[Fri May  3 15:28:10 2013] Detection parameters:
  Position = (963.4, 967.5) = 0 42 43.94 41 16 36.8
  Extent = 0.5" x 0.5", rotation angle = 23 degrees
  Source counts = 10.9 +/- 4.5
  Background counts = 9.1
  Rate = 0.0003 +/- 0.0001

[Fri May  3 15:28:10 2013] Off-axis axis estimate = 0.54'
[Fri May  3 17:54:37 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri May  3 17:54:37 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Fri May  3 17:54:37 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.345
[Fri May  3 17:54:37 2013] Giving source the simple spatial ID 84 for pass 0, mean size = 0.39"
[Fri May  3 19:41:36 2013] fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src84.ximg exists
[Fri May  3 19:41:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src84.csv
[Fri May  3 19:41:36 2013] fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src84_1.ximg exists
[Fri May  3 19:41:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src84.csv
[Fri May  3 19:41:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 19:41:37 2013] fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src84.ximg exists
[Fri May  3 19:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src84.csv
[Fri May  3 19:41:37 2013] fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src84_1.ximg exists
[Fri May  3 19:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src84.csv
[Fri May  3 19:41:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src84_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 19:41:57 2013] Source 67 is offset by 3.555065 and -3.655163 pixels which is larger than
2 X fitted extent = 0.445939 x 0.445939, not incorporating fit results
[Fri May  3 19:41:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 19:41:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 19:41:57 2013] Assessing source extent using major
[Fri May  3 19:41:57 2013] Source does appear to be extended
[Fri May  3 19:41:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 19:41:57 2013] Deleting source due to low Poisson probability 0.9