[Mon Oct 17 01:49:43 2011] Detection parameters:
  Position = (526.3, 586.5) = 1 2 59.46 -21 31 42.0
  Extent = 1.2" x 0.7", rotation angle = 134 degrees
  Source counts = 162.8 +/- 13.1
  Background counts = 8.2
  Rate = 0.001 +/- 0.0001

[Mon Oct 17 01:49:44 2011] Off-axis axis estimate = 4.97'
[Mon Oct 17 03:37:39 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 03:37:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 03:37:39 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Mon Oct 17 03:37:39 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.910
[Mon Oct 17 03:37:39 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.17"
[Mon Oct 17 04:13:02 2011] fullrun_ccd2_acisf14333_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 04:13:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14333_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 04:13:02 2011] fullrun_ccd2_acisf14333_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 04:13:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14333_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 04:13:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14333_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14333_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 04:13:03 2011] fullrun_ccd2_acisf14333_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 04:13:03 2011] fullrun_ccd2_acisf14333_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 04:13:03 2011] Fit fullrun_ccd2_acisf14333_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 05:28:17 2011] Spatial fit model total counts = 173.943000, observed total counts = 174.000000
[Mon Oct 17 05:28:17 2011] Offset between fit and detection position for source 1 = 0.881921 pixels
[Mon Oct 17 05:28:17 2011] 173.973100 total counts/ 28.659100 bgd. counts: snr = 27.144146
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.881921 pixels
  Position = (526.8, 587.2) = 1 2 59.46 -21 31 41.9
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 145.3 +/- 13.2
  Background counts = 28.7
  Rate = 0.001 +/- 0.0001
[Mon Oct 17 05:28:17 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 05:28:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 05:28:17 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 05:28:17 2011] Source does appear to be extended
[Mon Oct 17 05:28:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:50:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:50:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 06:50:43 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Mon Oct 17 06:50:43 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Mon Oct 17 06:50:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.97"
[Mon Oct 17 07:20:24 2011] fullrun_ccd2_acisf14333_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 07:20:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14333_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 07:20:24 2011] fullrun_ccd2_acisf14333_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 07:20:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14333_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 07:20:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14333_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14333_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 07:20:24 2011] fullrun_ccd2_acisf14333_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 07:20:24 2011] fullrun_ccd2_acisf14333_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 07:20:24 2011] Fit fullrun_ccd2_acisf14333_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 08:26:43 2011] Warning, spatial fit 1 centroid is now closest to src. 24
[Mon Oct 17 08:26:43 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:43 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:43 2011] Source does appear to be extended
[Mon Oct 17 08:26:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 09:01:37 2011] Writing source region out to fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 17 09:01:37 2011] Extracting stamp from image fullrun_ccd2_acisf14333_pi14-548_cl_sm2.00.img.gz, (482, 543) - (571, 632)
[Mon Oct 17 09:01:37 2011] Writing fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1.gif
[Mon Oct 17 09:01:39 2011] Size of ../../acisf14333/products/events/fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1_src.evt.gz[events] = 164 counts
[Mon Oct 17 09:01:39 2011] Mean chipx,y = (395.43, 534.39)
[Mon Oct 17 09:01:39 2011] Mean tdetx,y = (3595.39, 3690.57)
[Mon Oct 17 09:01:39 2011] chipx,y range = (376.00-416.00, 510.00-558.00)
[Mon Oct 17 09:01:39 2011] Size of ../../acisf14333/products/events/fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 62 counts
[Mon Oct 17 09:01:40 2011] rmf not found, will run specextract
[Mon Oct 17 09:01:40 2011] arf not found, will run specextract
[Mon Oct 17 09:02:13 2011] ../../acisf14333/products/spectra/fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1.warf not found
[Mon Oct 17 09:02:13 2011] ../../acisf14333/products/spectra/fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1.wrmf not found
[Mon Oct 17 09:02:13 2011] Removal of ../../acisf14333/products/spectra/fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1.soff failed
[Mon Oct 17 09:20:01 2011] Keeping rmf generated by specextract
[Mon Oct 17 09:20:01 2011] 181.949
[Mon Oct 17 09:40:12 2011] Updating aperture counts using extracted products
[Mon Oct 17 09:40:12 2011] Error reading totcts from fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 17 09:40:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:40:12 2011] Using photon index=1.80, rate=0.00108, arf fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 09:40:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:40:12 2011] Updating source flux to 1.4e-14
[Mon Oct 17 09:40:58 2011] Reading fit data from acisf14333/analysis//spectral/fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 17 09:40:58 2011] Spectral fit parameter nH value = 1.13093e+21
[Mon Oct 17 09:40:58 2011] Spectral fit parameter PhoIndex value = 2.11781
[Mon Oct 17 09:40:58 2011] Failed to get F(0.3-8.0) from acisf14333/analysis//spectral/fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 09:40:58 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:40:58 2011] Using Nh = 1.1e+21, photon index=2.12, rate=0.00108, arf fullrun_ccd2_acisf14333_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 09:40:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:40:58 2011] Updating source flux to 1.2e-14