[Thu Oct 20 16:37:35 2011] Detection parameters: Position = (442.0, 1068.6) = 1 1 42.14 -21 33 54.7 Extent = 0.5" x 0.5", rotation angle = 115 degrees Source counts = 159.3 +/- 12.7 Background counts = 2.7 Rate = 0.001 +/- 0.0001 [Thu Oct 20 16:37:36 2011] Off-axis axis estimate = 3.19' [Thu Oct 20 18:18:08 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting [Thu Oct 20 18:18:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Oct 20 18:18:08 2011] Initial guess for spatial extent in simple fitting = 0.62" [Thu Oct 20 18:18:08 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.968 [Thu Oct 20 18:18:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.62" [Thu Oct 20 18:42:37 2011] fullrun_ccd3_acisf14338_pi14-548_cl_pass0_src1.ximg exists [Thu Oct 20 18:42:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14338_pi14-548_cl_pass0_src1.csv [Thu Oct 20 18:42:37 2011] fullrun_ccd3_acisf14338_pi14-548_cl_pass0_src1_1.ximg exists [Thu Oct 20 18:42:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14338_pi14-548_cl_pass0_src1.csv [Thu Oct 20 18:42:37 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf14338_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf14338_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Oct 20 18:42:37 2011] fullrun_ccd3_acisf14338_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Thu Oct 20 18:42:37 2011] fullrun_ccd3_acisf14338_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Thu Oct 20 18:42:37 2011] Fit fullrun_ccd3_acisf14338_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Thu Oct 20 18:51:07 2011] Spatial fit model total counts = 166.812000, observed total counts = 166.000000 [Thu Oct 20 18:51:07 2011] Offset between fit and detection position for source 1 = 0.704729 pixels [Thu Oct 20 18:51:07 2011] 166.163910 total counts/ 7.478910 bgd. counts: snr = 58.025210 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.704729 pixels Position = (442.5, 1069.1) = 1 1 42.14 -21 33 54.7 Extent = 0.6 (0.5-0.7)", rotation angle = 0 Source counts = 158.7 +/- 12.9 Background counts = 7.5 Rate = 0.001 +/- 0.0001 [Thu Oct 20 18:51:08 2011] Vigneting correction estimate = 1.000000 [Thu Oct 20 18:51:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Oct 20 18:51:08 2011] Assessing source extent using major axis lower bound [Thu Oct 20 18:51:08 2011] Source does appear to be extended [Thu Oct 20 18:51:08 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Oct 20 20:16:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Oct 20 20:16:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Oct 20 20:16:11 2011] Initial guess for spatial extent in simple fitting = 0.59" [Thu Oct 20 20:16:11 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.032 [Thu Oct 20 20:16:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.59" [Thu Oct 20 20:34:57 2011] fullrun_ccd3_acisf14338_pi14-548_cl_pass1_src1.ximg exists [Thu Oct 20 20:34:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14338_pi14-548_cl_pass1_src1.csv [Thu Oct 20 20:34:58 2011] fullrun_ccd3_acisf14338_pi14-548_cl_pass1_src1_1.ximg exists [Thu Oct 20 20:34:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14338_pi14-548_cl_pass1_src1.csv [Thu Oct 20 20:34:58 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf14338_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf14338_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Oct 20 20:34:58 2011] fullrun_ccd3_acisf14338_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Thu Oct 20 20:34:58 2011] fullrun_ccd3_acisf14338_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Thu Oct 20 20:34:58 2011] Fit fullrun_ccd3_acisf14338_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Thu Oct 20 20:46:38 2011] Spatial fit model total counts = 166.896000, observed total counts = 167.000000 [Thu Oct 20 20:46:38 2011] Offset between fit and detection position for source 1 = 0.004147 pixels [Thu Oct 20 20:46:38 2011] 166.649000 total counts/ 10.174000 bgd. counts: snr = 49.056786 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.004147 pixels Position = (442.5, 1069.1) = 1 1 42.14 -21 33 54.7 Extent = 0.6 (0.5-0.7)", rotation angle = 0 Source counts = 156.5 +/- 12.9 Background counts = 10.2 Rate = 0.001 +/- 0.0001 [Thu Oct 20 20:46:38 2011] Vigneting correction estimate = 1.000000 [Thu Oct 20 20:46:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Oct 20 20:46:38 2011] Assessing source extent using major axis lower bound [Thu Oct 20 20:46:38 2011] Source does appear to be extended [Thu Oct 20 20:46:38 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Oct 20 21:25:52 2011] Writing source region out to fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1_src.reg [Thu Oct 20 21:25:52 2011] Extracting stamp from image fullrun_ccd3_acisf14338_pi14-548_cl_sm2.00.img.gz, (416, 1042) - (469, 1096) [Thu Oct 20 21:25:52 2011] Writing fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1.gif [Thu Oct 20 21:25:54 2011] Size of ../../acisf14338/products/events/fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1_src.evt.gz[events] = 160 counts [Thu Oct 20 21:25:54 2011] Mean chipx,y = (573.71, 956.89) [Thu Oct 20 21:25:54 2011] Mean tdetx,y = (4175.11, 3634.71) [Thu Oct 20 21:25:54 2011] chipx,y range = (555.00-593.00, 940.00-979.00) [Thu Oct 20 21:25:54 2011] Size of ../../acisf14338/products/events/fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 29 counts [Thu Oct 20 21:25:55 2011] rmf not found, will run specextract [Thu Oct 20 21:25:55 2011] arf not found, will run specextract [Thu Oct 20 21:26:29 2011] ../../acisf14338/products/spectra/fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1.warf not found [Thu Oct 20 21:26:29 2011] ../../acisf14338/products/spectra/fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1.wrmf not found [Thu Oct 20 21:26:29 2011] Removal of ../../acisf14338/products/spectra/fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1.soff failed [Thu Oct 20 21:36:06 2011] Keeping rmf generated by specextract [Thu Oct 20 21:36:06 2011] 188.865 [Thu Oct 20 21:38:46 2011] Updating aperture counts using extracted products [Thu Oct 20 21:38:46 2011] Error reading totcts from fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1_src.pi.gz [Thu Oct 20 21:38:46 2011] Calculating source flux in energy range 0.30-8.00 [Thu Oct 20 21:38:46 2011] Using photon index=1.80, rate=0.00133, arf fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1.arf [Thu Oct 20 21:38:46 2011] Assuming count rate is from the 0.20-8.00 bandpass [Thu Oct 20 21:38:46 2011] Updating source flux to 1.7e-14 [Thu Oct 20 21:39:34 2011] Reading fit data from acisf14338/analysis//spectral/fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1_pl.csv [Thu Oct 20 21:39:34 2011] Spectral fit parameter nH value = 6.17629e+20 [Thu Oct 20 21:39:34 2011] Spectral fit parameter PhoIndex value = 2.20798 [Thu Oct 20 21:39:34 2011] Failed to get F(0.3-8.0) from acisf14338/analysis//spectral/fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Thu Oct 20 21:39:34 2011] Calculating source flux in energy range 0.30-8.00 [Thu Oct 20 21:39:34 2011] Using Nh = 6.2e+20, photon index=2.21, rate=0.00133, arf fullrun_ccd3_acisf14338_pi14-548_pass1_cl_src1.arf [Thu Oct 20 21:39:34 2011] Assuming count rate is from the 0.20-8.00 bandpass [Thu Oct 20 21:39:34 2011] Updating source flux to 1.5e-14