[Tue Oct 25 23:57:44 2011] Detection parameters:
  Position = (575.4, 896.7) = 1 2 50.82 -22 11 3.3
  Extent = 1.0" x 0.6", rotation angle = 49 degrees
  Source counts = 311.5 +/- 17.8
  Background counts = 4.5
  Rate = 0.008 +/- 0.0005

[Tue Oct 25 23:57:44 2011] Off-axis axis estimate = 4.55'
[Wed Oct 26 00:01:17 2011] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 00:01:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 00:01:17 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Wed Oct 26 00:01:17 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.959
[Wed Oct 26 00:01:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.01"
[Wed Oct 26 00:31:55 2011] fullrun_ccd0_acisf14354_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 00:31:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14354_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 00:31:55 2011] fullrun_ccd0_acisf14354_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 00:31:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14354_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 00:31:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14354_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14354_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 00:31:56 2011] fullrun_ccd0_acisf14354_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 00:31:56 2011] fullrun_ccd0_acisf14354_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 00:31:56 2011] Fit fullrun_ccd0_acisf14354_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 01:43:53 2011] Spatial fit model total counts = 319.247000, observed total counts = 319.000000
[Wed Oct 26 01:43:53 2011] Offset between fit and detection position for source 1 = 0.484611 pixels
[Wed Oct 26 01:43:53 2011] 322.742000 total counts/ 49.533000 bgd. counts: snr = 38.819299
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.484611 pixels
  Position = (575.6, 897.1) = 1 2 50.82 -22 11 3.3
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 273.2 +/- 18.0
  Background counts = 49.5
  Rate = 0.007 +/- 0.0005
[Wed Oct 26 01:43:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 01:43:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 01:43:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 01:43:53 2011] Source does appear to be extended
[Wed Oct 26 01:43:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 01:44:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 01:44:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 01:44:11 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Oct 26 01:44:11 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.875
[Wed Oct 26 01:44:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.93"
[Wed Oct 26 02:08:24 2011] fullrun_ccd0_acisf14354_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 02:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14354_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 02:08:24 2011] fullrun_ccd0_acisf14354_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 02:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14354_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 02:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14354_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14354_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 02:08:24 2011] fullrun_ccd0_acisf14354_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 02:08:24 2011] fullrun_ccd0_acisf14354_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 02:08:24 2011] Fit fullrun_ccd0_acisf14354_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 03:28:51 2011] Warning, spatial fit 1 centroid is now closest to src. 13
[Wed Oct 26 03:28:51 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 03:28:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 03:28:51 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 03:28:51 2011] Source does appear to be extended
[Wed Oct 26 03:28:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 03:29:09 2011] Writing source region out to fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 03:29:09 2011] Extracting stamp from image fullrun_ccd0_acisf14354_pi14-548_cl_sm2.00.img.gz, (533, 855) - (618, 940)
[Wed Oct 26 03:29:09 2011] Writing fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 03:29:11 2011] Size of ../../acisf14354/products/events/fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1_src.evt.gz[events] = 309 counts
[Wed Oct 26 03:29:11 2011] Mean chipx,y = (862.24, 561.50)
[Wed Oct 26 03:29:11 2011] Mean tdetx,y = (3622.50, 4269.76)
[Wed Oct 26 03:29:11 2011] chipx,y range = (841.00-882.00, 539.00-581.00)
[Wed Oct 26 03:29:11 2011] Size of ../../acisf14354/products/events/fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 25 counts
[Wed Oct 26 03:29:12 2011] rmf not found, will run specextract
[Wed Oct 26 03:29:12 2011] arf not found, will run specextract
[Wed Oct 26 03:29:35 2011] ../../acisf14354/products/spectra/fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1.warf not found
[Wed Oct 26 03:29:35 2011] ../../acisf14354/products/spectra/fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1.wrmf not found
[Wed Oct 26 03:29:35 2011] Removal of ../../acisf14354/products/spectra/fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1.soff failed
[Wed Oct 26 03:40:02 2011] Keeping rmf generated by specextract
[Wed Oct 26 03:40:02 2011] 188.238
[Wed Oct 26 04:05:07 2011] Updating aperture counts using extracted products
[Wed Oct 26 04:05:07 2011] Error reading totcts from fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 04:05:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 04:05:08 2011] Using photon index=1.80, rate=0.00707, arf fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 04:05:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 04:05:08 2011] Updating source flux to 8.9e-14
[Wed Oct 26 04:05:19 2011] Reading fit data from acisf14354/analysis//spectral/fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 04:05:19 2011] Spectral fit parameter nH value = 2.86664e+14
[Wed Oct 26 04:05:19 2011] Spectral fit parameter PhoIndex value = 1.57625
[Wed Oct 26 04:05:19 2011] Failed to get F(0.3-8.0) from acisf14354/analysis//spectral/fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 04:05:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 04:05:19 2011] Using Nh = 2.9e+14, photon index=1.58, rate=0.00707, arf fullrun_ccd0_acisf14354_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 04:05:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 04:05:19 2011] Updating source flux to 9.5e-14