[Thu May 30 21:56:55 2013] Detection parameters:
  Position = (358.0, 499.0) = 13 54 47.62 -37 43 0.6
  Extent = 0.7" x 0.5", rotation angle = 65 degrees
  Source counts = 14.8 +/- 3.9
  Background counts = 0.2
  Rate = 0.003 +/- 0.0008

[Thu May 30 21:56:56 2013] Off-axis axis estimate = 5.80'
[Thu May 30 21:59:02 2013] Using EEF radius (= 1.53 ")to estimate initial spatial extent for simple fitting
[Thu May 30 21:59:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 21:59:02 2013] Initial guess for spatial extent in simple fitting = 1.53"
[Thu May 30 21:59:02 2013] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.222
[Thu May 30 21:59:02 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.53"
[Thu May 30 22:02:01 2013] fullrun_ccd3_acisf14045_pi14-548_cl_pass0_src1.ximg exists
[Thu May 30 22:02:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14045_pi14-548_cl_pass0_src1.csv
[Thu May 30 22:02:01 2013] fullrun_ccd3_acisf14045_pi14-548_cl_pass0_src1_1.ximg exists
[Thu May 30 22:02:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14045_pi14-548_cl_pass0_src1.csv
[Thu May 30 22:02:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14045_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14045_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 22:02:01 2013] fullrun_ccd3_acisf14045_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu May 30 22:02:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14045_pi14-548_cl_pass0_tfrozen_src1.csv
[Thu May 30 22:02:01 2013] fullrun_ccd3_acisf14045_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 30 22:02:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14045_pi14-548_cl_pass0_tfrozen_src1.csv
[Thu May 30 22:02:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14045_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14045_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 22:02:03 2013] Spatial fit model total counts = 15.827800, observed total counts = 18.000000
[Thu May 30 22:02:03 2013] Offset between fit and detection position for source 1 = 1.079787 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.079787 pixels
  Position = (358.7, 499.8) = 13 54 47.61 -37 43 0.4
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 15.7 +/- 4.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Thu May 30 22:02:03 2013] Vigneting correction estimate = 1.000000
[Thu May 30 22:02:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 22:02:03 2013] Assessing source extent using major axis lower bound
[Thu May 30 22:02:03 2013] Source does appear to be extended
[Thu May 30 22:02:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 22:03:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 22:03:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 22:03:32 2013] Initial guess for spatial extent in simple fitting = 0.95"
[Thu May 30 22:03:32 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.061
[Thu May 30 22:03:32 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.95"
[Thu May 30 22:05:54 2013] fullrun_ccd3_acisf14045_pi14-548_cl_pass1_src1.ximg exists
[Thu May 30 22:05:54 2013] fullrun_ccd3_acisf14045_pi14-548_cl_pass1_src1_1.ximg exists
[Thu May 30 22:05:54 2013] Fit fullrun_ccd3_acisf14045_pi14-548_cl_pass1_src1 appears to have run properly
[Thu May 30 22:05:54 2013] fullrun_ccd3_acisf14045_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu May 30 22:05:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14045_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu May 30 22:05:54 2013] fullrun_ccd3_acisf14045_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 30 22:05:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14045_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu May 30 22:05:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14045_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14045_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 22:05:56 2013] Spatial fit model total counts = 14.552700, observed total counts = 16.000000
[Thu May 30 22:05:56 2013] Offset between fit and detection position for source 1 = 0.371140 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.371140 pixels
  Position = (358.5, 499.5) = 13 54 47.62 -37 43 0.6
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Thu May 30 22:05:56 2013] Vigneting correction estimate = 1.000000
[Thu May 30 22:05:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 22:05:56 2013] Assessing source extent using major axis lower bound
[Thu May 30 22:05:56 2013] Source does appear to be extended
[Thu May 30 22:05:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 22:08:14 2013] Writing source region out to fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1_src.reg
[Thu May 30 22:08:14 2013] Extracting stamp from image fullrun_ccd3_acisf14045_pi14-548_cl_sm2.00.img.gz, (318, 459) - (399, 540)
[Thu May 30 22:08:14 2013] Writing fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1.gif
[Thu May 30 22:08:15 2013] Size of ../../acisf14045/products/events/fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1_src.evt.gz[events] = 16 counts
[Thu May 30 22:08:15 2013] Mean chipx,y = (317.75, 705.62)
[Thu May 30 22:08:15 2013] Mean tdetx,y = (4426.38, 3378.75)
[Thu May 30 22:08:15 2013] chipx,y range = (304.00-335.00, 684.00-718.00)
[Thu May 30 22:08:15 2013] Size of ../../acisf14045/products/events/fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3 counts
[Thu May 30 22:08:16 2013] Not generating rmf since there are only 14 counts
[Thu May 30 22:08:16 2013] arf not found, will run specextract
[Thu May 30 22:08:43 2013] ../../acisf14045/products/spectra/fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1.warf not found
[Thu May 30 22:08:43 2013] ../../acisf14045/products/spectra/fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1.wrmf not found
[Thu May 30 22:08:43 2013] Removal of ../../acisf14045/products/spectra/fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1.soff failed
[Thu May 30 22:09:54 2013] Spectrum 1 has only 15 counts, deleting rmf
[Thu May 30 22:09:54 2013] 177.441
[Thu May 30 22:09:56 2013] Updating aperture counts using extracted products
[Thu May 30 22:09:56 2013] Total counts from fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1_src.pi.gz = 16.00
[Thu May 30 22:09:56 2013] Total counts from fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1_bgd.pi.gz = 3.00
[Thu May 30 22:09:56 2013] Got source and background scale factors 0.000002, 0.000028
[Thu May 30 22:09:56 2013] User source parameters:
  Position = (358.5, 499.5) = 13 54 47.62 -37 43 0.6
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source aperture counts = 15.7 +/- 5.1
  Background aperture counts = 0.3
  Rate = 0.003 +/- 0.001

[Thu May 30 22:09:56 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 22:09:56 2013] Using photon index=1.80, rate=0.00317, arf fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1.arf
[Thu May 30 22:09:56 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 30 22:09:56 2013] Updating source flux to 4.1e-14
[Thu May 30 22:10:03 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 22:10:04 2013] acisf14045/analysis//spectral/fullrun_ccd3_acisf14045_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete