[Fri Jun 28 15:49:25 2013] Detection parameters:
  Position = (598.1, 707.1) = 13 37 1.12 -29 51 52.3
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 266.7 +/- 18.0
  Background counts = 58.3
  Rate = 0.004 +/- 0.0003

[Fri Jun 28 15:49:28 2013] Off-axis axis estimate = 1.99'
[Fri Jun 28 15:50:55 2013] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 15:50:55 2013] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Jun 28 15:50:55 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.796
[Fri Jun 28 15:50:55 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 0.43"
[Fri Jun 28 15:50:57 2013] fullrun_ccd7_acisf14342_pi14-548_cl_pass0_src27.ximg exists
[Fri Jun 28 15:50:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14342_pi14-548_cl_pass0_src27.csv
[Fri Jun 28 15:50:57 2013] fullrun_ccd7_acisf14342_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Jun 28 15:50:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14342_pi14-548_cl_pass0_src27.csv
[Fri Jun 28 15:50:57 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14342_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14342_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 15:51:00 2013] fullrun_ccd7_acisf14342_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun 28 15:51:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14342_pi14-548_cl_pass0_tfrozen_src27.csv
[Fri Jun 28 15:51:00 2013] fullrun_ccd7_acisf14342_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun 28 15:51:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14342_pi14-548_cl_pass0_tfrozen_src27.csv
[Fri Jun 28 15:51:00 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14342_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14342_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 15:51:23 2013] Spatial fit model total counts = 563.246000, observed total counts = 1168.000000
[Fri Jun 28 15:51:23 2013] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 28 15:51:23 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 15:51:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 15:51:23 2013] Assessing source extent using major
[Fri Jun 28 15:51:23 2013] Source does appear to be extended
[Fri Jun 28 15:51:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 28 15:51:44 2013] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 15:51:44 2013] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Jun 28 15:51:44 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.796
[Fri Jun 28 15:51:44 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 0.43"
[Fri Jun 28 15:51:46 2013] fullrun_ccd7_acisf14342_pi14-548_cl_pass1_src26.ximg exists
[Fri Jun 28 15:51:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14342_pi14-548_cl_pass1_src26.csv
[Fri Jun 28 15:51:46 2013] fullrun_ccd7_acisf14342_pi14-548_cl_pass1_src26_1.ximg exists
[Fri Jun 28 15:51:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14342_pi14-548_cl_pass1_src26.csv
[Fri Jun 28 15:51:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14342_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14342_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 15:51:48 2013] fullrun_ccd7_acisf14342_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Fri Jun 28 15:51:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14342_pi14-548_cl_pass1_tfrozen_src26.csv
[Fri Jun 28 15:51:48 2013] fullrun_ccd7_acisf14342_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jun 28 15:51:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14342_pi14-548_cl_pass1_tfrozen_src26.csv
[Fri Jun 28 15:51:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14342_pi14-548_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14342_pi14-548_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 15:52:06 2013] Source 63 is offset by -7.103507 and -3.659188 pixels which is larger than
2 X fitted extent = 1.220276 x 1.220276, not incorporating fit results
[Fri Jun 28 15:52:06 2013] Spatial fit model total counts = 529.407000, observed total counts = 1168.000000
[Fri Jun 28 15:52:06 2013] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 28 15:52:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 15:52:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 15:52:06 2013] Assessing source extent using major
[Fri Jun 28 15:52:06 2013] Source does appear to be extended
[Fri Jun 28 15:52:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 28 15:53:59 2013] Not overwriting source region fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_src.reg
[Fri Jun 28 15:53:59 2013] Extracting stamp from image fullrun_ccd7_acisf14342_pi14-548_cl_sm2.00.img.gz, (576, 685) - (621, 730)
[Fri Jun 28 15:53:59 2013] Writing fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63.gif
[Fri Jun 28 15:55:14 2013] ../../acisf14342/products/events/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_src.evt and ../../acisf14342/products/events/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_bgd.evt exist, delete to re-create
[Fri Jun 28 15:55:14 2013] Size of ../../acisf14342/products/events/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_src.evt.gz[events] = 295 counts
[Fri Jun 28 15:55:14 2013] Mean chipx,y = (422.26, 514.67)
[Fri Jun 28 15:55:14 2013] Mean tdetx,y = (4339.26, 2216.67)
[Fri Jun 28 15:55:14 2013] chipx,y range = (403.00-441.00, 495.00-533.00)
[Fri Jun 28 15:55:14 2013] Size of ../../acisf14342/products/events/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_bgd.evt.gz[events] = 118 counts
[Fri Jun 28 15:55:14 2013] ../../acisf14342/products/images/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_src.img and ../../acisf14342/products/images/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_bgd.img exist, delete to re-create
[Fri Jun 28 15:55:14 2013] ../../acisf14342/products/spectra/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_src.pi and ../../acisf14342/products/spectra/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_bgd.pi exist, delete to re-create
[Fri Jun 28 15:55:14 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 28 15:55:16 2013] ../../acisf14342/products/lightcurves/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_src.lc and ../../acisf14342/products/lightcurves/fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_bgd.lc exist, delete to re-create
[Fri Jun 28 15:57:16 2013] Keeping rmf generated by specextract
[Fri Jun 28 15:57:16 2013] 232.231
[Fri Jun 28 15:57:29 2013] Updating aperture counts using extracted products
[Fri Jun 28 15:57:29 2013] Total counts from fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_src.pi.gz = 295.00
[Fri Jun 28 15:57:29 2013] Total counts from fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63_bgd.pi.gz = 118.00
[Fri Jun 28 15:57:29 2013] Got source and background scale factors 0.000001, 0.000004
[Fri Jun 28 15:57:29 2013] User source parameters:
  Position = (598.1, 707.1) = 13 37 1.12 -29 51 52.3
  Extent = 0.5" x 0.5", rotation angle = 45
  Source aperture counts = 274.5 +/- 18.2
  Background aperture counts = 20.5
  Rate = 0.004 +/- 0.0003

[Fri Jun 28 15:57:29 2013] Updating counts from extracted products
[Fri Jun 28 15:57:29 2013] Set source signif. to 274.55/4.52 = 60.71
[Fri Jun 28 15:57:35 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 28 15:57:35 2013] Using photon index=1.80, rate=0.00409, arf fullrun_ccd7_acisf14342_pi14-548_pass1_cl_src63.arf
[Fri Jun 28 15:57:35 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun 28 15:57:35 2013] Updating source flux to 3.1e-14
[Fri Jun 28 15:57:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting