01:16:14 2013] Spatial fit model total counts = 80.855700, observed total counts = 73.000000
[Mon May 20 01:16:14 2013] Offset between fit and detection position for source 69 = 0.867628 pixels
[Mon May 20 01:16:14 2013] 81.524100 total counts/ 13.731000 bgd. counts: snr = 18.295084
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.867628 pixels
  Position = (801.1, 1027.4) = 6 41 5.95 9 31 39.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 67.8 +/- 9.0
  Background counts = 13.7
  Rate = 0.0009 +/- 0.0001
[Mon May 20 01:16:14 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:16:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:16:14 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:16:14 2013] Source does appear to be extended
[Mon May 20 01:16:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 02:29:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 02:29:41 2013] Initial guess for spatial extent in simple fitting = 0.62"
[Mon May 20 02:29:41 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.959
[Mon May 20 02:29:41 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 0.62"
[Mon May 20 05:05:30 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src52.ximg exists
[Mon May 20 05:05:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src52.csv
[Mon May 20 05:05:30 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src52_1.ximg exists
[Mon May 20 05:05:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src52.csv
[Mon May 20 05:05:30 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 05:05:31 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass1_tfrozen_src52.ximg exists
[Mon May 20 05:05:31 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass1_tfrozen_src52_1.ximg exists
[Mon May 20 05:05:31 2013] Fit fullrun_ccd1_acisf14368_pi14-548_cl_pass1_tfrozen_src52 appears to have run properly
[Mon May 20 09:36:44 2013] Spatial fit model total counts = 82.816600, observed total counts = 75.000000
[Mon May 20 09:36:44 2013] Offset between fit and detection position for source 69 = 0.012932 pixels
[Mon May 20 09:36:44 2013] 83.451400 total counts/ 16.322900 bgd. counts: snr = 16.615304
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.012932 pixels
  Position = (801.1, 1027.4) = 6 41 5.95 9 31 39.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 67.1 +/- 9.1
  Background counts = 16.3
  Rate = 0.0009 +/- 0.0001
[Mon May 20 09:36:44 2013] Vigneting correction estimate = 1.000000
[Mon May 20 09:36:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 09:36:44 2013] Assessing source extent using major axis lower bound
[Mon May 20 09:36:44 2013] Source does appear to be extended
[Mon May 20 09:36:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 10:07:29 2013] Writing source region out to fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69_src.reg
[Mon May 20 10:07:29 2013] Extracting stamp from image fullrun_ccd1_acisf14368_pi14-548_cl_sm2.00.img.gz, (773, 999) - (829, 1055)
[Mon May 20 10:07:29 2013] Writing fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69.gif
[Mon May 20 10:35:18 2013] Size of ../../acisf14368/products/events/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69_src.evt.gz[events] = 67 counts
[Mon May 20 10:35:18 2013] Mean chipx,y = (259.28, 777.22)
[Mon May 20 10:35:18 2013] Mean tdetx,y = (4354.78, 4366.28)
[Mon May 20 10:35:18 2013] chipx,y range = (241.00-277.00, 760.00-796.00)
[Mon May 20 10:35:18 2013] Size of ../../acisf14368/products/events/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69_bgd.evt.gz[events] = 13 counts
[Mon May 20 10:35:19 2013] Not generating rmf since there are only 67 counts
[Mon May 20 10:35:19 2013] arf not found, will run specextract
[Mon May 20 10:35:44 2013] ../../acisf14368/products/spectra/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69.warf not found
[Mon May 20 10:35:44 2013] ../../acisf14368/products/spectra/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69.wrmf not found
[Mon May 20 10:35:44 2013] Removal of ../../acisf14368/products/spectra/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69.soff failed
[Mon May 20 11:10:50 2013] Spectrum 69 has only 67 counts, deleting rmf
[Mon May 20 11:10:50 2013] 190.408
[Mon May 20 12:35:45 2013] Updating aperture counts using extracted products
[Mon May 20 12:35:45 2013] Total counts from fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69_src.pi.gz = 67.00
[Mon May 20 12:35:45 2013] Total counts from fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69_bgd.pi.gz = 13.00
[Mon May 20 12:35:46 2013] Got source and background scale factors 0.000001, 0.000012
[Mon May 20 12:35:46 2013] User source parameters:
  Position = (801.1, 1027.4) = 6 41 5.95 9 31 39.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 65.8 +/- 9.2
  Background aperture counts = 1.2
  Rate = 0.0009 +/- 0.0001

[Mon May 20 12:35:56 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 12:35:56 2013] Using photon index=1.80, rate=0.000902, arf fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src69.arf
[Mon May 20 12:35:56 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 20 12:35:56 2013] Updating source flux to 1.1e-14
[Mon May 20 12:37:12 2013] Source 69 has fewer than 100.000000 counts, skipping spectral fitting