[Wed May  8 00:25:11 2013] Detection parameters:
  Position = (734.0, 295.4) = 12 43 36.22 11 33 12.3
  Extent = 0.5" x 0.5", rotation angle = 76 degrees
  Source counts = 10.6 +/- 3.6
  Background counts = 2.4
  Rate = 0.0008 +/- 0.0003

[Wed May  8 00:25:12 2013] Off-axis axis estimate = 1.14'
[Wed May  8 00:45:07 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed May  8 00:45:07 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Wed May  8 00:45:07 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Wed May  8 00:45:07 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 0.38"
[Wed May  8 01:37:02 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src46.ximg exists
[Wed May  8 01:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src46.csv
[Wed May  8 01:37:02 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src46_1.ximg exists
[Wed May  8 01:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src46.csv
[Wed May  8 01:37:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14328_pi14-548_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 01:37:02 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src46.ximg exists
[Wed May  8 01:37:02 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src46_1.ximg exists
[Wed May  8 01:37:02 2013] Fit fullrun_ccd7_acisf14328_pi14-548_cl_pass0_tfrozen_src46 appears to have run properly
[Wed May  8 01:37:13 2013] Spatial fit model total counts = 18.957500, observed total counts = 23.000000
[Wed May  8 01:37:13 2013] Offset between fit and detection position for source 21 = 1.920329 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.920329 pixels
  Position = (734.5, 297.3) = 12 43 36.22 11 33 13.0
  Extent = 1.2 (0.9-1.5)" x 0.3 (0.3-0.5)", rotation angle = 91 (81-101) degrees
  Source counts = 16.9 +/- 4.1
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May  8 01:37:13 2013] Vigneting correction estimate = 1.000000
[Wed May  8 01:37:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 01:37:13 2013] Assessing source extent using major axis lower bound
[Wed May  8 01:37:13 2013] Source does appear to be extended
[Wed May  8 01:37:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.76
[Wed May  8 01:37:13 2013] Source is asymmetric
[Wed May  8 01:53:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 01:53:26 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Wed May  8 01:53:26 2013] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.194
[Wed May  8 01:53:26 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 0.76"
[Wed May  8 02:40:32 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src41.ximg exists
[Wed May  8 02:40:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src41.csv
[Wed May  8 02:40:32 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src41_1.ximg exists
[Wed May  8 02:40:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src41.csv
[Wed May  8 02:40:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14328_pi14-548_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 02:40:32 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass1_tfrozen_src41.ximg exists
[Wed May  8 02:40:32 2013] fullrun_ccd7_acisf14328_pi14-548_cl_pass1_tfrozen_src41_1.ximg exists
[Wed May  8 02:40:32 2013] Fit fullrun_ccd7_acisf14328_pi14-548_cl_pass1_tfrozen_src41 appears to have run properly
[Wed May  8 02:40:41 2013] Spatial fit model total counts = 19.372900, observed total counts = 24.000000
[Wed May  8 02:40:41 2013] Offset between fit and detection position for source 21 = 0.018662 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.018662 pixels
  Position = (734.5, 297.3) = 12 43 36.22 11 33 13.0
  Extent = 1.1 (0.9-1.5)" x 0.3 (0.3-0.4)", rotation angle = 92 (86-99) degrees
  Source counts = 17.2 +/- 4.1
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May  8 02:40:41 2013] Vigneting correction estimate = 1.000000
[Wed May  8 02:40:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 02:40:41 2013] Assessing source extent using major axis lower bound
[Wed May  8 02:40:41 2013] Source does appear to be extended
[Wed May  8 02:40:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.93
[Wed May  8 02:40:41 2013] Source is asymmetric
[Wed May  8 02:49:00 2013] Writing source region out to fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21_src.reg
[Wed May  8 02:49:00 2013] Extracting stamp from image fullrun_ccd7_acisf14328_pi14-548_cl_sm2.00.img.gz, (684, 246) - (785, 348)
[Wed May  8 02:49:00 2013] Writing fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21.gif
[Wed May  8 03:00:15 2013] Size of ../../acisf14328/products/events/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21_src.evt.gz[events] = 19 counts
[Wed May  8 03:00:15 2013] Mean chipx,y = (216.74, 638.95)
[Wed May  8 03:00:15 2013] Mean tdetx,y = (4133.74, 2340.95)
[Wed May  8 03:00:15 2013] chipx,y range = (201.00-235.00, 624.00-653.00)
[Wed May  8 03:00:15 2013] Size of ../../acisf14328/products/events/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 175 counts
[Wed May  8 03:00:16 2013] Not generating rmf since there are only 17 counts
[Wed May  8 03:00:16 2013] arf not found, will run specextract
[Wed May  8 03:00:24 2013] ../../acisf14328/products/spectra/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21.warf not found
[Wed May  8 03:00:24 2013] ../../acisf14328/products/spectra/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21.wrmf not found
[Wed May  8 03:00:24 2013] Removal of ../../acisf14328/products/spectra/fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21.soff failed
[Wed May  8 03:00:34 2013] Spectrum 21 has only 17 counts, deleting rmf
[Wed May  8 03:00:34 2013] 234.283
[Wed May  8 03:00:42 2013] Updating aperture counts using extracted products
[Wed May  8 03:00:42 2013] Total counts from fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21_src.pi.gz = 19.00
[Wed May  8 03:00:42 2013] Total counts from fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21_bgd.pi.gz = 175.00
[Wed May  8 03:00:42 2013] Got source and background scale factors 0.000001, 0.000045
[Wed May  8 03:00:42 2013] User source parameters:
  Position = (734.5, 297.3) = 12 43 36.22 11 33 13.0
  Extent = 1.1 (0.9-1.5)" x 0.3 (0.3-0.4)", rotation angle = 92 (86-99) degrees
  Source aperture counts = 14.4 +/- 5.4
  Background aperture counts = 4.6
  Rate = 0.001 +/- 0.0004

[Wed May  8 03:00:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:00:43 2013] Using photon index=1.80, rate=0.00123, arf fullrun_ccd7_acisf14328_pi14-548_pass1_cl_src21.arf
[Wed May  8 03:00:43 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 03:00:43 2013] Updating source flux to 9.2e-15
[Wed May  8 03:00:51 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting