[Fri May  3 15:25:41 2013] Detection parameters:
  Position = (1026.5, 332.7) = 0 42 45.90 41 24 34.7
  Extent = 0.7" x 0.5", rotation angle = 120 degrees
  Source counts = 13.7 +/- 4.6
  Background counts = 7.3
  Rate = 0.0004 +/- 0.0001

[Fri May  3 15:25:41 2013] Off-axis axis estimate = 8.51'
[Fri May  3 15:31:53 2013] Using EEF radius (= 3.20 ")to estimate initial spatial extent for simple fitting
[Fri May  3 15:31:53 2013] Initial guess for spatial extent in simple fitting = 3.20"
[Fri May  3 15:31:53 2013] source mask rpix=6.5, npix_max = 196, mask sum = 191, frac = 0.972
[Fri May  3 15:31:53 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 3.20"
[Fri May  3 16:21:14 2013] fullrun_ccd2_acisf14197_pi14-548_cl_pass0_src5.ximg exists
[Fri May  3 16:21:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14197_pi14-548_cl_pass0_src5.csv
[Fri May  3 16:21:14 2013] fullrun_ccd2_acisf14197_pi14-548_cl_pass0_src5_1.ximg exists
[Fri May  3 16:21:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14197_pi14-548_cl_pass0_src5.csv
[Fri May  3 16:21:14 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14197_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14197_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 16:21:14 2013] fullrun_ccd2_acisf14197_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri May  3 16:21:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14197_pi14-548_cl_pass0_tfrozen_src5.csv
[Fri May  3 16:21:14 2013] fullrun_ccd2_acisf14197_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May  3 16:21:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14197_pi14-548_cl_pass0_tfrozen_src5.csv
[Fri May  3 16:21:14 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14197_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14197_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 19:41:41 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 36.682368 pixels away
[Fri May  3 19:41:41 2013] Vigneting correction estimate = 1.000000
[Fri May  3 19:41:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 19:41:41 2013] Assessing source extent using major
[Fri May  3 19:41:41 2013] Source does appear to be extended
[Fri May  3 19:41:41 2013] Computing asymmetry using major and minor axis, asym = 1.35
[Fri May  3 19:41:41 2013] Deleting source due to low Poisson probability 0.9