[Sun May 19 15:44:53 2013] Detection parameters:
  Position = (721.1, 770.3) = 6 41 8.59 9 29 33.7
  Extent = 1.4" x 0.7", rotation angle = 41 degrees
  Source counts = 27.6 +/- 5.8
  Background counts = 6.4
  Rate = 0.0004 +/- 8e-05

[Sun May 19 15:44:53 2013] Off-axis axis estimate = 5.67'
[Sun May 19 17:13:19 2013] Using EEF radius (= 1.47 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:13:19 2013] Initial guess for spatial extent in simple fitting = 1.47"
[Sun May 19 17:13:19 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004
[Sun May 19 17:13:19 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 1.47"
[Sun May 19 19:57:12 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src79.ximg exists
[Sun May 19 19:57:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src79.csv
[Sun May 19 19:57:12 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src79_1.ximg exists
[Sun May 19 19:57:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src79.csv
[Sun May 19 19:57:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14368_pi14-548_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 19:57:13 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass0_tfrozen_src79.ximg exists
[Sun May 19 19:57:13 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass0_tfrozen_src79_1.ximg exists
[Sun May 19 19:57:13 2013] Fit fullrun_ccd1_acisf14368_pi14-548_cl_pass0_tfrozen_src79 appears to have run properly
[Mon May 20 01:16:14 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 100 at 15.663872 pixels away
[Mon May 20 01:16:14 2013] Spatial fit model total counts = 33.544900, observed total counts = 37.000000
[Mon May 20 01:16:14 2013] Offset between fit and detection position for source 100 = 2.002659 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 2.002659 pixels
  Position = (722.8, 771.3) = 6 41 8.55 9 29 33.9
  Extent = 1.5 (1.1-2.3)" x 0.8 (0.6-1.1)", rotation angle = 308 (287-325) degrees
  Source counts = 32.0 +/- 5.7
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Mon May 20 01:16:14 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:16:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:16:14 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:16:14 2013] Source does appear to be extended
[Mon May 20 01:16:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Mon May 20 02:29:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 02:29:41 2013] Initial guess for spatial extent in simple fitting = 1.19"
[Mon May 20 02:29:41 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.063
[Mon May 20 02:29:41 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 1.19"
[Mon May 20 05:05:30 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src78.ximg exists
[Mon May 20 05:05:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src78.csv
[Mon May 20 05:05:30 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src78_1.ximg exists
[Mon May 20 05:05:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src78.csv
[Mon May 20 05:05:30 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14368_pi14-548_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 05:05:31 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass1_tfrozen_src78.ximg exists
[Mon May 20 05:05:31 2013] fullrun_ccd1_acisf14368_pi14-548_cl_pass1_tfrozen_src78_1.ximg exists
[Mon May 20 05:05:31 2013] Fit fullrun_ccd1_acisf14368_pi14-548_cl_pass1_tfrozen_src78 appears to have run properly
[Mon May 20 09:36:44 2013] Spatial fit model total counts = 36.517300, observed total counts = 36.000000
[Mon May 20 09:36:44 2013] Offset between fit and detection position for source 100 = 0.244416 pixels
[Mon May 20 09:36:44 2013] 36.029600 total counts/ 13.946500 bgd. counts: snr = 5.913266
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 0.244416 pixels
  Position = (722.9, 771.5) = 6 41 8.55 9 29 34.0
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 22.1 +/- 6.0
  Background counts = 13.9
  Rate = 0.0003 +/- 8e-05
[Mon May 20 09:36:44 2013] Vigneting correction estimate = 1.000000
[Mon May 20 09:36:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 09:36:44 2013] Assessing source extent using major axis lower bound
[Mon May 20 09:36:44 2013] Source does appear to be extended
[Mon May 20 09:36:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 10:07:29 2013] Writing source region out to fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100_src.reg
[Mon May 20 10:07:29 2013] Extracting stamp from image fullrun_ccd1_acisf14368_pi14-548_cl_sm2.00.img.gz, (681, 730) - (765, 813)
[Mon May 20 10:07:29 2013] Writing fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100.gif
[Mon May 20 10:49:13 2013] Size of ../../acisf14368/products/events/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100_src.evt.gz[events] = 31 counts
[Mon May 20 10:49:13 2013] Mean chipx,y = (439.94, 582.68)
[Mon May 20 10:49:13 2013] Mean tdetx,y = (4549.32, 4546.94)
[Mon May 20 10:49:13 2013] chipx,y range = (427.00-464.00, 559.00-600.00)
[Mon May 20 10:49:13 2013] Size of ../../acisf14368/products/events/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100_bgd.evt.gz[events] = 45 counts
[Mon May 20 10:49:15 2013] Not generating rmf since there are only 22 counts
[Mon May 20 10:49:15 2013] arf not found, will run specextract
[Mon May 20 10:49:39 2013] ../../acisf14368/products/spectra/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100.warf not found
[Mon May 20 10:49:39 2013] ../../acisf14368/products/spectra/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100.wrmf not found
[Mon May 20 10:49:39 2013] Removal of ../../acisf14368/products/spectra/fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100.soff failed
[Mon May 20 11:10:50 2013] Spectrum 100 has only 22 counts, deleting rmf
[Mon May 20 11:10:50 2013] 180.513
[Mon May 20 12:35:49 2013] Updating aperture counts using extracted products
[Mon May 20 12:35:49 2013] Total counts from fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100_src.pi.gz = 31.00
[Mon May 20 12:35:50 2013] Total counts from fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100_bgd.pi.gz = 45.00
[Mon May 20 12:35:50 2013] Got source and background scale factors 0.000003, 0.000026
[Mon May 20 12:35:50 2013] User source parameters:
  Position = (722.9, 771.5) = 6 41 8.55 9 29 34.0
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source aperture counts = 26.5 +/- 6.6
  Background aperture counts = 4.5
  Rate = 0.0004 +/- 9e-05

[Mon May 20 12:35:56 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 12:35:56 2013] Using photon index=1.80, rate=0.000297, arf fullrun_ccd1_acisf14368_pi14-548_pass1_cl_src100.arf
[Mon May 20 12:35:56 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 20 12:35:56 2013] Updating source flux to 4e-15
[Mon May 20 12:37:12 2013] Source 100 has fewer than 100.000000 counts, skipping spectral fitting