[Sat May 11 15:58:55 2013] Detection parameters:
  Position = (314.9, 499.0) = 2 19 57.58 -5 12 12.8
  Extent = 0.9" x 0.6", rotation angle = 56 degrees
  Source counts = 11.4 +/- 3.6
  Background counts = 1.6
  Rate = 0.0002 +/- 6e-05

[Sat May 11 15:58:56 2013] Off-axis axis estimate = 4.56'
[Sat May 11 16:45:48 2013] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Sat May 11 16:45:48 2013] Initial guess for spatial extent in simple fitting = 1.01"
[Sat May 11 16:45:48 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.143
[Sat May 11 16:45:48 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 1.01"
[Sat May 11 17:29:35 2013] fullrun_ccd3_acisf14348_pi14-548_cl_pass0_src26.ximg exists
[Sat May 11 17:29:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14348_pi14-548_cl_pass0_src26.csv
[Sat May 11 17:29:35 2013] fullrun_ccd3_acisf14348_pi14-548_cl_pass0_src26_1.ximg exists
[Sat May 11 17:29:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14348_pi14-548_cl_pass0_src26.csv
[Sat May 11 17:29:35 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14348_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14348_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 17:29:35 2013] fullrun_ccd3_acisf14348_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sat May 11 17:29:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14348_pi14-548_cl_pass0_tfrozen_src26.csv
[Sat May 11 17:29:35 2013] fullrun_ccd3_acisf14348_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sat May 11 17:29:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14348_pi14-548_cl_pass0_tfrozen_src26.csv
[Sat May 11 17:29:35 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14348_pi14-548_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14348_pi14-548_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 17:29:46 2013] Spatial fit model total counts = 12.806500, observed total counts = 16.000000
[Sat May 11 17:29:46 2013] Offset between fit and detection position for source 26 = 1.247631 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.247631 pixels
  Position = (315.5, 500.0) = 2 19 57.58 -5 12 12.6
  Extent = 0.9 (0.7-1.3)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 5e-05
[Sat May 11 17:29:46 2013] Vigneting correction estimate = 1.000000
[Sat May 11 17:29:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 17:29:46 2013] Assessing source extent using major axis lower bound
[Sat May 11 17:29:46 2013] Source does appear to be extended
[Sat May 11 17:29:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 18:12:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 18:12:39 2013] Initial guess for spatial extent in simple fitting = 0.93"
[Sat May 11 18:12:39 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878
[Sat May 11 18:12:39 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 0.93"
[Sat May 11 18:51:49 2013] fullrun_ccd3_acisf14348_pi14-548_cl_pass1_src26.ximg exists
[Sat May 11 18:51:49 2013] fullrun_ccd3_acisf14348_pi14-548_cl_pass1_src26_1.ximg exists
[Sat May 11 18:51:49 2013] Fit fullrun_ccd3_acisf14348_pi14-548_cl_pass1_src26 appears to have run properly
[Sat May 11 18:51:50 2013] fullrun_ccd3_acisf14348_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Sat May 11 18:51:50 2013] fullrun_ccd3_acisf14348_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Sat May 11 18:51:50 2013] Fit fullrun_ccd3_acisf14348_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Sat May 11 18:52:00 2013] Spatial fit model total counts = 13.745200, observed total counts = 14.000000
[Sat May 11 18:52:00 2013] Offset between fit and detection position for source 26 = 0.575634 pixels
[Sat May 11 18:52:00 2013] 13.687200 total counts/ 0.000000 bgd. counts: snr = 226319745405982.750000
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.575634 pixels
  Position = (315.6, 499.4) = 2 19 57.57 -5 12 12.8
  Extent = 1.1 (0.7-1.5)", rotation angle = 0
  Source counts = 13.7 +/- 3.7
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Sat May 11 18:52:00 2013] Vigneting correction estimate = 1.000000
[Sat May 11 18:52:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 18:52:00 2013] Assessing source extent using major axis lower bound
[Sat May 11 18:52:00 2013] Source does appear to be extended
[Sat May 11 18:52:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 19:08:25 2013] Writing source region out to fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26_src.reg
[Sat May 11 19:08:25 2013] Extracting stamp from image fullrun_ccd3_acisf14348_pi14-548_cl_sm2.00.img.gz, (265, 449) - (367, 550)
[Sat May 11 19:08:25 2013] Writing fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26.gif
[Sat May 11 19:23:05 2013] Size of ../../acisf14348/products/events/fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26_src.evt.gz[events] = 17 counts
[Sat May 11 19:23:05 2013] Mean chipx,y = (872.41, 456.18)
[Sat May 11 19:23:05 2013] Mean tdetx,y = (4675.82, 3933.41)
[Sat May 11 19:23:05 2013] chipx,y range = (855.00-898.00, 436.00-478.00)
[Sat May 11 19:23:05 2013] Size of ../../acisf14348/products/events/fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 38 counts
[Sat May 11 19:23:06 2013] Not generating rmf since there are only 13 counts
[Sat May 11 19:23:06 2013] arf not found, will run specextract
[Sat May 11 19:23:29 2013] ../../acisf14348/products/spectra/fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26.warf not found
[Sat May 11 19:23:29 2013] ../../acisf14348/products/spectra/fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26.wrmf not found
[Sat May 11 19:23:29 2013] Removal of ../../acisf14348/products/spectra/fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26.soff failed
[Sat May 11 19:26:37 2013] Spectrum 26 has only 14 counts, deleting rmf
[Sat May 11 19:26:37 2013] 190.558
[Sat May 11 19:27:25 2013] Updating aperture counts using extracted products
[Sat May 11 19:27:25 2013] Total counts from fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26_src.pi.gz = 17.00
[Sat May 11 19:27:25 2013] Total counts from fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26_bgd.pi.gz = 38.00
[Sat May 11 19:27:25 2013] Got source and background scale factors 0.000004, 0.000045
[Sat May 11 19:27:25 2013] User source parameters:
  Position = (315.6, 499.4) = 2 19 57.57 -5 12 12.8
  Extent = 1.1 (0.7-1.5)", rotation angle = 0
  Source aperture counts = 13.8 +/- 5.2
  Background aperture counts = 3.2
  Rate = 0.0002 +/- 8e-05

[Sat May 11 19:27:26 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 19:27:26 2013] Using photon index=1.80, rate=0.000215, arf fullrun_ccd3_acisf14348_pi14-548_pass1_cl_src26.arf
[Sat May 11 19:27:26 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 19:27:26 2013] Updating source flux to 2.7e-15
[Sat May 11 19:27:42 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting