[Fri May  3 15:27:31 2013] Detection parameters:
  Position = (772.5, 510.5) = 0 42 15.25 41 18 0.3
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 36.1 +/- 6.2
  Background counts = 2.9
  Rate = 0.001 +/- 0.0002

[Fri May  3 15:27:31 2013] Off-axis axis estimate = 5.64'
[Fri May  3 17:21:11 2013] Using EEF radius (= 1.46 ")to estimate initial spatial extent for simple fitting
[Fri May  3 17:21:11 2013] Initial guess for spatial extent in simple fitting = 1.46"
[Fri May  3 17:21:11 2013] source mask rpix=3.0, npix_max = 47, mask sum = 40, frac = 0.834
[Fri May  3 17:21:11 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 1.46"
[Fri May  3 17:54:36 2013] fullrun_ccd6_acisf14197_pi14-548_cl_pass0_src20.ximg exists
[Fri May  3 17:54:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14197_pi14-548_cl_pass0_src20.csv
[Fri May  3 17:54:36 2013] fullrun_ccd6_acisf14197_pi14-548_cl_pass0_src20_1.ximg exists
[Fri May  3 17:54:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14197_pi14-548_cl_pass0_src20.csv
[Fri May  3 17:54:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14197_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14197_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 17:54:36 2013] fullrun_ccd6_acisf14197_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Fri May  3 17:54:36 2013] fullrun_ccd6_acisf14197_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Fri May  3 17:54:37 2013] Fit fullrun_ccd6_acisf14197_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Fri May  3 19:41:46 2013] Spatial fit model total counts = 63.668000, observed total counts = 70.000000
[Fri May  3 19:41:46 2013] Offset between fit and detection position for source 16 = 1.021695 pixels
[Fri May  3 19:41:46 2013] 65.969800 total counts/ 31.120900 bgd. counts: snr = 6.246878
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.021695 pixels
  Position = (772.2, 511.5) = 0 42 15.28 41 18 0.5
  Extent = 1.0 (0.6-2.0)", rotation angle = 0
  Source counts = 34.8 +/- 8.1
  Background counts = 31.1
  Rate = 0.0009 +/- 0.0002
[Fri May  3 19:41:46 2013] Vigneting correction estimate = 1.000000
[Fri May  3 19:41:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 19:41:46 2013] Assessing source extent using major axis lower bound
[Fri May  3 19:41:46 2013] Source does appear to be extended
[Fri May  3 19:41:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 20:57:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 20:57:16 2013] Initial guess for spatial extent in simple fitting = 1.02"
[Fri May  3 20:57:16 2013] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.716
[Fri May  3 20:57:16 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 1.02"
[Fri May  3 21:30:26 2013] fullrun_ccd6_acisf14197_pi14-548_cl_pass1_src20.ximg exists
[Fri May  3 21:30:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14197_pi14-548_cl_pass1_src20.csv
[Fri May  3 21:30:26 2013] fullrun_ccd6_acisf14197_pi14-548_cl_pass1_src20_1.ximg exists
[Fri May  3 21:30:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14197_pi14-548_cl_pass1_src20.csv
[Fri May  3 21:30:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14197_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14197_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:30:26 2013] fullrun_ccd6_acisf14197_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Fri May  3 21:30:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14197_pi14-548_cl_pass1_tfrozen_src20.csv
[Fri May  3 21:30:26 2013] fullrun_ccd6_acisf14197_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Fri May  3 21:30:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf14197_pi14-548_cl_pass1_tfrozen_src20.csv
[Fri May  3 21:30:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf14197_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf14197_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 23:18:05 2013] Spatial fit model total counts = 46.122900, observed total counts = 63.000000
[Fri May  3 23:18:05 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 23:18:05 2013] Vigneting correction estimate = 1.000000
[Fri May  3 23:18:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 23:18:05 2013] Assessing source extent using major axis lower bound
[Fri May  3 23:18:05 2013] Source does appear to be extended
[Fri May  3 23:18:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 23:26:27 2013] Writing source region out to fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16_src.reg
[Fri May  3 23:26:27 2013] Extracting stamp from image fullrun_ccd6_acisf14197_pi14-548_cl_sm2.00.img.gz, (725, 465) - (819, 558)
[Fri May  3 23:26:27 2013] Writing fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16.gif
[Fri May  3 23:38:14 2013] Size of ../../acisf14197/products/events/fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16_src.evt.gz[events] = 63 counts
[Fri May  3 23:38:14 2013] Mean chipx,y = (577.59, 312.32)
[Fri May  3 23:38:14 2013] Mean tdetx,y = (3452.59, 2014.32)
[Fri May  3 23:38:14 2013] chipx,y range = (556.00-599.00, 288.00-330.00)
[Fri May  3 23:38:14 2013] Size of ../../acisf14197/products/events/fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 34 counts
[Fri May  3 23:38:15 2013] Not generating rmf since there are only 34 counts
[Fri May  3 23:38:15 2013] arf not found, will run specextract
[Fri May  3 23:38:45 2013] ../../acisf14197/products/spectra/fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16.warf not found
[Fri May  3 23:38:45 2013] ../../acisf14197/products/spectra/fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16.wrmf not found
[Fri May  3 23:38:45 2013] Removal of ../../acisf14197/products/spectra/fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16.soff failed
[Fri May  3 23:44:53 2013] Spectrum 16 has only 35 counts, deleting rmf
[Fri May  3 23:44:53 2013] 173.864
[Sat May  4 00:09:43 2013] Updating aperture counts using extracted products
[Sat May  4 00:09:43 2013] Total counts from fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16_src.pi.gz = 63.00
[Sat May  4 00:09:43 2013] Total counts from fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16_bgd.pi.gz = 34.00
[Sat May  4 00:09:43 2013] Got source and background scale factors 0.000003, 0.000038
[Sat May  4 00:09:43 2013] User source parameters:
  Position = (772.2, 511.5) = 0 42 15.28 41 18 0.5
  Extent = 1.0 (0.6-2.0)", rotation angle = 0
  Source aperture counts = 60.1 +/- 9.0
  Background aperture counts = 2.9
  Rate = 0.002 +/- 0.0002

[Sat May  4 00:09:45 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 00:09:45 2013] Using photon index=1.80, rate=0.000932, arf fullrun_ccd6_acisf14197_pi14-548_pass1_cl_src16.arf
[Sat May  4 00:09:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May  4 00:09:45 2013] Updating source flux to 1.1e-14
[Sat May  4 00:10:21 2013] Flag p found in src. 16 procflags, skipping spectral fitting
[Sat May  4 00:10:21 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting