[Wed Oct 19 05:05:51 2011] Detection parameters:
  Position = (966.2, 246.0) = 1 1 12.97 -22 3 8.8
  Extent = 0.5" x 0.5", rotation angle = 133 degrees
  Source counts = 14.4 +/- 3.9
  Background counts = 0.6
  Rate = 0.0004 +/- 0.0001

[Wed Oct 19 05:05:51 2011] Off-axis axis estimate = 2.21'
[Wed Oct 19 05:27:43 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 05:27:43 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Oct 19 05:27:43 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.744
[Wed Oct 19 05:27:43 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.45"
[Wed Oct 19 05:42:08 2011] fullrun_ccd2_acisf14345_pi14-548_cl_pass0_src8.ximg exists
[Wed Oct 19 05:42:08 2011] fullrun_ccd2_acisf14345_pi14-548_cl_pass0_src8_1.ximg exists
[Wed Oct 19 05:42:08 2011] Fit fullrun_ccd2_acisf14345_pi14-548_cl_pass0_src8 appears to have run properly
[Wed Oct 19 05:42:08 2011] fullrun_ccd2_acisf14345_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Wed Oct 19 05:42:08 2011] fullrun_ccd2_acisf14345_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Oct 19 05:42:08 2011] Fit fullrun_ccd2_acisf14345_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Oct 19 06:23:52 2011] Spatial fit model total counts = 14.888800, observed total counts = 15.000000
[Wed Oct 19 06:23:52 2011] Offset between fit and detection position for source 10 = 0.750818 pixels
[Wed Oct 19 06:23:52 2011] 14.889100 total counts/ 0.000000 bgd. counts: snr = 18611883.925659
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.750818 pixels
  Position = (966.7, 246.5) = 1 1 12.97 -22 3 8.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Wed Oct 19 06:23:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 06:23:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 06:23:52 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 06:23:52 2011] Source does appear to be extended
[Wed Oct 19 06:23:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 06:38:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 06:38:23 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Wed Oct 19 06:38:23 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.011
[Wed Oct 19 06:38:23 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.49"
[Wed Oct 19 06:55:21 2011] fullrun_ccd2_acisf14345_pi14-548_cl_pass1_src8.ximg exists
[Wed Oct 19 06:55:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14345_pi14-548_cl_pass1_src8.csv
[Wed Oct 19 06:55:21 2011] fullrun_ccd2_acisf14345_pi14-548_cl_pass1_src8_1.ximg exists
[Wed Oct 19 06:55:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14345_pi14-548_cl_pass1_src8.csv
[Wed Oct 19 06:55:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14345_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14345_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 06:55:22 2011] fullrun_ccd2_acisf14345_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Wed Oct 19 06:55:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14345_pi14-548_cl_pass1_tfrozen_src8.csv
[Wed Oct 19 06:55:22 2011] fullrun_ccd2_acisf14345_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Oct 19 06:55:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14345_pi14-548_cl_pass1_tfrozen_src8.csv
[Wed Oct 19 06:55:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14345_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14345_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 07:59:55 2011] Spatial fit model total counts = 13.931800, observed total counts = 15.000000
[Wed Oct 19 07:59:55 2011] Offset between fit and detection position for source 10 = 0.072378 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.072378 pixels
  Position = (966.6, 246.5) = 1 1 12.97 -22 3 8.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 13.9 +/- 3.7
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Wed Oct 19 07:59:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 07:59:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 07:59:55 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 07:59:55 2011] Source does appear to be extended
[Wed Oct 19 07:59:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 08:14:05 2011] Writing source region out to fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10_src.reg
[Wed Oct 19 08:14:05 2011] Extracting stamp from image fullrun_ccd2_acisf14345_pi14-548_cl_sm2.00.img.gz, (944, 224) - (990, 269)
[Wed Oct 19 08:14:05 2011] Writing fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10.gif
[Wed Oct 19 08:18:07 2011] Size of ../../acisf14345/products/events/fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10_src.evt.gz[events] = 15 counts
[Wed Oct 19 08:18:07 2011] Mean chipx,y = (332.60, 1005.93)
[Wed Oct 19 08:18:07 2011] Mean tdetx,y = (4066.93, 3753.40)
[Wed Oct 19 08:18:07 2011] chipx,y range = (315.00-350.00, 989.00-1022.00)
[Wed Oct 19 08:18:08 2011] Size of ../../acisf14345/products/events/fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 5 counts
[Wed Oct 19 08:18:09 2011] Not generating rmf since there are only 13 counts
[Wed Oct 19 08:18:09 2011] arf not found, will run specextract
[Wed Oct 19 08:18:40 2011] ../../acisf14345/products/spectra/fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10.warf not found
[Wed Oct 19 08:18:40 2011] ../../acisf14345/products/spectra/fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10.wrmf not found
[Wed Oct 19 08:18:40 2011] Removal of ../../acisf14345/products/spectra/fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10.soff failed
[Wed Oct 19 08:23:14 2011] Spectrum 10 has only 14 counts, deleting rmf
[Wed Oct 19 08:23:14 2011] 192.872
[Wed Oct 19 08:33:05 2011] Updating aperture counts using extracted products
[Wed Oct 19 08:33:05 2011] Error reading totcts from fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Oct 19 08:33:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 08:33:05 2011] Using photon index=1.80, rate=0.000413, arf fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10.arf
[Wed Oct 19 08:33:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 08:33:05 2011] Updating source flux to 5e-15
[Wed Oct 19 08:33:10 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 08:33:11 2011] acisf14345/analysis//spectral/fullrun_ccd2_acisf14345_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete