[Thu May  9 18:48:14 2013] Detection parameters:
  Position = (501.1, 963.3) = 3 53 46.94 -10 25 19.9
  Extent = 0.5" x 0.5", rotation angle = 137 degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.4
  Rate = 0.001 +/- 0.0004

[Thu May  9 18:48:14 2013] Off-axis axis estimate = 0.20'
[Thu May  9 18:53:39 2013] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu May  9 18:53:39 2013] Initial guess for spatial extent in simple fitting = 0.41"
[Thu May  9 18:53:39 2013] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.840
[Thu May  9 18:53:39 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.41"
[Thu May  9 19:00:49 2013] fullrun_ccd7_acisf14218_pi14-548_cl_pass0_src5.ximg exists
[Thu May  9 19:00:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14218_pi14-548_cl_pass0_src5.csv
[Thu May  9 19:00:49 2013] fullrun_ccd7_acisf14218_pi14-548_cl_pass0_src5_1.ximg exists
[Thu May  9 19:00:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14218_pi14-548_cl_pass0_src5.csv
[Thu May  9 19:00:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14218_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14218_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:00:49 2013] fullrun_ccd7_acisf14218_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu May  9 19:00:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14218_pi14-548_cl_pass0_tfrozen_src5.csv
[Thu May  9 19:00:49 2013] fullrun_ccd7_acisf14218_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May  9 19:00:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14218_pi14-548_cl_pass0_tfrozen_src5.csv
[Thu May  9 19:00:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14218_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14218_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:00:52 2013] Spatial fit model total counts = 12.143600, observed total counts = 16.000000
[Thu May  9 19:00:52 2013] Offset between fit and detection position for source 5 = 0.769047 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.769047 pixels
  Position = (501.4, 964.0) = 3 53 46.95 -10 25 19.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 13.2 +/- 3.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Thu May  9 19:00:52 2013] Vigneting correction estimate = 1.000000
[Thu May  9 19:00:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 19:00:52 2013] Assessing source extent using major axis lower bound
[Thu May  9 19:00:52 2013] Source does appear to be extended
[Thu May  9 19:00:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 19:05:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 19:05:40 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Thu May  9 19:05:40 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.931
[Thu May  9 19:05:40 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.38"
[Thu May  9 19:12:30 2013] fullrun_ccd7_acisf14218_pi14-548_cl_pass1_src5.ximg exists
[Thu May  9 19:12:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14218_pi14-548_cl_pass1_src5.csv
[Thu May  9 19:12:30 2013] fullrun_ccd7_acisf14218_pi14-548_cl_pass1_src5_1.ximg exists
[Thu May  9 19:12:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14218_pi14-548_cl_pass1_src5.csv
[Thu May  9 19:12:30 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14218_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14218_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:12:30 2013] fullrun_ccd7_acisf14218_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu May  9 19:12:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14218_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu May  9 19:12:30 2013] fullrun_ccd7_acisf14218_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May  9 19:12:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14218_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu May  9 19:12:30 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14218_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14218_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:12:33 2013] Spatial fit model total counts = 12.168900, observed total counts = 16.000000
[Thu May  9 19:12:33 2013] Offset between fit and detection position for source 5 = 0.014237 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.014237 pixels
  Position = (501.4, 964.0) = 3 53 46.95 -10 25 19.8
  Extent = 0.4 (0.3-0.7)" x 0.3 (0.2-0.5)", rotation angle = 143 (75-0) degrees
  Source counts = 13.2 +/- 3.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Thu May  9 19:12:33 2013] Vigneting correction estimate = 1.000000
[Thu May  9 19:12:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 19:12:33 2013] Assessing source extent using major axis lower bound
[Thu May  9 19:12:33 2013] Source does appear to be extended
[Thu May  9 19:12:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.66
[Thu May  9 19:15:37 2013] Writing source region out to fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5_src.reg
[Thu May  9 19:15:37 2013] Extracting stamp from image fullrun_ccd7_acisf14218_pi14-548_cl_sm2.00.img.gz, (483, 945) - (520, 983)
[Thu May  9 19:15:37 2013] Writing fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5.gif
[Thu May  9 19:16:49 2013] Size of ../../acisf14218/products/events/fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5_src.evt.gz[events] = 13 counts
[Thu May  9 19:16:49 2013] Mean chipx,y = (175.85, 513.69)
[Thu May  9 19:16:49 2013] Mean tdetx,y = (4092.85, 2215.69)
[Thu May  9 19:16:49 2013] chipx,y range = (168.00-196.00, 499.00-528.00)
[Thu May  9 19:16:49 2013] Size of ../../acisf14218/products/events/fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 2 counts
[Thu May  9 19:16:50 2013] Not generating rmf since there are only 13 counts
[Thu May  9 19:16:50 2013] arf not found, will run specextract
[Thu May  9 19:16:57 2013] ../../acisf14218/products/spectra/fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5.warf not found
[Thu May  9 19:16:57 2013] ../../acisf14218/products/spectra/fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5.wrmf not found
[Thu May  9 19:16:57 2013] Removal of ../../acisf14218/products/spectra/fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5.soff failed
[Thu May  9 19:18:45 2013] Spectrum 5 has only 13 counts, deleting rmf
[Thu May  9 19:18:45 2013] 233.546
[Thu May  9 19:18:47 2013] Updating aperture counts using extracted products
[Thu May  9 19:18:47 2013] Total counts from fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5_src.pi.gz = 13.00
[Thu May  9 19:18:47 2013] Total counts from fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5_bgd.pi.gz = 2.00
[Thu May  9 19:18:47 2013] Got source and background scale factors 0.000000, 0.000006
[Thu May  9 19:18:47 2013] User source parameters:
  Position = (501.4, 964.0) = 3 53 46.95 -10 25 19.8
  Extent = 0.4 (0.3-0.7)" x 0.3 (0.2-0.5)", rotation angle = 143 (75-0) degrees
  Source aperture counts = 12.9 +/- 4.7
  Background aperture counts = 0.1
  Rate = 0.001 +/- 0.0005

[Thu May  9 19:18:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 19:18:48 2013] Using photon index=1.80, rate=0.00134, arf fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5.arf
[Thu May  9 19:18:48 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  9 19:18:48 2013] Updating source flux to 1e-14
[Thu May  9 19:18:54 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 19:18:55 2013] acisf14218/analysis//spectral/fullrun_ccd7_acisf14218_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete