[Sun May 19 15:44:16 2013] Detection parameters:
  Position = (1113.4, 429.7) = 6 41 10.41 9 34 19.2
  Extent = 0.5" x 0.5", rotation angle = 23 degrees
  Source counts = 22.0 +/- 4.8
  Background counts = 1.0
  Rate = 0.0003 +/- 6e-05

[Sun May 19 15:44:17 2013] Off-axis axis estimate = 2.85'
[Sun May 19 15:51:09 2013] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Sun May 19 15:51:09 2013] Initial guess for spatial extent in simple fitting = 0.55"
[Sun May 19 15:51:09 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.859
[Sun May 19 15:51:09 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 0.55"
[Sun May 19 17:13:19 2013] fullrun_ccd0_acisf14368_pi14-548_cl_pass0_src17.ximg exists
[Sun May 19 17:13:19 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf14368_pi14-548_cl_pass0_src17.csv
[Sun May 19 17:13:19 2013] fullrun_ccd0_acisf14368_pi14-548_cl_pass0_src17_1.ximg exists
[Sun May 19 17:13:19 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf14368_pi14-548_cl_pass0_src17.csv
[Sun May 19 17:13:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14368_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14368_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 17:13:19 2013] fullrun_ccd0_acisf14368_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sun May 19 17:13:19 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf14368_pi14-548_cl_pass0_tfrozen_src17.csv
[Sun May 19 17:13:19 2013] fullrun_ccd0_acisf14368_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sun May 19 17:13:19 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf14368_pi14-548_cl_pass0_tfrozen_src17.csv
[Sun May 19 17:13:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14368_pi14-548_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14368_pi14-548_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:16:01 2013] Spatial fit model total counts = -8.923210, observed total counts = 92.000000
[Mon May 20 01:16:01 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 01:16:01 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:16:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:16:01 2013] Assessing source extent using major
[Mon May 20 01:16:01 2013] Source does appear to be extended
[Mon May 20 01:16:01 2013] Computing asymmetry using major and minor axis, asym = 1.11
[Mon May 20 01:17:10 2013] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Mon May 20 01:17:10 2013] Initial guess for spatial extent in simple fitting = 0.55"
[Mon May 20 01:17:10 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.859
[Mon May 20 01:17:10 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 0.55"
[Mon May 20 02:29:40 2013] fullrun_ccd0_acisf14368_pi14-548_cl_pass1_src17.ximg exists
[Mon May 20 02:29:40 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf14368_pi14-548_cl_pass1_src17.csv
[Mon May 20 02:29:40 2013] fullrun_ccd0_acisf14368_pi14-548_cl_pass1_src17_1.ximg exists
[Mon May 20 02:29:40 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf14368_pi14-548_cl_pass1_src17.csv
[Mon May 20 02:29:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14368_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14368_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 02:29:40 2013] fullrun_ccd0_acisf14368_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Mon May 20 02:29:40 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf14368_pi14-548_cl_pass1_tfrozen_src17.csv
[Mon May 20 02:29:40 2013] fullrun_ccd0_acisf14368_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Mon May 20 02:29:40 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf14368_pi14-548_cl_pass1_tfrozen_src17.csv
[Mon May 20 02:29:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14368_pi14-548_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14368_pi14-548_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 09:36:30 2013] Spatial fit model total counts = -9.367100, observed total counts = 92.000000
[Mon May 20 09:36:30 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 09:36:30 2013] Vigneting correction estimate = 1.000000
[Mon May 20 09:36:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 09:36:30 2013] Assessing source extent using major
[Mon May 20 09:36:30 2013] Source does appear to be extended
[Mon May 20 09:36:30 2013] Computing asymmetry using major and minor axis, asym = 1.11
[Mon May 20 09:37:45 2013] Writing source region out to fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18_src.reg
[Mon May 20 09:37:45 2013] Extracting stamp from image fullrun_ccd0_acisf14368_pi14-548_cl_sm2.00.img.gz, (1088, 405) - (1138, 455)
[Mon May 20 09:37:45 2013] Writing fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18.gif
[Mon May 20 09:47:45 2013] Size of ../../acisf14368/products/events/fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18_src.evt.gz[events] = 25 counts
[Mon May 20 09:47:45 2013] Mean chipx,y = (789.28, 942.48)
[Mon May 20 09:47:45 2013] Mean tdetx,y = (4003.48, 4342.72)
[Mon May 20 09:47:45 2013] chipx,y range = (771.00-805.00, 924.00-961.00)
[Mon May 20 09:47:45 2013] Size of ../../acisf14368/products/events/fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 16 counts
[Mon May 20 09:47:46 2013] Not generating rmf since there are only 21 counts
[Mon May 20 09:47:46 2013] arf not found, will run specextract
[Mon May 20 09:48:14 2013] ../../acisf14368/products/spectra/fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18.warf not found
[Mon May 20 09:48:14 2013] ../../acisf14368/products/spectra/fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18.wrmf not found
[Mon May 20 09:48:14 2013] Removal of ../../acisf14368/products/spectra/fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18.soff failed
[Mon May 20 10:07:27 2013] Spectrum 18 has only 22 counts, deleting rmf
[Mon May 20 10:07:27 2013] 196.306
[Mon May 20 12:35:31 2013] Updating aperture counts using extracted products
[Mon May 20 12:35:31 2013] Total counts from fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18_src.pi.gz = 25.00
[Mon May 20 12:35:31 2013] Total counts from fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18_bgd.pi.gz = 16.00
[Mon May 20 12:35:31 2013] Got source and background scale factors 0.000001, 0.000010
[Mon May 20 12:35:31 2013] User source parameters:
  Position = (1113.4, 429.7) = 6 41 10.41 9 34 19.2
  Extent = 0.5" x 0.5", rotation angle = 23
  Source aperture counts = 23.7 +/- 6.1
  Background aperture counts = 1.3
  Rate = 0.0003 +/- 8e-05

[Mon May 20 12:35:31 2013] Updating counts from extracted products
[Mon May 20 12:35:31 2013] Set source signif. to 23.70/1.14 = 20.80
[Mon May 20 12:35:37 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 12:35:37 2013] Using photon index=1.80, rate=0.000318, arf fullrun_ccd0_acisf14368_pi14-548_pass1_cl_src18.arf
[Mon May 20 12:35:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 20 12:35:37 2013] Updating source flux to 3.9e-15
[Mon May 20 12:36:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting