[Fri Jun 28 15:49:22 2013] Detection parameters:
  Position = (1163.7, 314.9) = 13 36 48.21 -29 46 48.3
  Extent = 0.6" x 0.5", rotation angle = 163 degrees
  Source counts = 15.8 +/- 4.1
  Background counts = 1.2
  Rate = 0.0002 +/- 6e-05

[Fri Jun 28 15:49:23 2013] Off-axis axis estimate = 4.35'
[Fri Jun 28 15:50:54 2013] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 15:50:54 2013] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Jun 28 15:50:54 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Fri Jun 28 15:50:54 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.94"
[Fri Jun 28 15:50:54 2013] fullrun_ccd6_acisf14342_pi14-548_cl_pass0_src10.ximg exists
[Fri Jun 28 15:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14342_pi14-548_cl_pass0_src10.csv
[Fri Jun 28 15:50:54 2013] fullrun_ccd6_acisf14342_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Jun 28 15:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14342_pi14-548_cl_pass0_src10.csv
[Fri Jun 28 15:50:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14342_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14342_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 15:50:55 2013] fullrun_ccd6_acisf14342_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun 28 15:50:55 2013] fullrun_ccd6_acisf14342_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun 28 15:50:55 2013] Fit fullrun_ccd6_acisf14342_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Jun 28 15:51:10 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.821476 pixels away
[Fri Jun 28 15:51:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 15:51:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 15:51:10 2013] Assessing source extent using major
[Fri Jun 28 15:51:10 2013] Source does appear to be extended
[Fri Jun 28 15:51:10 2013] Computing asymmetry using major and minor axis, asym = 1.25
[Fri Jun 28 15:51:42 2013] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 15:51:42 2013] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Jun 28 15:51:42 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Fri Jun 28 15:51:42 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.94"
[Fri Jun 28 15:51:43 2013] fullrun_ccd6_acisf14342_pi14-548_cl_pass1_src10.ximg exists
[Fri Jun 28 15:51:43 2013] fullrun_ccd6_acisf14342_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Jun 28 15:51:43 2013] Fit fullrun_ccd6_acisf14342_pi14-548_cl_pass1_src10 appears to have run properly
[Fri Jun 28 15:51:44 2013] fullrun_ccd6_acisf14342_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Jun 28 15:51:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14342_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri Jun 28 15:51:44 2013] fullrun_ccd6_acisf14342_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jun 28 15:51:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14342_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri Jun 28 15:51:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14342_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14342_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 15:51:57 2013] Spatial fit model total counts = 27.777100, observed total counts = 30.000000
[Fri Jun 28 15:51:57 2013] Offset between fit and detection position for source 4 = 2.217032 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.217032 pixels
  Position = (1165.4, 313.4) = 13 36 48.17 -29 46 49.3
  Extent = 1.7 (1.4-1.9)" x 0.7 (0.5-0.9)", rotation angle = 53 (41-67) degrees
  Source counts = 27.5 +/- 5.2
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Fri Jun 28 15:51:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 15:51:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 15:51:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 28 15:51:57 2013] Source does appear to be extended
[Fri Jun 28 15:51:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.62
[Fri Jun 28 15:51:57 2013] Source is asymmetric
[Fri Jun 28 15:53:08 2013] Not overwriting source region fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_src.reg
[Fri Jun 28 15:53:08 2013] Extracting stamp from image fullrun_ccd6_acisf14342_pi14-548_cl_sm2.00.img.gz, (1086, 234) - (1244, 392)
[Fri Jun 28 15:53:08 2013] Writing fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4.gif
[Fri Jun 28 15:53:34 2013] ../../acisf14342/products/events/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_src.evt and ../../acisf14342/products/events/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Jun 28 15:53:34 2013] Size of ../../acisf14342/products/events/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_src.evt.gz[events] = 28 counts
[Fri Jun 28 15:53:34 2013] Mean chipx,y = (944.07, 40.43)
[Fri Jun 28 15:53:34 2013] Mean tdetx,y = (3819.07, 1742.43)
[Fri Jun 28 15:53:34 2013] chipx,y range = (925.00-962.00, 23.00-59.00)
[Fri Jun 28 15:53:34 2013] Size of ../../acisf14342/products/events/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 98 counts
[Fri Jun 28 15:53:34 2013] ../../acisf14342/products/images/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_src.img and ../../acisf14342/products/images/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Jun 28 15:53:34 2013] ../../acisf14342/products/spectra/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_src.pi and ../../acisf14342/products/spectra/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Jun 28 15:53:34 2013] Not generating rmf since there are only 27 counts
[Fri Jun 28 15:53:37 2013] ../../acisf14342/products/lightcurves/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_src.lc and ../../acisf14342/products/lightcurves/fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Jun 28 15:53:58 2013] 191.774
[Fri Jun 28 15:57:24 2013] Updating aperture counts using extracted products
[Fri Jun 28 15:57:24 2013] Total counts from fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_src.pi.gz = 28.00
[Fri Jun 28 15:57:24 2013] Total counts from fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4_bgd.pi.gz = 98.00
[Fri Jun 28 15:57:24 2013] Got source and background scale factors 0.000004, 0.000109
[Fri Jun 28 15:57:24 2013] User source parameters:
  Position = (1165.4, 313.4) = 13 36 48.17 -29 46 49.3
  Extent = 1.7 (1.4-1.9)" x 0.7 (0.5-0.9)", rotation angle = 53 (41-67) degrees
  Source aperture counts = 24.8 +/- 6.4
  Background aperture counts = 3.2
  Rate = 0.0004 +/- 9e-05

[Fri Jun 28 15:57:25 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 28 15:57:25 2013] Using photon index=1.80, rate=0.000411, arf fullrun_ccd6_acisf14342_pi14-548_pass1_cl_src4.arf
[Fri Jun 28 15:57:25 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun 28 15:57:25 2013] Updating source flux to 5.1e-15
[Fri Jun 28 15:57:47 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting