[Mon Oct 17 01:49:14 2011] Detection parameters:
  Position = (404.2, 141.3) = 1 3 29.36 -21 45 52.7
  Extent = 4.4" x 3.3", rotation angle = 25 degrees
  Source counts = 391.8 +/- 22.5
  Background counts = 115.2
  Rate = 0.003 +/- 0.0002

[Mon Oct 17 01:49:14 2011] Off-axis axis estimate = 10.92'
[Mon Oct 17 02:37:03 2011] Using EEF radius (= 5.30 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 02:37:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 02:37:03 2011] Initial guess for spatial extent in simple fitting = 5.30"
[Mon Oct 17 02:37:03 2011] source mask rpix=10.8, npix_max = 509, mask sum = 529, frac = 1.039
[Mon Oct 17 02:37:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.30"
[Mon Oct 17 03:37:38 2011] fullrun_ccd1_acisf14333_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 03:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14333_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 03:37:38 2011] fullrun_ccd1_acisf14333_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 03:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14333_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 03:37:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14333_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14333_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 03:37:39 2011] fullrun_ccd1_acisf14333_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 03:37:39 2011] fullrun_ccd1_acisf14333_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 03:37:39 2011] Fit fullrun_ccd1_acisf14333_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 05:28:14 2011] Spatial fit model total counts = 646.684000, observed total counts = 641.000000
[Mon Oct 17 05:28:14 2011] Offset between fit and detection position for source 43 = 1.091481 pixels
[Mon Oct 17 05:28:14 2011] 646.826000 total counts/ 244.921000 bgd. counts: snr = 25.680909
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 1.091481 pixels
  Position = (404.3, 142.4) = 1 3 29.38 -21 45 52.4
  Extent = 4.1 (3.8-4.5)", rotation angle = 0
  Source counts = 401.9 +/- 25.4
  Background counts = 244.9
  Rate = 0.003 +/- 0.0002
[Mon Oct 17 05:28:14 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 05:28:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 05:28:14 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 05:28:14 2011] Source does appear to be extended
[Mon Oct 17 05:28:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:02:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:02:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 06:02:13 2011] Initial guess for spatial extent in simple fitting = 4.13"
[Mon Oct 17 06:02:13 2011] source mask rpix=8.4, npix_max = 317, mask sum = 306, frac = 0.965
[Mon Oct 17 06:02:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.13"
[Mon Oct 17 06:50:43 2011] fullrun_ccd1_acisf14333_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 06:50:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf14333_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 06:50:43 2011] fullrun_ccd1_acisf14333_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 06:50:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf14333_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 06:50:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14333_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14333_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:50:43 2011] fullrun_ccd1_acisf14333_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 06:50:43 2011] fullrun_ccd1_acisf14333_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 06:50:43 2011] Fit fullrun_ccd1_acisf14333_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 08:26:40 2011] Spatial fit model total counts = 561.998000, observed total counts = 562.000000
[Mon Oct 17 08:26:40 2011] Offset between fit and detection position for source 43 = 0.176087 pixels
[Mon Oct 17 08:26:40 2011] 562.451000 total counts/ 180.178000 bgd. counts: snr = 28.478869
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.176087 pixels
  Position = (404.1, 142.4) = 1 3 29.39 -21 45 52.4
  Extent = 4.0 (3.6-4.4)", rotation angle = 0
  Source counts = 382.3 +/- 23.7
  Background counts = 180.2
  Rate = 0.003 +/- 0.0002
[Mon Oct 17 08:26:40 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:26:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:26:40 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:26:40 2011] Source does appear to be extended
[Mon Oct 17 08:26:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:39:26 2011] Writing source region out to fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43_src.reg
[Mon Oct 17 08:39:26 2011] Extracting stamp from image fullrun_ccd1_acisf14333_pi14-548_cl_sm2.00.img.gz, (221, 0) - (587, 326)
[Mon Oct 17 08:39:26 2011] Writing fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43.gif
[Mon Oct 17 08:39:28 2011] Size of ../../acisf14333/products/events/fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43_src.evt.gz[events] = 518 counts
[Mon Oct 17 08:39:28 2011] Mean chipx,y = (872.32, 98.21)
[Mon Oct 17 08:39:28 2011] Mean tdetx,y = (5033.79, 4979.32)
[Mon Oct 17 08:39:28 2011] chipx,y range = (829.00-918.00, 54.00-144.00)
[Mon Oct 17 08:39:28 2011] Size of ../../acisf14333/products/events/fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 1044 counts
[Mon Oct 17 08:39:30 2011] rmf not found, will run specextract
[Mon Oct 17 08:39:30 2011] arf not found, will run specextract
[Mon Oct 17 08:39:43 2011] ../../acisf14333/products/spectra/fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43.warf not found
[Mon Oct 17 08:39:43 2011] ../../acisf14333/products/spectra/fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43.wrmf not found
[Mon Oct 17 08:39:43 2011] Removal of ../../acisf14333/products/spectra/fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43.soff failed
[Mon Oct 17 09:01:36 2011] Keeping rmf generated by specextract
[Mon Oct 17 09:01:36 2011] 158.117
[Mon Oct 17 09:40:11 2011] Updating aperture counts using extracted products
[Mon Oct 17 09:40:11 2011] Error reading totcts from fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43_src.pi.gz
[Mon Oct 17 09:40:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:40:11 2011] Using photon index=1.80, rate=0.00284, arf fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43.arf
[Mon Oct 17 09:40:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:40:11 2011] Updating source flux to 4.4e-14
[Mon Oct 17 09:40:45 2011] Reading fit data from acisf14333/analysis//spectral/fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43_pl.csv
[Mon Oct 17 09:40:45 2011] Spectral fit parameter nH value = 3.81364e+21
[Mon Oct 17 09:40:45 2011] Spectral fit parameter PhoIndex value = 1.89547
[Mon Oct 17 09:40:45 2011] Failed to get F(0.3-8.0) from acisf14333/analysis//spectral/fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 09:40:45 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 09:40:45 2011] Using Nh = 3.8e+21, photon index=1.90, rate=0.00284, arf fullrun_ccd1_acisf14333_pi14-548_pass1_cl_src43.arf
[Mon Oct 17 09:40:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 09:40:45 2011] Updating source flux to 4.1e-14