[Mon Oct 17 01:50:15 2011] Detection parameters:
  Position = (656.4, 250.3) = 1 2 45.00 -21 42 40.3
  Extent = 2.3" x 1.4", rotation angle = 58 degrees
  Source counts = 1633.8 +/- 41.7
  Background counts = 105.2
  Rate = 0.01 +/- 0.0003

[Mon Oct 17 01:50:15 2011] Off-axis axis estimate = 7.83'
[Mon Oct 17 04:13:03 2011] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 04:13:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 04:13:03 2011] Initial guess for spatial extent in simple fitting = 2.71"
[Mon Oct 17 04:13:03 2011] source mask rpix=5.5, npix_max = 144, mask sum = 144, frac = 0.995
[Mon Oct 17 04:13:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.71"
[Mon Oct 17 04:48:38 2011] fullrun_ccd3_acisf14333_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 04:48:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14333_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 04:48:38 2011] fullrun_ccd3_acisf14333_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 04:48:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14333_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 04:48:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14333_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14333_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 04:48:38 2011] fullrun_ccd3_acisf14333_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 04:48:38 2011] fullrun_ccd3_acisf14333_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 04:48:38 2011] Fit fullrun_ccd3_acisf14333_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 05:28:23 2011] Spatial fit model total counts = 1769.000000, observed total counts = 1769.000000
[Mon Oct 17 05:28:23 2011] Offset between fit and detection position for source 32 = 1.016425 pixels
[Mon Oct 17 05:28:23 2011] 1768.517000 total counts/ 186.817000 bgd. counts: snr = 115.721997
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 1.016425 pixels
  Position = (657.2, 251.0) = 1 2 45.00 -21 42 40.2
  Extent = 2.1 (2.0-2.2)", rotation angle = 0
  Source counts = 1581.7 +/- 42.1
  Background counts = 186.8
  Rate = 0.01 +/- 0.0003
[Mon Oct 17 05:28:23 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 05:28:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 05:28:23 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 05:28:23 2011] Source does appear to be extended
[Mon Oct 17 05:28:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 07:20:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 07:20:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 07:20:24 2011] Initial guess for spatial extent in simple fitting = 2.09"
[Mon Oct 17 07:20:24 2011] source mask rpix=4.2, npix_max = 90, mask sum = 100, frac = 1.110
[Mon Oct 17 07:20:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.09"
[Mon Oct 17 07:50:35 2011] fullrun_ccd3_acisf14333_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 07:50:35 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf14333_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 07:50:35 2011] fullrun_ccd3_acisf14333_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 07:50:35 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf14333_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 07:50:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14333_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14333_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:50:35 2011] fullrun_ccd3_acisf14333_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 07:50:35 2011] fullrun_ccd3_acisf14333_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 07:50:35 2011] Fit fullrun_ccd3_acisf14333_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 08:26:47 2011] Spatial fit model total counts = 1730.180000, observed total counts = 1731.000000
[Mon Oct 17 08:26:47 2011] Offset between fit and detection position for source 32 = 0.081049 pixels
[Mon Oct 17 08:26:47 2011] 1728.001000 total counts/ 262.541000 bgd. counts: snr = 90.443092
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.081049 pixels
  Position = (657.2, 251.1) = 1 2 45.00 -21 42 40.2
  Extent = 1.9 (1.8-2.0)", rotation angle = 0
  Source counts = 1465.5 +/- 41.6
  Background counts = 262.5
  Rate = 0.01 +/- 0.0003
[Mon Oct 17 08:26:47 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:47 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:47 2011] Source does appear to be extended
[Mon Oct 17 08:26:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 09:20:01 2011] Writing source region out to fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32_src.reg
[Mon Oct 17 09:20:01 2011] Extracting stamp from image fullrun_ccd3_acisf14333_pi14-548_cl_sm2.00.img.gz, (570, 164) - (744, 338)
[Mon Oct 17 09:20:01 2011] Writing fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32.gif
[Mon Oct 17 09:20:04 2011] Size of ../../acisf14333/products/events/fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32_src.evt.gz[events] = 1679 counts
[Mon Oct 17 09:20:04 2011] Mean chipx,y = (599.97, 133.91)
[Mon Oct 17 09:20:04 2011] Mean tdetx,y = (4998.09, 3660.97)
[Mon Oct 17 09:20:04 2011] chipx,y range = (574.00-631.00, 103.00-165.00)
[Mon Oct 17 09:20:04 2011] Size of ../../acisf14333/products/events/fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 296 counts
[Mon Oct 17 09:20:05 2011] rmf not found, will run specextract
[Mon Oct 17 09:20:05 2011] arf not found, will run specextract
[Mon Oct 17 09:20:20 2011] ../../acisf14333/products/spectra/fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32.warf not found
[Mon Oct 17 09:20:20 2011] ../../acisf14333/products/spectra/fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32.wrmf not found
[Mon Oct 17 09:20:20 2011] Removal of ../../acisf14333/products/spectra/fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32.soff failed
[Mon Oct 17 09:34:30 2011] Keeping rmf generated by specextract
[Mon Oct 17 09:34:30 2011] 171.708
[Mon Oct 17 09:40:12 2011] Updating aperture counts using extracted products
[Mon Oct 17 09:40:12 2011] Error reading totcts from fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32_src.pi.gz
[Mon Oct 17 09:40:13 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:40:13 2011] Using photon index=1.80, rate=0.0109, arf fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32.arf
[Mon Oct 17 09:40:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:40:13 2011] Updating source flux to 1.5e-13
[Mon Oct 17 09:41:21 2011] Reading fit data from acisf14333/analysis//spectral/fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32_pl.csv
[Mon Oct 17 09:41:21 2011] Spectral fit parameter nH value = 5.7091e+13
[Mon Oct 17 09:41:21 2011] Spectral fit parameter PhoIndex value = 1.90576
[Mon Oct 17 09:41:21 2011] Failed to get F(0.3-8.0) from acisf14333/analysis//spectral/fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 09:41:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:41:21 2011] Using Nh = 5.7e+13, photon index=1.91, rate=0.0109, arf fullrun_ccd3_acisf14333_pi14-548_pass1_cl_src32.arf
[Mon Oct 17 09:41:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:41:21 2011] Updating source flux to 1.6e-13