[Tue Oct 25 23:58:09 2011] Detection parameters:
  Position = (796.4, 892.1) = 1 2 5.97 -22 10 34.4
  Extent = 0.8" x 0.7", rotation angle = 128 degrees
  Source counts = 206.3 +/- 14.6
  Background counts = 6.7
  Rate = 0.005 +/- 0.0004

[Tue Oct 25 23:58:09 2011] Off-axis axis estimate = 6.72'
[Wed Oct 26 00:31:56 2011] Using EEF radius (= 2.02 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 00:31:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 00:31:56 2011] Initial guess for spatial extent in simple fitting = 2.02"
[Wed Oct 26 00:31:56 2011] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.958
[Wed Oct 26 00:31:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.02"
[Wed Oct 26 00:45:12 2011] fullrun_ccd1_acisf14354_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 00:45:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14354_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 00:45:12 2011] fullrun_ccd1_acisf14354_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 00:45:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14354_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 00:45:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14354_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14354_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 00:45:12 2011] fullrun_ccd1_acisf14354_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 00:45:12 2011] fullrun_ccd1_acisf14354_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 00:45:12 2011] Fit fullrun_ccd1_acisf14354_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 01:43:55 2011] Spatial fit model total counts = 253.766000, observed total counts = 254.000000
[Wed Oct 26 01:43:55 2011] Offset between fit and detection position for source 3 = 0.543191 pixels
[Wed Oct 26 01:43:55 2011] 254.170700 total counts/ 15.988700 bgd. counts: snr = 59.566538
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.543191 pixels
  Position = (796.8, 892.4) = 1 2 5.97 -22 10 34.5
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 238.2 +/- 15.9
  Background counts = 16.0
  Rate = 0.006 +/- 0.0004
[Wed Oct 26 01:43:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 01:43:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 01:43:55 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 01:43:55 2011] Source does appear to be extended
[Wed Oct 26 01:43:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 02:08:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 02:08:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 02:08:24 2011] Initial guess for spatial extent in simple fitting = 1.58"
[Wed Oct 26 02:08:24 2011] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.015
[Wed Oct 26 02:08:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.58"
[Wed Oct 26 02:20:16 2011] fullrun_ccd1_acisf14354_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 02:20:16 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf14354_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 02:20:16 2011] fullrun_ccd1_acisf14354_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 02:20:16 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf14354_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 02:20:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14354_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14354_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 02:20:16 2011] fullrun_ccd1_acisf14354_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 02:20:16 2011] fullrun_ccd1_acisf14354_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 02:20:16 2011] Fit fullrun_ccd1_acisf14354_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 03:28:53 2011] Spatial fit model total counts = 251.776000, observed total counts = 252.000000
[Wed Oct 26 03:28:53 2011] Offset between fit and detection position for source 3 = 0.030336 pixels
[Wed Oct 26 03:28:53 2011] 252.386500 total counts/ 22.881500 bgd. counts: snr = 47.978858
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.030336 pixels
  Position = (796.8, 892.4) = 1 2 5.97 -22 10 34.5
  Extent = 1.5 (1.4-1.7)", rotation angle = 0
  Source counts = 229.5 +/- 15.9
  Background counts = 22.9
  Rate = 0.006 +/- 0.0004
[Wed Oct 26 03:28:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 03:28:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 03:28:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 03:28:53 2011] Source does appear to be extended
[Wed Oct 26 03:28:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 03:40:02 2011] Writing source region out to fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3_src.reg
[Wed Oct 26 03:40:02 2011] Extracting stamp from image fullrun_ccd1_acisf14354_pi14-548_cl_sm2.00.img.gz, (727, 822) - (867, 962)
[Wed Oct 26 03:40:02 2011] Writing fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3.gif
[Wed Oct 26 03:40:04 2011] Size of ../../acisf14354/products/events/fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3_src.evt.gz[events] = 248 counts
[Wed Oct 26 03:40:04 2011] Mean chipx,y = (186.84, 239.70)
[Wed Oct 26 03:40:04 2011] Mean tdetx,y = (4892.30, 4293.84)
[Wed Oct 26 03:40:04 2011] chipx,y range = (163.00-213.00, 216.00-263.00)
[Wed Oct 26 03:40:04 2011] Size of ../../acisf14354/products/events/fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 50 counts
[Wed Oct 26 03:40:05 2011] rmf not found, will run specextract
[Wed Oct 26 03:40:05 2011] arf not found, will run specextract
[Wed Oct 26 03:40:23 2011] ../../acisf14354/products/spectra/fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3.warf not found
[Wed Oct 26 03:40:23 2011] ../../acisf14354/products/spectra/fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3.wrmf not found
[Wed Oct 26 03:40:23 2011] Removal of ../../acisf14354/products/spectra/fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3.soff failed
[Wed Oct 26 03:47:04 2011] Keeping rmf generated by specextract
[Wed Oct 26 03:47:04 2011] 177.66
[Wed Oct 26 04:05:08 2011] Updating aperture counts using extracted products
[Wed Oct 26 04:05:08 2011] Error reading totcts from fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct 26 04:05:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 04:05:08 2011] Using photon index=1.80, rate=0.00594, arf fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3.arf
[Wed Oct 26 04:05:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 04:05:08 2011] Updating source flux to 8e-14
[Wed Oct 26 04:05:22 2011] Reading fit data from acisf14354/analysis//spectral/fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3_pl.csv
[Wed Oct 26 04:05:22 2011] Spectral fit parameter nH value = 1.08731e+21
[Wed Oct 26 04:05:22 2011] Spectral fit parameter PhoIndex value = 1.7133
[Wed Oct 26 04:05:22 2011] Failed to get F(0.3-8.0) from acisf14354/analysis//spectral/fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 04:05:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 04:05:22 2011] Using Nh = 1.1e+21, photon index=1.71, rate=0.00594, arf fullrun_ccd1_acisf14354_pi14-548_pass1_cl_src3.arf
[Wed Oct 26 04:05:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 04:05:22 2011] Updating source flux to 7.8e-14