[Wed May  8 11:47:52 2013] Detection parameters:
  Position = (911.5, 971.3) = 2 59 18.60 -57 17 30.9
  Extent = 0.5" x 0.5", rotation angle = 5 degrees
  Source counts = 10.9 +/- 3.3
  Background counts = 0.1
  Rate = 0.002 +/- 0.0007

[Wed May  8 11:47:52 2013] Off-axis axis estimate = 2.97'
[Wed May  8 11:54:26 2013] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Wed May  8 11:54:26 2013] Initial guess for spatial extent in simple fitting = 0.57"
[Wed May  8 11:54:26 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.810
[Wed May  8 11:54:26 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.57"
[Wed May  8 11:57:39 2013] fullrun_ccd3_acisf14038_pi14-548_cl_pass0_src2.ximg exists
[Wed May  8 11:57:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14038_pi14-548_cl_pass0_src2.csv
[Wed May  8 11:57:39 2013] fullrun_ccd3_acisf14038_pi14-548_cl_pass0_src2_1.ximg exists
[Wed May  8 11:57:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14038_pi14-548_cl_pass0_src2.csv
[Wed May  8 11:57:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14038_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14038_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 11:57:39 2013] fullrun_ccd3_acisf14038_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed May  8 11:57:39 2013] fullrun_ccd3_acisf14038_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  8 11:57:39 2013] Fit fullrun_ccd3_acisf14038_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May  8 11:57:42 2013] Spatial fit model total counts = 10.152300, observed total counts = 12.000000
[Wed May  8 11:57:42 2013] Offset between fit and detection position for source 5 = 0.679742 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.679742 pixels
  Position = (912.0, 971.8) = 2 59 18.61 -57 17 30.9
  Extent = 0.6 (0.4-0.9)" x 0.3 (0.2-0.4)", rotation angle = 356 (330-20) degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0006
[Wed May  8 11:57:42 2013] Vigneting correction estimate = 1.000000
[Wed May  8 11:57:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 11:57:42 2013] Assessing source extent using major axis lower bound
[Wed May  8 11:57:42 2013] Source does appear to be extended
[Wed May  8 11:57:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Wed May  8 12:03:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 12:03:14 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Wed May  8 12:03:14 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.752
[Wed May  8 12:03:14 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.45"
[Wed May  8 12:06:02 2013] fullrun_ccd3_acisf14038_pi14-548_cl_pass1_src2.ximg exists
[Wed May  8 12:06:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14038_pi14-548_cl_pass1_src2.csv
[Wed May  8 12:06:02 2013] fullrun_ccd3_acisf14038_pi14-548_cl_pass1_src2_1.ximg exists
[Wed May  8 12:06:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14038_pi14-548_cl_pass1_src2.csv
[Wed May  8 12:06:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14038_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14038_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 12:06:02 2013] fullrun_ccd3_acisf14038_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed May  8 12:06:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14038_pi14-548_cl_pass1_tfrozen_src2.csv
[Wed May  8 12:06:02 2013] fullrun_ccd3_acisf14038_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  8 12:06:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14038_pi14-548_cl_pass1_tfrozen_src2.csv
[Wed May  8 12:06:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14038_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14038_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 12:06:04 2013] Spatial fit model total counts = 9.382130, observed total counts = 12.000000
[Wed May  8 12:06:04 2013] Offset between fit and detection position for source 5 = 0.046773 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.046773 pixels
  Position = (912.0, 971.8) = 2 59 18.60 -57 17 30.9
  Extent = 0.6 (0.4-1.1)" x 0.3 (0.2-0.5)", rotation angle = 360 (329-24) degrees
  Source counts = 9.8 +/- 3.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0006
[Wed May  8 12:06:04 2013] Vigneting correction estimate = 1.000000
[Wed May  8 12:06:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 12:06:04 2013] Assessing source extent using major axis lower bound
[Wed May  8 12:06:04 2013] Source does appear to be extended
[Wed May  8 12:06:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Wed May  8 12:12:52 2013] Writing source region out to fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5_src.reg
[Wed May  8 12:12:52 2013] Extracting stamp from image fullrun_ccd3_acisf14038_pi14-548_cl_sm2.00.img.gz, (883, 943) - (941, 1000)
[Wed May  8 12:12:52 2013] Writing fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5.gif
[Wed May  8 12:13:26 2013] Size of ../../acisf14038/products/events/fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5_src.evt.gz[events] = 11 counts
[Wed May  8 12:13:26 2013] Mean chipx,y = (919.45, 657.91)
[Wed May  8 12:13:26 2013] Mean tdetx,y = (4474.09, 3980.45)
[Wed May  8 12:13:26 2013] chipx,y range = (906.00-938.00, 639.00-669.00)
[Wed May  8 12:13:26 2013] Size of ../../acisf14038/products/events/fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 1 counts
[Wed May  8 12:13:27 2013] Not generating rmf since there are only 9 counts
[Wed May  8 12:13:27 2013] arf not found, will run specextract
[Wed May  8 12:13:52 2013] ../../acisf14038/products/spectra/fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5.warf not found
[Wed May  8 12:13:52 2013] ../../acisf14038/products/spectra/fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5.wrmf not found
[Wed May  8 12:13:52 2013] Removal of ../../acisf14038/products/spectra/fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5.soff failed
[Wed May  8 12:15:42 2013] Spectrum 5 has only 10 counts, deleting rmf
[Wed May  8 12:15:42 2013] 197.793
[Wed May  8 12:15:45 2013] Updating aperture counts using extracted products
[Wed May  8 12:15:45 2013] Total counts from fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5_src.pi.gz = 11.00
[Wed May  8 12:15:45 2013] Total counts from fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5_bgd.pi.gz = 1.00
[Wed May  8 12:15:45 2013] Got source and background scale factors 0.000001, 0.000014
[Wed May  8 12:15:45 2013] User source parameters:
  Position = (912.0, 971.8) = 2 59 18.60 -57 17 30.9
  Extent = 0.6 (0.4-1.1)" x 0.3 (0.2-0.5)", rotation angle = 360 (329-24) degrees
  Source aperture counts = 11.0 +/- 4.4
  Background aperture counts = 0.0
  Rate = 0.002 +/- 0.0009

[Wed May  8 12:15:45 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 12:15:45 2013] Using photon index=1.80, rate=0.00194, arf fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5.arf
[Wed May  8 12:15:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 12:15:45 2013] Updating source flux to 2.3e-14
[Wed May  8 12:15:49 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  8 12:15:51 2013] acisf14038/analysis//spectral/fullrun_ccd3_acisf14038_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete