[Sun May  5 09:46:00 2013] Detection parameters:
  Position = (870.4, 355.1) = 20 43 7.14 -0 42 29.7
  Extent = 0.6" x 0.5", rotation angle = 5 degrees
  Source counts = 15.9 +/- 4.1
  Background counts = 1.1
  Rate = 0.001 +/- 0.0003

[Sun May  5 09:46:00 2013] Off-axis axis estimate = 3.01'
[Sun May  5 10:37:54 2013] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Sun May  5 10:37:54 2013] Initial guess for spatial extent in simple fitting = 0.58"
[Sun May  5 10:37:54 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.061
[Sun May  5 10:37:54 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.58"
[Sun May  5 10:51:02 2013] fullrun_ccd7_acisf14051_pi14-548_cl_pass0_src9.ximg exists
[Sun May  5 10:51:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14051_pi14-548_cl_pass0_src9.csv
[Sun May  5 10:51:02 2013] fullrun_ccd7_acisf14051_pi14-548_cl_pass0_src9_1.ximg exists
[Sun May  5 10:51:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14051_pi14-548_cl_pass0_src9.csv
[Sun May  5 10:51:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14051_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14051_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:51:03 2013] fullrun_ccd7_acisf14051_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun May  5 10:51:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14051_pi14-548_cl_pass0_tfrozen_src9.csv
[Sun May  5 10:51:03 2013] fullrun_ccd7_acisf14051_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May  5 10:51:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14051_pi14-548_cl_pass0_tfrozen_src9.csv
[Sun May  5 10:51:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14051_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14051_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:51:07 2013] Spatial fit model total counts = 16.821600, observed total counts = 19.000000
[Sun May  5 10:51:07 2013] Offset between fit and detection position for source 10 = 0.736050 pixels
[Sun May  5 10:51:07 2013] 16.772168 total counts/ 0.185668 bgd. counts: snr = 38.493396
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.736050 pixels
  Position = (870.9, 355.6) = 20 43 7.13 -0 42 29.7
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 16.6 +/- 4.1
  Background counts = 0.2
  Rate = 0.001 +/- 0.0003
[Sun May  5 10:51:07 2013] Vigneting correction estimate = 1.000000
[Sun May  5 10:51:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 10:51:07 2013] Assessing source extent using major axis lower bound
[Sun May  5 10:51:07 2013] Source does appear to be extended
[Sun May  5 10:51:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 11:08:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 11:08:29 2013] Initial guess for spatial extent in simple fitting = 0.71"
[Sun May  5 11:08:29 2013] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.061
[Sun May  5 11:08:29 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.71"
[Sun May  5 11:21:36 2013] fullrun_ccd7_acisf14051_pi14-548_cl_pass1_src9.ximg exists
[Sun May  5 11:21:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14051_pi14-548_cl_pass1_src9.csv
[Sun May  5 11:21:36 2013] fullrun_ccd7_acisf14051_pi14-548_cl_pass1_src9_1.ximg exists
[Sun May  5 11:21:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14051_pi14-548_cl_pass1_src9.csv
[Sun May  5 11:21:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14051_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14051_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 11:21:36 2013] fullrun_ccd7_acisf14051_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun May  5 11:21:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14051_pi14-548_cl_pass1_tfrozen_src9.csv
[Sun May  5 11:21:36 2013] fullrun_ccd7_acisf14051_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May  5 11:21:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14051_pi14-548_cl_pass1_tfrozen_src9.csv
[Sun May  5 11:21:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14051_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14051_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 11:21:40 2013] Spatial fit model total counts = 15.597100, observed total counts = 18.000000
[Sun May  5 11:21:40 2013] Offset between fit and detection position for source 10 = 0.039693 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.039693 pixels
  Position = (870.9, 355.6) = 20 43 7.14 -0 42 29.7
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 16.0 +/- 4.0
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Sun May  5 11:21:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 11:21:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 11:21:40 2013] Assessing source extent using major axis lower bound
[Sun May  5 11:21:40 2013] Source does appear to be extended
[Sun May  5 11:21:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 11:24:22 2013] Writing source region out to fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10_src.reg
[Sun May  5 11:24:22 2013] Extracting stamp from image fullrun_ccd7_acisf14051_pi14-548_cl_sm2.00.img.gz, (841, 326) - (901, 386)
[Sun May  5 11:24:22 2013] Writing fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10.gif
[Sun May  5 11:26:43 2013] Size of ../../acisf14051/products/events/fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10_src.evt.gz[events] = 17 counts
[Sun May  5 11:26:43 2013] Mean chipx,y = (336.35, 847.29)
[Sun May  5 11:26:43 2013] Mean tdetx,y = (4253.35, 2549.29)
[Sun May  5 11:26:43 2013] chipx,y range = (322.00-353.00, 834.00-869.00)
[Sun May  5 11:26:43 2013] Size of ../../acisf14051/products/events/fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 21 counts
[Sun May  5 11:26:44 2013] Not generating rmf since there are only 16 counts
[Sun May  5 11:26:44 2013] arf not found, will run specextract
[Sun May  5 11:26:52 2013] ../../acisf14051/products/spectra/fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10.warf not found
[Sun May  5 11:26:52 2013] ../../acisf14051/products/spectra/fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10.wrmf not found
[Sun May  5 11:26:52 2013] Removal of ../../acisf14051/products/spectra/fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10.soff failed
[Sun May  5 11:29:34 2013] Spectrum 10 has only 16 counts, deleting rmf
[Sun May  5 11:29:34 2013] 226.875
[Sun May  5 11:29:37 2013] Updating aperture counts using extracted products
[Sun May  5 11:29:37 2013] Total counts from fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10_src.pi.gz = 17.00
[Sun May  5 11:29:37 2013] Total counts from fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10_bgd.pi.gz = 21.00
[Sun May  5 11:29:37 2013] Got source and background scale factors 0.000001, 0.000016
[Sun May  5 11:29:37 2013] User source parameters:
  Position = (870.9, 355.6) = 20 43 7.14 -0 42 29.7
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 15.2 +/- 5.2
  Background aperture counts = 1.8
  Rate = 0.001 +/- 0.0004

[Sun May  5 11:29:39 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 11:29:39 2013] Using photon index=1.80, rate=0.00108, arf fullrun_ccd7_acisf14051_pi14-548_pass1_cl_src10.arf
[Sun May  5 11:29:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 11:29:39 2013] Updating source flux to 8.5e-15
[Sun May  5 11:29:44 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting