[Sun May  5 09:44:23 2013] Detection parameters:
  Position = (747.3, 1013.6) = 20 42 27.68 -0 44 30.5
  Extent = 3.8" x 3.1", rotation angle = 145 degrees
  Source counts = 48.9 +/- 9.6
  Background counts = 43.1
  Rate = 0.003 +/- 0.0006

[Sun May  5 09:44:23 2013] Off-axis axis estimate = 12.75'
[Sun May  5 09:47:21 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun May  5 09:47:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 09:47:21 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun May  5 09:47:21 2013] source mask rpix=14.8, npix_max = 935, mask sum = 961, frac = 1.027
[Sun May  5 09:47:21 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun May  5 10:10:06 2013] fullrun_ccd2_acisf14051_pi14-548_cl_pass0_src1.ximg exists
[Sun May  5 10:10:06 2013] fullrun_ccd2_acisf14051_pi14-548_cl_pass0_src1_1.ximg exists
[Sun May  5 10:10:06 2013] Fit fullrun_ccd2_acisf14051_pi14-548_cl_pass0_src1 appears to have run properly
[Sun May  5 10:10:06 2013] fullrun_ccd2_acisf14051_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun May  5 10:10:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14051_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun May  5 10:10:06 2013] fullrun_ccd2_acisf14051_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  5 10:10:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14051_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun May  5 10:10:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14051_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14051_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:51:05 2013] Spatial fit model total counts = 153.491000, observed total counts = 144.000000
[Sun May  5 10:51:05 2013] Offset between fit and detection position for source 1 = 2.730558 pixels
[Sun May  5 10:51:05 2013] 153.665900 total counts/ 87.285800 bgd. counts: snr = 7.105033
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.730558 pixels
  Position = (750.1, 1013.7) = 20 42 27.60 -0 44 30.7
  Extent = 8.4 (6.4-11.2)" x 3.6 (2.1-5.0)", rotation angle = 13 (2-26) degrees
  Source counts = 66.4 +/- 12.4
  Background counts = 87.3
  Rate = 0.004 +/- 0.0008
[Sun May  5 10:51:05 2013] Vigneting correction estimate = 1.000000
[Sun May  5 10:51:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 10:51:05 2013] Assessing source extent using major axis lower bound
[Sun May  5 10:51:05 2013] Source does appear to be extended
[Sun May  5 10:51:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.28
[Sun May  5 10:51:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 10:51:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 10:51:17 2013] Initial guess for spatial extent in simple fitting = 6.01"
[Sun May  5 10:51:17 2013] source mask rpix=12.2, npix_max = 646, mask sum = 650, frac = 1.006
[Sun May  5 10:51:17 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.01"
[Sun May  5 11:05:54 2013] fullrun_ccd2_acisf14051_pi14-548_cl_pass1_src1.ximg exists
[Sun May  5 11:05:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14051_pi14-548_cl_pass1_src1.csv
[Sun May  5 11:05:54 2013] fullrun_ccd2_acisf14051_pi14-548_cl_pass1_src1_1.ximg exists
[Sun May  5 11:05:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14051_pi14-548_cl_pass1_src1.csv
[Sun May  5 11:05:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14051_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14051_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 11:05:54 2013] fullrun_ccd2_acisf14051_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun May  5 11:05:54 2013] fullrun_ccd2_acisf14051_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May  5 11:05:54 2013] Fit fullrun_ccd2_acisf14051_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May  5 11:21:38 2013] Warning, spatial fit 1 centroid is now closest to src. 2
[Sun May  5 11:21:38 2013] Source 1 in spatial fitting is no longer close to this source
[Sun May  5 11:21:38 2013] Vigneting correction estimate = 1.000000
[Sun May  5 11:21:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 11:21:38 2013] Assessing source extent using major axis lower bound
[Sun May  5 11:21:38 2013] Source does appear to be extended
[Sun May  5 11:21:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.28
[Sun May  5 11:21:49 2013] Writing source region out to fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1_src.reg
[Sun May  5 11:21:49 2013] Extracting stamp from image fullrun_ccd2_acisf14051_pi14-548_cl_sm2.00.img.gz, (366, 629) - (1081, 1081)
[Sun May  5 11:21:49 2013] Writing fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1.gif
[Sun May  5 11:21:51 2013] Size of ../../acisf14051/products/events/fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1_src.evt.gz[events] = 110 counts
[Sun May  5 11:21:51 2013] Mean chipx,y = (315.75, 996.23)
[Sun May  5 11:21:51 2013] Mean tdetx,y = (4057.23, 3770.25)
[Sun May  5 11:21:51 2013] chipx,y range = (267.00-376.00, 950.00-1022.00)
[Sun May  5 11:21:51 2013] Size of ../../acisf14051/products/events/fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 492 counts
[Sun May  5 11:21:52 2013] Not generating rmf since there are only 66 counts
[Sun May  5 11:21:52 2013] arf not found, will run specextract
[Sun May  5 11:22:24 2013] ../../acisf14051/products/spectra/fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1.warf not found
[Sun May  5 11:22:24 2013] ../../acisf14051/products/spectra/fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1.wrmf not found
[Sun May  5 11:22:24 2013] Removal of ../../acisf14051/products/spectra/fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1.soff failed
[Sun May  5 11:22:31 2013] Spectrum 1 has only 66 counts, deleting rmf
[Sun May  5 11:22:31 2013] 69.3503
[Sun May  5 11:29:36 2013] Updating aperture counts using extracted products
[Sun May  5 11:29:36 2013] Total counts from fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1_src.pi.gz = 110.00
[Sun May  5 11:29:36 2013] Total counts from fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1_bgd.pi.gz = 492.00
[Sun May  5 11:29:36 2013] Got source and background scale factors 0.000094, 0.002583
[Sun May  5 11:29:36 2013] User source parameters:
  Position = (750.1, 1013.7) = 20 42 27.60 -0 44 30.7
  Extent = 8.4 (6.4-11.2)" x 3.6 (2.1-5.0)", rotation angle = 13 (2-26) degrees
  Source aperture counts = 92.1 +/- 11.5
  Background aperture counts = 17.9
  Rate = 0.006 +/- 0.0008

[Sun May  5 11:29:36 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 11:29:36 2013] Using photon index=1.80, rate=0.00447, arf fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1.arf
[Sun May  5 11:29:36 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 11:29:36 2013] Updating source flux to 1.3e-13
[Sun May  5 11:29:40 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 11:29:41 2013] acisf14051/analysis//spectral/fullrun_ccd2_acisf14051_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete