[Tue Oct 25 23:58:57 2011] Detection parameters:
  Position = (655.3, 849.5) = 1 2 13.79 -22 2 22.8
  Extent = 1.9" x 1.2", rotation angle = 150 degrees
  Source counts = 1657.9 +/- 41.8
  Background counts = 89.1
  Rate = 0.04 +/- 0.001

[Tue Oct 25 23:58:57 2011] Off-axis axis estimate = 7.88'
[Wed Oct 26 01:02:00 2011] Using EEF radius (= 2.75 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 01:02:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 01:02:00 2011] Initial guess for spatial extent in simple fitting = 2.75"
[Wed Oct 26 01:02:00 2011] source mask rpix=5.6, npix_max = 148, mask sum = 156, frac = 1.052
[Wed Oct 26 01:02:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.75"
[Wed Oct 26 01:22:28 2011] fullrun_ccd3_acisf14354_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 01:22:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14354_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 01:22:28 2011] fullrun_ccd3_acisf14354_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 01:22:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14354_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 01:22:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14354_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14354_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 01:22:28 2011] fullrun_ccd3_acisf14354_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 01:22:28 2011] fullrun_ccd3_acisf14354_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 01:22:28 2011] Fit fullrun_ccd3_acisf14354_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 01:43:58 2011] Spatial fit model total counts = 1750.160000, observed total counts = 1755.000000
[Wed Oct 26 01:43:58 2011] Offset between fit and detection position for source 1 = 0.605760 pixels
[Wed Oct 26 01:43:58 2011] 1750.422000 total counts/ 157.062000 bgd. counts: snr = 127.138870
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.605760 pixels
  Position = (655.6, 850.0) = 1 2 13.79 -22 2 22.8
  Extent = 2.3 (2.2-2.4)", rotation angle = 0
  Source counts = 1593.4 +/- 41.8
  Background counts = 157.1
  Rate = 0.04 +/- 0.001
[Wed Oct 26 01:43:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 01:43:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 01:43:58 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 01:43:58 2011] Source does appear to be extended
[Wed Oct 26 01:43:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 02:36:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 02:36:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 02:36:27 2011] Initial guess for spatial extent in simple fitting = 2.27"
[Wed Oct 26 02:36:27 2011] source mask rpix=4.6, npix_max = 104, mask sum = 110, frac = 1.049
[Wed Oct 26 02:36:27 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.27"
[Wed Oct 26 02:58:54 2011] fullrun_ccd3_acisf14354_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 02:58:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14354_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 02:58:54 2011] fullrun_ccd3_acisf14354_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 02:58:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14354_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 02:58:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14354_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14354_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 02:58:54 2011] fullrun_ccd3_acisf14354_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 02:58:54 2011] fullrun_ccd3_acisf14354_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 02:58:54 2011] Fit fullrun_ccd3_acisf14354_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 03:28:56 2011] Spatial fit model total counts = 1736.010000, observed total counts = 1732.000000
[Wed Oct 26 03:28:56 2011] Offset between fit and detection position for source 1 = 0.145660 pixels
[Wed Oct 26 03:28:56 2011] 1732.745000 total counts/ 232.995000 bgd. counts: snr = 98.252943
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.145660 pixels
  Position = (655.7, 850.0) = 1 2 13.79 -22 2 22.8
  Extent = 2.1 (2.0-2.2)", rotation angle = 0
  Source counts = 1499.8 +/- 41.6
  Background counts = 233.0
  Rate = 0.04 +/- 0.001
[Wed Oct 26 03:28:56 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 03:28:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 03:28:56 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 03:28:56 2011] Source does appear to be extended
[Wed Oct 26 03:28:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 03:56:11 2011] Writing source region out to fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 03:56:11 2011] Extracting stamp from image fullrun_ccd3_acisf14354_pi14-548_cl_sm2.00.img.gz, (561, 755) - (751, 945)
[Wed Oct 26 03:56:11 2011] Writing fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 03:56:13 2011] Size of ../../acisf14354/products/events/fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1694 counts
[Wed Oct 26 03:56:13 2011] Mean chipx,y = (220.79, 392.84)
[Wed Oct 26 03:56:13 2011] Mean tdetx,y = (4739.16, 3281.79)
[Wed Oct 26 03:56:13 2011] chipx,y range = (192.00-250.00, 360.00-425.00)
[Wed Oct 26 03:56:13 2011] Size of ../../acisf14354/products/events/fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 110 counts
[Wed Oct 26 03:56:14 2011] rmf not found, will run specextract
[Wed Oct 26 03:56:14 2011] arf not found, will run specextract
[Wed Oct 26 03:56:36 2011] ../../acisf14354/products/spectra/fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1.warf not found
[Wed Oct 26 03:56:36 2011] ../../acisf14354/products/spectra/fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1.wrmf not found
[Wed Oct 26 03:56:36 2011] Removal of ../../acisf14354/products/spectra/fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1.soff failed
[Wed Oct 26 04:04:23 2011] Keeping rmf generated by specextract
[Wed Oct 26 04:04:23 2011] 167.569
[Wed Oct 26 04:05:08 2011] Updating aperture counts using extracted products
[Wed Oct 26 04:05:08 2011] Error reading totcts from fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 04:05:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 04:05:09 2011] Using photon index=1.80, rate=0.0388, arf fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 04:05:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 04:05:09 2011] Updating source flux to 5.6e-13
[Wed Oct 26 04:05:34 2011] Reading fit data from acisf14354/analysis//spectral/fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 04:05:34 2011] Spectral fit parameter nH value = 1.06738e+13
[Wed Oct 26 04:05:34 2011] Spectral fit parameter PhoIndex value = 1.88141
[Wed Oct 26 04:05:34 2011] Failed to get F(0.3-8.0) from acisf14354/analysis//spectral/fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 04:05:34 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 04:05:34 2011] Using Nh = 1.1e+13, photon index=1.88, rate=0.0388, arf fullrun_ccd3_acisf14354_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 04:05:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 04:05:34 2011] Updating source flux to 5.8e-13