[Wed May  1 12:50:43 2013] Detection parameters:
  Position = (840.1, 402.8) = 14 2 50.61 54 16 18.1
  Extent = 0.7" x 0.5", rotation angle = 51 degrees
  Source counts = 13.8 +/- 4.0
  Background counts = 2.2
  Rate = 0.0003 +/- 8e-05

[Wed May  1 12:50:44 2013] Off-axis axis estimate = 2.45'
[Wed May  1 14:44:29 2013] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Wed May  1 14:44:29 2013] Initial guess for spatial extent in simple fitting = 0.49"
[Wed May  1 14:44:29 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.018
[Wed May  1 14:44:29 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 0.49"
[Wed May  1 15:28:38 2013] fullrun_ccd7_acisf14341_pi14-548_cl_pass0_src39.ximg exists
[Wed May  1 15:28:38 2013] fullrun_ccd7_acisf14341_pi14-548_cl_pass0_src39_1.ximg exists
[Wed May  1 15:28:38 2013] Fit fullrun_ccd7_acisf14341_pi14-548_cl_pass0_src39 appears to have run properly
[Wed May  1 15:28:38 2013] fullrun_ccd7_acisf14341_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Wed May  1 15:28:38 2013] fullrun_ccd7_acisf14341_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Wed May  1 15:28:38 2013] Fit fullrun_ccd7_acisf14341_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Wed May  1 15:28:50 2013] Spatial fit model total counts = 20.390200, observed total counts = 21.000000
[Wed May  1 15:28:50 2013] Offset between fit and detection position for source 31 = 1.158502 pixels
[Wed May  1 15:28:50 2013] 19.686870 total counts/ 4.650870 bgd. counts: snr = 6.972126
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.158502 pixels
  Position = (840.9, 403.6) = 14 2 50.60 54 16 18.3
  Extent = 0.7 (0.3-1.0)", rotation angle = 0
  Source counts = 15.0 +/- 4.4
  Background counts = 4.7
  Rate = 0.0003 +/- 9e-05
[Wed May  1 15:28:50 2013] Vigneting correction estimate = 1.000000
[Wed May  1 15:28:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 15:28:50 2013] Assessing source extent using major axis lower bound
[Wed May  1 15:28:50 2013] Source does appear to be extended
[Wed May  1 15:28:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 17:03:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 17:03:57 2013] Initial guess for spatial extent in simple fitting = 0.68"
[Wed May  1 17:03:57 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.122
[Wed May  1 17:03:57 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 0.68"
[Wed May  1 17:46:54 2013] fullrun_ccd7_acisf14341_pi14-548_cl_pass1_src38.ximg exists
[Wed May  1 17:46:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14341_pi14-548_cl_pass1_src38.csv
[Wed May  1 17:46:54 2013] fullrun_ccd7_acisf14341_pi14-548_cl_pass1_src38_1.ximg exists
[Wed May  1 17:46:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14341_pi14-548_cl_pass1_src38.csv
[Wed May  1 17:46:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14341_pi14-548_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14341_pi14-548_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 17:46:54 2013] fullrun_ccd7_acisf14341_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Wed May  1 17:46:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14341_pi14-548_cl_pass1_tfrozen_src38.csv
[Wed May  1 17:46:54 2013] fullrun_ccd7_acisf14341_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Wed May  1 17:46:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14341_pi14-548_cl_pass1_tfrozen_src38.csv
[Wed May  1 17:46:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14341_pi14-548_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14341_pi14-548_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 17:47:06 2013] Spatial fit model total counts = 17.352300, observed total counts = 19.000000
[Wed May  1 17:47:06 2013] Offset between fit and detection position for source 31 = 0.104903 pixels
[Wed May  1 17:47:06 2013] 16.461350 total counts/ 1.617550 bgd. counts: snr = 11.671220
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.104903 pixels
  Position = (840.8, 403.6) = 14 2 50.60 54 16 18.3
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 14.8 +/- 4.1
  Background counts = 1.6
  Rate = 0.0003 +/- 8e-05
[Wed May  1 17:47:06 2013] Vigneting correction estimate = 1.000000
[Wed May  1 17:47:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 17:47:06 2013] Assessing source extent using major axis lower bound
[Wed May  1 17:47:06 2013] Source does appear to be extended
[Wed May  1 17:47:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 18:03:56 2013] Writing source region out to fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31_src.reg
[Wed May  1 18:03:56 2013] Extracting stamp from image fullrun_ccd7_acisf14341_pi14-548_cl_sm2.00.img.gz, (808, 371) - (873, 436)
[Wed May  1 18:03:56 2013] Writing fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31.gif
[Wed May  1 18:15:37 2013] Size of ../../acisf14341/products/events/fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31_src.evt.gz[events] = 16 counts
[Wed May  1 18:15:37 2013] Mean chipx,y = (321.19, 772.62)
[Wed May  1 18:15:37 2013] Mean tdetx,y = (4238.19, 2474.62)
[Wed May  1 18:15:37 2013] chipx,y range = (306.00-339.00, 755.00-792.00)
[Wed May  1 18:15:37 2013] Size of ../../acisf14341/products/events/fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 42 counts
[Wed May  1 18:15:38 2013] Not generating rmf since there are only 14 counts
[Wed May  1 18:15:38 2013] arf not found, will run specextract
[Wed May  1 18:15:46 2013] ../../acisf14341/products/spectra/fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31.warf not found
[Wed May  1 18:15:46 2013] ../../acisf14341/products/spectra/fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31.wrmf not found
[Wed May  1 18:15:46 2013] Removal of ../../acisf14341/products/spectra/fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31.soff failed
[Wed May  1 18:19:33 2013] Spectrum 31 has only 15 counts, deleting rmf
[Wed May  1 18:19:33 2013] 232.305
[Wed May  1 18:19:46 2013] Updating aperture counts using extracted products
[Wed May  1 18:19:46 2013] Total counts from fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31_src.pi.gz = 16.00
[Wed May  1 18:19:46 2013] Total counts from fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31_bgd.pi.gz = 42.00
[Wed May  1 18:19:46 2013] Got source and background scale factors 0.000002, 0.000018
[Wed May  1 18:19:46 2013] User source parameters:
  Position = (840.8, 403.6) = 14 2 50.60 54 16 18.3
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source aperture counts = 12.4 +/- 5.1
  Background aperture counts = 3.6
  Rate = 0.0003 +/- 0.0001

[Wed May  1 18:19:48 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 18:19:48 2013] Using photon index=1.80, rate=0.000302, arf fullrun_ccd7_acisf14341_pi14-548_pass1_cl_src31.arf
[Wed May  1 18:19:48 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 18:19:48 2013] Updating source flux to 2.3e-15
[Wed May  1 18:20:12 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting