[Tue May 21 12:18:00 2013] Detection parameters:
  Position = (1059.2, 653.3) = 13 39 14.72 55 43 9.6
  Extent = 2.1" x 1.1", rotation angle = 87 degrees
  Source counts = 11.9 +/- 3.6
  Background counts = 1.1
  Rate = 0.002 +/- 0.0007

[Tue May 21 12:18:00 2013] Off-axis axis estimate = 6.83'
[Tue May 21 12:25:02 2013] Using EEF radius (= 2.08 ")to estimate initial spatial extent for simple fitting
[Tue May 21 12:25:02 2013] Initial guess for spatial extent in simple fitting = 2.08"
[Tue May 21 12:25:02 2013] source mask rpix=4.2, npix_max = 89, mask sum = 81, frac = 0.905
[Tue May 21 12:25:02 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 2.08"
[Tue May 21 12:33:02 2013] fullrun_ccd3_acisf14043_pi14-548_cl_pass0_src2.ximg exists
[Tue May 21 12:33:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14043_pi14-548_cl_pass0_src2.csv
[Tue May 21 12:33:02 2013] fullrun_ccd3_acisf14043_pi14-548_cl_pass0_src2_1.ximg exists
[Tue May 21 12:33:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14043_pi14-548_cl_pass0_src2.csv
[Tue May 21 12:33:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14043_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14043_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 12:33:02 2013] fullrun_ccd3_acisf14043_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue May 21 12:33:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14043_pi14-548_cl_pass0_tfrozen_src2.csv
[Tue May 21 12:33:02 2013] fullrun_ccd3_acisf14043_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 21 12:33:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14043_pi14-548_cl_pass0_tfrozen_src2.csv
[Tue May 21 12:33:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14043_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14043_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 12:33:05 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 24.581951 pixels away
[Tue May 21 12:33:05 2013] Vigneting correction estimate = 1.000000
[Tue May 21 12:33:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 12:33:05 2013] Assessing source extent using major
[Tue May 21 12:33:05 2013] Source does appear to be extended
[Tue May 21 12:33:05 2013] Computing asymmetry using major and minor axis, asym = 1.86
[Tue May 21 12:33:05 2013] Source is asymmetric
[Tue May 21 12:38:50 2013] Using EEF radius (= 2.08 ")to estimate initial spatial extent for simple fitting
[Tue May 21 12:38:50 2013] Initial guess for spatial extent in simple fitting = 2.08"
[Tue May 21 12:38:50 2013] source mask rpix=4.2, npix_max = 89, mask sum = 81, frac = 0.905
[Tue May 21 12:38:50 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 2.08"
[Tue May 21 12:42:24 2013] fullrun_ccd3_acisf14043_pi14-548_cl_pass1_src2.ximg exists
[Tue May 21 12:42:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14043_pi14-548_cl_pass1_src2.csv
[Tue May 21 12:42:24 2013] fullrun_ccd3_acisf14043_pi14-548_cl_pass1_src2_1.ximg exists
[Tue May 21 12:42:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14043_pi14-548_cl_pass1_src2.csv
[Tue May 21 12:42:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14043_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14043_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 12:42:24 2013] fullrun_ccd3_acisf14043_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue May 21 12:42:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14043_pi14-548_cl_pass1_tfrozen_src2.csv
[Tue May 21 12:42:24 2013] fullrun_ccd3_acisf14043_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 21 12:42:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14043_pi14-548_cl_pass1_tfrozen_src2.csv
[Tue May 21 12:42:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14043_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14043_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 12:42:26 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 22.837219 pixels away
[Tue May 21 12:42:26 2013] Vigneting correction estimate = 1.000000
[Tue May 21 12:42:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 12:42:26 2013] Assessing source extent using major
[Tue May 21 12:42:26 2013] Source does appear to be extended
[Tue May 21 12:42:26 2013] Computing asymmetry using major and minor axis, asym = 1.86
[Tue May 21 12:42:26 2013] Source is asymmetric
[Tue May 21 12:48:46 2013] Writing source region out to fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1_src.reg
[Tue May 21 12:48:46 2013] Extracting stamp from image fullrun_ccd3_acisf14043_pi14-548_cl_sm2.00.img.gz, (964, 558) - (1155, 749)
[Tue May 21 12:48:46 2013] Writing fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1.gif
[Tue May 21 12:49:05 2013] Size of ../../acisf14043/products/events/fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1_src.evt.gz[events] = 18 counts
[Tue May 21 12:49:05 2013] Mean chipx,y = (179.89, 698.61)
[Tue May 21 12:49:05 2013] Mean tdetx,y = (4433.39, 3240.89)
[Tue May 21 12:49:05 2013] chipx,y range = (162.00-196.00, 679.00-719.00)
[Tue May 21 12:49:05 2013] Size of ../../acisf14043/products/events/fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Tue May 21 12:49:06 2013] Not generating rmf since there are only 11 counts
[Tue May 21 12:49:06 2013] arf not found, will run specextract
[Tue May 21 12:49:31 2013] ../../acisf14043/products/spectra/fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1.warf not found
[Tue May 21 12:49:31 2013] ../../acisf14043/products/spectra/fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1.wrmf not found
[Tue May 21 12:49:31 2013] Removal of ../../acisf14043/products/spectra/fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1.soff failed
[Tue May 21 12:50:27 2013] Spectrum 1 has only 12 counts, deleting rmf
[Tue May 21 12:50:27 2013] 167.065
[Tue May 21 12:50:30 2013] Updating aperture counts using extracted products
[Tue May 21 12:50:30 2013] Total counts from fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1_src.pi.gz = 18.00
[Tue May 21 12:50:30 2013] Total counts from fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1_bgd.pi.gz = 14.00
[Tue May 21 12:50:30 2013] Got source and background scale factors 0.000007, 0.000159
[Tue May 21 12:50:30 2013] User source parameters:
  Position = (1059.2, 653.3) = 13 39 14.72 55 43 9.6
  Extent = 2.1" x 1.1", rotation angle = 87
  Source aperture counts = 17.4 +/- 5.3
  Background aperture counts = 0.6
  Rate = 0.003 +/- 0.001

[Tue May 21 12:50:30 2013] Updating counts from extracted products
[Tue May 21 12:50:30 2013] Set source signif. to 17.36/0.80 = 21.75
[Tue May 21 12:50:30 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 12:50:30 2013] Using photon index=1.80, rate=0.00346, arf fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1.arf
[Tue May 21 12:50:30 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May 21 12:50:30 2013] Updating source flux to 5.1e-14
[Tue May 21 12:50:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 12:50:35 2013] acisf14043/analysis//spectral/fullrun_ccd3_acisf14043_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete