[Wed May  8 00:25:11 2013] Detection parameters:
  Position = (708.2, 728.8) = 12 43 37.09 11 36 45.5
  Extent = 0.6" x 0.5", rotation angle = 38 degrees
  Source counts = 11.3 +/- 3.5
  Background counts = 0.7
  Rate = 0.0008 +/- 0.0002

[Wed May  8 00:25:12 2013] Off-axis axis estimate = 3.97'
[Wed May  8 00:45:07 2013] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Wed May  8 00:45:07 2013] Initial guess for spatial extent in simple fitting = 0.82"
[Wed May  8 00:45:07 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed May  8 00:45:07 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 0.82"
[Wed May  8 01:37:02 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src42.ximg exists
[Wed May  8 01:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src42.csv
[Wed May  8 01:37:02 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src42_1.ximg exists
[Wed May  8 01:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src42.csv
[Wed May  8 01:37:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 01:37:02 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src42.ximg exists
[Wed May  8 01:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src42.csv
[Wed May  8 01:37:02 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src42_1.ximg exists
[Wed May  8 01:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src42.csv
[Wed May  8 01:37:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 01:37:13 2013] Spatial fit model total counts = 11.353700, observed total counts = 13.000000
[Wed May  8 01:37:13 2013] Offset between fit and detection position for source 46 = 0.701099 pixels
[Wed May  8 01:37:13 2013] 11.339005 total counts/ 0.000305 bgd. counts: snr = 649.191414
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.701099 pixels
  Position = (708.8, 729.2) = 12 43 37.08 11 36 45.5
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 11.3 +/- 3.4
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Wed May  8 01:37:13 2013] Vigneting correction estimate = 1.000000
[Wed May  8 01:37:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 01:37:13 2013] Assessing source extent using major axis lower bound
[Wed May  8 01:37:13 2013] Source does appear to be extended
[Wed May  8 01:37:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 01:53:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 01:53:26 2013] Initial guess for spatial extent in simple fitting = 0.77"
[Wed May  8 01:53:26 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Wed May  8 01:53:26 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 0.77"
[Wed May  8 02:40:32 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src39.ximg exists
[Wed May  8 02:40:32 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src39_1.ximg exists
[Wed May  8 02:40:32 2013] Fit fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src39 appears to have run properly
[Wed May  8 02:40:32 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Wed May  8 02:40:32 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Wed May  8 02:40:32 2013] Fit fullrun_ccd7_acisf14328_pi14-548_cl_pass1_tfrozen_src39 appears to have run properly
[Wed May  8 02:40:41 2013] Spatial fit model total counts = 14.222900, observed total counts = 14.000000
[Wed May  8 02:40:41 2013] Offset between fit and detection position for source 46 = 0.076889 pixels
[Wed May  8 02:40:41 2013] 14.448810 total counts/ 2.769210 bgd. counts: snr = 7.018592
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.076889 pixels
  Position = (708.8, 729.2) = 12 43 37.09 11 36 45.5
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 11.7 +/- 3.8
  Background counts = 2.8
  Rate = 0.0008 +/- 0.0003
[Wed May  8 02:40:41 2013] Vigneting correction estimate = 1.000000
[Wed May  8 02:40:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 02:40:41 2013] Assessing source extent using major axis lower bound
[Wed May  8 02:40:41 2013] Source does appear to be extended
[Wed May  8 02:40:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 02:49:00 2013] Writing source region out to fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46_src.reg
[Wed May  8 02:49:00 2013] Extracting stamp from image fullrun_ccd7_acisf14328_pi14-548_cl_sm2.00.img.gz, (674, 695) - (743, 764)
[Wed May  8 02:49:00 2013] Writing fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46.gif
[Wed May  8 02:59:57 2013] Size of ../../acisf14328/products/events/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46_src.evt.gz[events] = 12 counts
[Wed May  8 02:59:57 2013] Mean chipx,y = (655.58, 667.33)
[Wed May  8 02:59:57 2013] Mean tdetx,y = (4572.58, 2369.33)
[Wed May  8 02:59:57 2013] chipx,y range = (637.00-671.00, 650.00-682.00)
[Wed May  8 02:59:57 2013] Size of ../../acisf14328/products/events/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46_bgd.evt.gz[events] = 8 counts
[Wed May  8 02:59:58 2013] Not generating rmf since there are only 11 counts
[Wed May  8 02:59:58 2013] arf not found, will run specextract
[Wed May  8 03:00:06 2013] ../../acisf14328/products/spectra/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46.warf not found
[Wed May  8 03:00:06 2013] ../../acisf14328/products/spectra/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46.wrmf not found
[Wed May  8 03:00:06 2013] Removal of ../../acisf14328/products/spectra/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46.soff failed
[Wed May  8 03:00:34 2013] Spectrum 46 has only 12 counts, deleting rmf
[Wed May  8 03:00:34 2013] 223.199
[Wed May  8 03:00:42 2013] Updating aperture counts using extracted products
[Wed May  8 03:00:42 2013] Total counts from fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46_src.pi.gz = 12.00
[Wed May  8 03:00:42 2013] Total counts from fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46_bgd.pi.gz = 8.00
[Wed May  8 03:00:42 2013] Got source and background scale factors 0.000002, 0.000021
[Wed May  8 03:00:42 2013] User source parameters:
  Position = (708.8, 729.2) = 12 43 37.09 11 36 45.5
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source aperture counts = 11.3 +/- 4.6
  Background aperture counts = 0.7
  Rate = 0.0008 +/- 0.0003

[Wed May  8 03:00:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:00:43 2013] Using photon index=1.80, rate=0.000836, arf fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src46.arf
[Wed May  8 03:00:43 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 03:00:43 2013] Updating source flux to 6.5e-15
[Wed May  8 03:00:51 2013] Source 46 has fewer than 100.000000 counts, skipping spectral fitting