[Fri May  3 15:28:09 2013] Detection parameters:
  Position = (1225.1, 863.6) = 0 42 32.52 41 15 45.7
  Extent = 0.5" x 0.5", rotation angle = 130 degrees
  Source counts = 10.2 +/- 3.7
  Background counts = 3.8
  Rate = 0.0003 +/- 0.0001

[Fri May  3 15:28:10 2013] Off-axis axis estimate = 2.08'
[Fri May  3 17:54:37 2013] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri May  3 17:54:37 2013] Initial guess for spatial extent in simple fitting = 0.44"
[Fri May  3 17:54:37 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.775
[Fri May  3 17:54:37 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 0.44"
[Fri May  3 19:41:36 2013] fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src85.ximg exists
[Fri May  3 19:41:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src85.csv
[Fri May  3 19:41:36 2013] fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src85_1.ximg exists
[Fri May  3 19:41:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src85.csv
[Fri May  3 19:41:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14197_pi14-548_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 19:41:37 2013] fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src85.ximg exists
[Fri May  3 19:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src85.csv
[Fri May  3 19:41:37 2013] fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src85_1.ximg exists
[Fri May  3 19:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src85.csv
[Fri May  3 19:41:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14197_pi14-548_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 19:41:57 2013] Spatial fit model total counts = 23.495300, observed total counts = 26.000000
[Fri May  3 19:41:57 2013] Offset between fit and detection position for source 51 = 0.723734 pixels
[Fri May  3 19:41:57 2013] 21.519260 total counts/ 8.244960 bgd. counts: snr = 4.622930
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.723734 pixels
  Position = (1225.6, 864.1) = 0 42 32.52 41 15 45.7
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 13.3 +/- 4.6
  Background counts = 8.2
  Rate = 0.0004 +/- 0.0001
[Fri May  3 19:41:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 19:41:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 19:41:57 2013] Assessing source extent using major axis lower bound
[Fri May  3 19:41:57 2013] Source does appear to be extended
[Fri May  3 19:41:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 19:41:57 2013] Deleting source due to low Poisson probability 0.9