[Mon May 13 13:25:07 2013] Detection parameters:
  Position = (1125.5, 511.3) = 23 28 4.57 -1 58 3.5
  Extent = 1.9" x 1.6", rotation angle = 38 degrees
  Source counts = 48.4 +/- 11.0
  Background counts = 73.6
  Rate = 0.0007 +/- 0.0002

[Mon May 13 13:25:07 2013] Off-axis axis estimate = 11.22'
[Mon May 13 15:44:37 2013] Using EEF radius (= 5.61 ")to estimate initial spatial extent for simple fitting
[Mon May 13 15:44:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 15:44:37 2013] Initial guess for spatial extent in simple fitting = 5.61"
[Mon May 13 15:44:37 2013] source mask rpix=11.4, npix_max = 566, mask sum = 552, frac = 0.975
[Mon May 13 15:44:37 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 5.61"
[Mon May 13 15:53:30 2013] fullrun_ccd7_acisf14361_pi14-548_cl_pass0_src1.ximg exists
[Mon May 13 15:53:30 2013] fullrun_ccd7_acisf14361_pi14-548_cl_pass0_src1_1.ximg exists
[Mon May 13 15:53:30 2013] Fit fullrun_ccd7_acisf14361_pi14-548_cl_pass0_src1 appears to have run properly
[Mon May 13 15:53:30 2013] fullrun_ccd7_acisf14361_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 15:53:30 2013] fullrun_ccd7_acisf14361_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 15:53:30 2013] Fit fullrun_ccd7_acisf14361_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 13 15:53:46 2013] Spatial fit model total counts = 451.220000, observed total counts = 445.000000
[Mon May 13 15:53:46 2013] Offset between fit and detection position for source 1 = 7.122506 pixels
[Mon May 13 15:53:46 2013] 449.651000 total counts/ 311.015000 bgd. counts: snr = 7.861137
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.122506 pixels
  Position = (1132.1, 514.0) = 23 28 4.37 -1 58 2.4
  Extent = 10.2 (8.1-11.2)" x 4.7 (3.3-6.9)", rotation angle = 318 (303-334) degrees
  Source counts = 138.6 +/- 21.2
  Background counts = 311.0
  Rate = 0.002 +/- 0.0003
[Mon May 13 15:53:46 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:53:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:53:46 2013] Assessing source extent using major axis lower bound
[Mon May 13 15:53:46 2013] Source does appear to be extended
[Mon May 13 15:53:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Mon May 13 17:53:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 17:53:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 17:53:58 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Mon May 13 17:53:58 2013] source mask rpix=15.1, npix_max = 972, mask sum = 992, frac = 1.020
[Mon May 13 17:53:58 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.42"
[Mon May 13 18:04:36 2013] fullrun_ccd7_acisf14361_pi14-548_cl_pass1_src1.ximg exists
[Mon May 13 18:04:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14361_pi14-548_cl_pass1_src1.csv
[Mon May 13 18:04:36 2013] fullrun_ccd7_acisf14361_pi14-548_cl_pass1_src1_1.ximg exists
[Mon May 13 18:04:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14361_pi14-548_cl_pass1_src1.csv
[Mon May 13 18:04:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14361_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14361_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 18:04:36 2013] fullrun_ccd7_acisf14361_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 18:04:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14361_pi14-548_cl_pass1_tfrozen_src1.csv
[Mon May 13 18:04:36 2013] fullrun_ccd7_acisf14361_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 18:04:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14361_pi14-548_cl_pass1_tfrozen_src1.csv
[Mon May 13 18:04:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14361_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14361_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 18:04:51 2013] Warning, spatial fit 1 centroid is now closest to src. 21
[Mon May 13 18:04:51 2013] Source 1 in spatial fitting is no longer close to this source
[Mon May 13 18:04:51 2013] Vigneting correction estimate = 1.000000
[Mon May 13 18:04:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 18:04:51 2013] Assessing source extent using major axis lower bound
[Mon May 13 18:04:51 2013] Source does appear to be extended
[Mon May 13 18:04:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Mon May 13 18:54:03 2013] Writing source region out to fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1_src.reg
[Mon May 13 18:54:03 2013] Extracting stamp from image fullrun_ccd7_acisf14361_pi14-548_cl_sm2.00.img.gz, (666, 48) - (1351, 980)
[Mon May 13 18:54:03 2013] Writing fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1.gif
[Mon May 13 18:54:06 2013] Size of ../../acisf14361/products/events/fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1_src.evt.gz[events] = 430 counts
[Mon May 13 18:54:06 2013] Mean chipx,y = (546.17, 975.48)
[Mon May 13 18:54:06 2013] Mean tdetx,y = (4463.17, 2677.48)
[Mon May 13 18:54:06 2013] chipx,y range = (481.00-601.00, 901.00-1022.00)
[Mon May 13 18:54:06 2013] Size of ../../acisf14361/products/events/fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 7469 counts
[Mon May 13 18:54:07 2013] rmf not found, will run specextract
[Mon May 13 18:54:07 2013] arf not found, will run specextract
[Mon May 13 18:54:15 2013] ../../acisf14361/products/spectra/fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1.warf not found
[Mon May 13 18:54:15 2013] ../../acisf14361/products/spectra/fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1.wrmf not found
[Mon May 13 18:54:15 2013] Removal of ../../acisf14361/products/spectra/fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1.soff failed
[Mon May 13 18:54:22 2013] Keeping rmf generated by specextract
[Mon May 13 18:54:22 2013] 157.425
[Mon May 13 18:54:38 2013] Updating aperture counts using extracted products
[Mon May 13 18:54:38 2013] Total counts from fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1_src.pi.gz = 430.00
[Mon May 13 18:54:38 2013] Total counts from fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1_bgd.pi.gz = 7469.00
[Mon May 13 18:54:38 2013] Got source and background scale factors 0.000147, 0.003789
[Mon May 13 18:54:38 2013] User source parameters:
  Position = (1132.1, 514.0) = 23 28 4.37 -1 58 2.4
  Extent = 10.2 (8.1-11.2)" x 4.7 (3.3-6.9)", rotation angle = 318 (303-334) degrees
  Source aperture counts = 140.1 +/- 21.8
  Background aperture counts = 289.9
  Rate = 0.002 +/- 0.0003

[Mon May 13 18:54:38 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 18:54:38 2013] Using photon index=1.80, rate=0.00195, arf fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1.arf
[Mon May 13 18:54:38 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 18:54:38 2013] Updating source flux to 2.3e-14
[Mon May 13 18:55:21 2013] Reading fit data from acisf14361/analysis//spectral/fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1_pl.csv
[Mon May 13 18:55:21 2013] Spectral fit parameter nH value = 5.72421e+21
[Mon May 13 18:55:21 2013] Spectral fit parameter PhoIndex value = 2.27016
[Mon May 13 18:55:21 2013] Failed to get F(0.3-8.0) from acisf14361/analysis//spectral/fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 13 18:55:21 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 18:55:21 2013] Using Nh = 5.7e+21, photon index=2.27, rate=0.00195, arf fullrun_ccd7_acisf14361_pi14-548_pass1_cl_src1.arf
[Mon May 13 18:55:21 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 18:55:21 2013] Updating source flux to 2.2e-14