[Thu May 23 16:02:08 2013] Detection parameters:
  Position = (134.1, 702.3) = 5 52 14.79 32 38 5.9
  Extent = 0.9" x 0.5", rotation angle = 108 degrees
  Source counts = 11.8 +/- 3.6
  Background counts = 1.2
  Rate = 0.0002 +/- 6e-05

[Thu May 23 16:02:08 2013] Off-axis axis estimate = 4.15'
[Thu May 23 17:05:52 2013] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Thu May 23 17:05:52 2013] Initial guess for spatial extent in simple fitting = 0.88"
[Thu May 23 17:05:52 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.960
[Thu May 23 17:05:52 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 0.88"
[Thu May 23 17:34:13 2013] fullrun_ccd2_acisf14366_pi14-548_cl_pass0_src20.ximg exists
[Thu May 23 17:34:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14366_pi14-548_cl_pass0_src20.csv
[Thu May 23 17:34:13 2013] fullrun_ccd2_acisf14366_pi14-548_cl_pass0_src20_1.ximg exists
[Thu May 23 17:34:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14366_pi14-548_cl_pass0_src20.csv
[Thu May 23 17:34:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14366_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14366_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 17:34:13 2013] fullrun_ccd2_acisf14366_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Thu May 23 17:34:13 2013] fullrun_ccd2_acisf14366_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Thu May 23 17:34:13 2013] Fit fullrun_ccd2_acisf14366_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Thu May 23 18:24:43 2013] Spatial fit model total counts = 14.363600, observed total counts = 14.000000
[Thu May 23 18:24:43 2013] Offset between fit and detection position for source 27 = 0.417717 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.417717 pixels
  Position = (134.4, 702.6) = 5 52 14.80 32 38 5.8
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 14.4 +/- 3.8
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Thu May 23 18:24:43 2013] Vigneting correction estimate = 1.000000
[Thu May 23 18:24:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 18:24:43 2013] Assessing source extent using major axis lower bound
[Thu May 23 18:24:43 2013] Source does appear to be extended
[Thu May 23 18:24:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 19:18:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 19:18:08 2013] Initial guess for spatial extent in simple fitting = 0.98"
[Thu May 23 19:18:08 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.012
[Thu May 23 19:18:08 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 0.98"
[Thu May 23 19:47:55 2013] fullrun_ccd2_acisf14366_pi14-548_cl_pass1_src20.ximg exists
[Thu May 23 19:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14366_pi14-548_cl_pass1_src20.csv
[Thu May 23 19:47:55 2013] fullrun_ccd2_acisf14366_pi14-548_cl_pass1_src20_1.ximg exists
[Thu May 23 19:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14366_pi14-548_cl_pass1_src20.csv
[Thu May 23 19:47:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14366_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14366_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 19:47:55 2013] fullrun_ccd2_acisf14366_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Thu May 23 19:47:55 2013] fullrun_ccd2_acisf14366_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May 23 19:47:55 2013] Fit fullrun_ccd2_acisf14366_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Thu May 23 20:39:57 2013] Spatial fit model total counts = 15.101500, observed total counts = 14.000000
[Thu May 23 20:39:57 2013] Offset between fit and detection position for source 27 = 0.306814 pixels
[Thu May 23 20:39:57 2013] 15.099914 total counts/ 0.018614 bgd. counts: snr = 110.540457
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.306814 pixels
  Position = (134.4, 702.9) = 5 52 14.80 32 38 5.9
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 15.1 +/- 3.9
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Thu May 23 20:39:57 2013] Vigneting correction estimate = 1.000000
[Thu May 23 20:39:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 20:39:57 2013] Assessing source extent using major axis lower bound
[Thu May 23 20:39:57 2013] Source does appear to be extended
[Thu May 23 20:39:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 21:11:52 2013] Writing source region out to fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27_src.reg
[Thu May 23 21:11:52 2013] Extracting stamp from image fullrun_ccd2_acisf14366_pi14-548_cl_sm2.00.img.gz, (92, 661) - (176, 745)
[Thu May 23 21:11:52 2013] Writing fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27.gif
[Thu May 23 21:23:12 2013] Size of ../../acisf14366/products/events/fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27_src.evt.gz[events] = 14 counts
[Thu May 23 21:23:12 2013] Mean chipx,y = (19.57, 546.71)
[Thu May 23 21:23:12 2013] Mean tdetx,y = (3607.71, 4066.43)
[Thu May 23 21:23:12 2013] chipx,y range = (4.00-34.00, 532.00-571.00)
[Thu May 23 21:23:12 2013] Size of ../../acisf14366/products/events/fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 21 counts
[Thu May 23 21:23:13 2013] Not generating rmf since there are only 15 counts
[Thu May 23 21:23:13 2013] arf not found, will run specextract
[Thu May 23 21:23:39 2013] ../../acisf14366/products/spectra/fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27.warf not found
[Thu May 23 21:23:39 2013] ../../acisf14366/products/spectra/fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27.wrmf not found
[Thu May 23 21:23:39 2013] Removal of ../../acisf14366/products/spectra/fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27.soff failed
[Thu May 23 21:28:30 2013] Spectrum 27 has only 15 counts, deleting rmf
[Thu May 23 21:28:30 2013] 163.476
[Thu May 23 21:58:31 2013] Updating aperture counts using extracted products
[Thu May 23 21:58:31 2013] Total counts from fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27_src.pi.gz = 14.00
[Thu May 23 21:58:31 2013] Total counts from fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27_bgd.pi.gz = 21.00
[Thu May 23 21:58:31 2013] Got source and background scale factors 0.000003, 0.000031
[Thu May 23 21:58:31 2013] User source parameters:
  Position = (134.4, 702.9) = 5 52 14.80 32 38 5.9
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source aperture counts = 12.2 +/- 4.8
  Background aperture counts = 1.8
  Rate = 0.0002 +/- 7e-05

[Thu May 23 21:58:33 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 21:58:33 2013] Using photon index=1.80, rate=0.000232, arf fullrun_ccd2_acisf14366_pi14-548_pass1_cl_src27.arf
[Thu May 23 21:58:33 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 23 21:58:33 2013] Updating source flux to 3.4e-15
[Thu May 23 21:58:52 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting