[Sat May 11 12:21:53 2013] Detection parameters: Position = (299.7, 556.5) = 23 58 9.66 -32 36 16.9 Extent = 0.5" x 0.5", rotation angle = 42 degrees Source counts = 81.7 +/- 9.2 Background counts = 3.3 Rate = 0.001 +/- 0.0002 [Sat May 11 12:21:53 2013] Off-axis axis estimate = 3.86' [Sat May 11 14:25:26 2013] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting [Sat May 11 14:25:26 2013] Initial guess for spatial extent in simple fitting = 0.79" [Sat May 11 14:25:26 2013] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.733 [Sat May 11 14:25:26 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.79" [Sat May 11 15:03:23 2013] fullrun_ccd7_acisf14231_pi14-548_cl_pass0_src10.ximg exists [Sat May 11 15:03:23 2013] fullrun_ccd7_acisf14231_pi14-548_cl_pass0_src10_1.ximg exists [Sat May 11 15:03:23 2013] Fit fullrun_ccd7_acisf14231_pi14-548_cl_pass0_src10 appears to have run properly [Sat May 11 15:03:23 2013] fullrun_ccd7_acisf14231_pi14-548_cl_pass0_tfrozen_src10.ximg exists [Sat May 11 15:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14231_pi14-548_cl_pass0_tfrozen_src10.csv [Sat May 11 15:03:23 2013] fullrun_ccd7_acisf14231_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists [Sat May 11 15:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14231_pi14-548_cl_pass0_tfrozen_src10.csv [Sat May 11 15:03:23 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf14231_pi14-548_cl_pass0_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf14231_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 11 15:03:35 2013] Spatial fit model total counts = 95.756400, observed total counts = 100.000000 [Sat May 11 15:03:35 2013] Offset between fit and detection position for source 11 = 0.855957 pixels [Sat May 11 15:03:35 2013] 96.172500 total counts/ 8.710200 bgd. counts: snr = 29.635130 Spatial fit parameters: Offset between fit and detection position for source 11 = 0.855957 pixels Position = (300.4, 556.9) = 23 58 9.65 -32 36 17.0 Extent = 1.1 (0.9-1.3)" x 0.5 (0.4-0.7)", rotation angle = 338 (326-350) degrees Source counts = 87.5 +/- 9.8 Background counts = 8.7 Rate = 0.001 +/- 0.0002 [Sat May 11 15:03:35 2013] Vigneting correction estimate = 1.000000 [Sat May 11 15:03:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 11 15:03:35 2013] Assessing source extent using major axis lower bound [Sat May 11 15:03:35 2013] Source does appear to be extended [Sat May 11 15:03:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.19 [Sat May 11 16:51:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 11 16:51:42 2013] Initial guess for spatial extent in simple fitting = 0.80" [Sat May 11 16:51:42 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.879 [Sat May 11 16:51:42 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.80" [Sat May 11 17:27:22 2013] fullrun_ccd7_acisf14231_pi14-548_cl_pass1_src10.ximg exists [Sat May 11 17:27:22 2013] fullrun_ccd7_acisf14231_pi14-548_cl_pass1_src10_1.ximg exists [Sat May 11 17:27:22 2013] Fit fullrun_ccd7_acisf14231_pi14-548_cl_pass1_src10 appears to have run properly [Sat May 11 17:27:22 2013] fullrun_ccd7_acisf14231_pi14-548_cl_pass1_tfrozen_src10.ximg exists [Sat May 11 17:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14231_pi14-548_cl_pass1_tfrozen_src10.csv [Sat May 11 17:27:22 2013] fullrun_ccd7_acisf14231_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists [Sat May 11 17:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14231_pi14-548_cl_pass1_tfrozen_src10.csv [Sat May 11 17:27:22 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf14231_pi14-548_cl_pass1_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf14231_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 11 17:27:33 2013] Spatial fit model total counts = 93.873000, observed total counts = 100.000000 [Sat May 11 17:27:33 2013] Offset between fit and detection position for source 11 = 0.050218 pixels [Sat May 11 17:27:33 2013] 93.798140 total counts/ 6.286040 bgd. counts: snr = 34.904348 Spatial fit parameters: Offset between fit and detection position for source 11 = 0.050218 pixels Position = (300.5, 556.9) = 23 58 9.65 -32 36 16.9 Extent = 1.1 (0.9-1.3)" x 0.5 (0.4-0.6)", rotation angle = 337 (321-348) degrees Source counts = 87.5 +/- 9.7 Background counts = 6.3 Rate = 0.001 +/- 0.0002 [Sat May 11 17:27:33 2013] Vigneting correction estimate = 1.000000 [Sat May 11 17:27:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 11 17:27:33 2013] Assessing source extent using major axis lower bound [Sat May 11 17:27:33 2013] Source does appear to be extended [Sat May 11 17:27:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.41 [Sat May 11 17:44:20 2013] Writing source region out to fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11_src.reg [Sat May 11 17:44:20 2013] Extracting stamp from image fullrun_ccd7_acisf14231_pi14-548_cl_sm2.00.img.gz, (251, 508) - (350, 606) [Sat May 11 17:44:20 2013] Writing fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11.gif [Sat May 11 17:47:00 2013] Size of ../../acisf14231/products/events/fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11_src.evt.gz[events] = 93 counts [Sat May 11 17:47:00 2013] Mean chipx,y = (494.08, 865.25) [Sat May 11 17:47:00 2013] Mean tdetx,y = (4411.08, 2567.25) [Sat May 11 17:47:00 2013] chipx,y range = (475.00-511.00, 845.00-888.00) [Sat May 11 17:47:00 2013] Size of ../../acisf14231/products/events/fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 64 counts [Sat May 11 17:47:01 2013] Not generating rmf since there are only 87 counts [Sat May 11 17:47:01 2013] arf not found, will run specextract [Sat May 11 17:47:09 2013] ../../acisf14231/products/spectra/fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11.warf not found [Sat May 11 17:47:09 2013] ../../acisf14231/products/spectra/fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11.wrmf not found [Sat May 11 17:47:09 2013] Removal of ../../acisf14231/products/spectra/fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11.soff failed [Sat May 11 17:57:12 2013] Spectrum 11 has only 88 counts, deleting rmf [Sat May 11 17:57:12 2013] 200.59 [Sat May 11 17:57:21 2013] Updating aperture counts using extracted products [Sat May 11 17:57:21 2013] Total counts from fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11_src.pi.gz = 93.00 [Sat May 11 17:57:21 2013] Total counts from fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11_bgd.pi.gz = 64.00 [Sat May 11 17:57:21 2013] Got source and background scale factors 0.000002, 0.000042 [Sat May 11 17:57:21 2013] User source parameters: Position = (300.5, 556.9) = 23 58 9.65 -32 36 16.9 Extent = 1.1 (0.9-1.3)" x 0.5 (0.4-0.6)", rotation angle = 337 (321-348) degrees Source aperture counts = 90.3 +/- 10.7 Background aperture counts = 2.7 Rate = 0.002 +/- 0.0002 [Sat May 11 17:57:26 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 11 17:57:26 2013] Using photon index=1.80, rate=0.00149, arf fullrun_ccd7_acisf14231_pi14-548_pass1_cl_src11.arf [Sat May 11 17:57:26 2013] Assuming count rate is from the 0.20-8.00 bandpass [Sat May 11 17:57:26 2013] Updating source flux to 1.3e-14 [Sat May 11 17:57:46 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting