[Fri Aug 14 20:49:17 2015] Detection parameters:
  Position = (78.9, 548.0) = 11 59 21.03 55 40 52.4
  Extent = 0.5" x 0.5", rotation angle = 127 degrees
  Source counts = 14.8 +/- 3.9
  Background counts = 0.2
  Rate = 0.001 +/- 0.0003

[Fri Aug 14 20:49:17 2015] Off-axis axis estimate = 1.88'
[Fri Aug 14 20:53:14 2015] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 20:53:14 2015] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Aug 14 20:53:14 2015] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.548
[Fri Aug 14 20:53:14 2015] Giving source the simple spatial ID 2 for pass 0, mean size = 0.42"
[Fri Aug 14 20:55:29 2015] fullrun_ccd1_acisf14027_pi14-548_cl_pass0_src2.ximg exists
[Fri Aug 14 20:55:29 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14027_pi14-548_cl_pass0_src2.csv
[Fri Aug 14 20:55:29 2015] fullrun_ccd1_acisf14027_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Aug 14 20:55:29 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14027_pi14-548_cl_pass0_src2.csv
[Fri Aug 14 20:55:29 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14027_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14027_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 20:55:29 2015] fullrun_ccd1_acisf14027_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 14 20:55:29 2015] fullrun_ccd1_acisf14027_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 14 20:55:29 2015] Fit fullrun_ccd1_acisf14027_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 14 20:58:20 2015] Spatial fit model total counts = 14.361000, observed total counts = 15.000000
[Fri Aug 14 20:58:20 2015] Offset between fit and detection position for source 10 = 0.713483 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.713483 pixels
  Position = (79.6, 548.3) = 11 59 21.01 55 40 52.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri Aug 14 20:58:20 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 20:58:20 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 20:58:20 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 20:58:20 2015] Source does appear to be extended
[Fri Aug 14 20:58:20 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 14 20:58:32 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 20:58:32 2015] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Aug 14 20:58:32 2015] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.174
[Fri Aug 14 20:58:32 2015] Giving source the simple spatial ID 2 for pass 1, mean size = 0.44"
[Fri Aug 14 21:00:07 2015] fullrun_ccd1_acisf14027_pi14-548_cl_pass1_src2.ximg exists
[Fri Aug 14 21:00:07 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14027_pi14-548_cl_pass1_src2.csv
[Fri Aug 14 21:00:07 2015] fullrun_ccd1_acisf14027_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Aug 14 21:00:07 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14027_pi14-548_cl_pass1_src2.csv
[Fri Aug 14 21:00:07 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14027_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14027_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 21:00:07 2015] fullrun_ccd1_acisf14027_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 14 21:00:07 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14027_pi14-548_cl_pass1_tfrozen_src2.csv
[Fri Aug 14 21:00:07 2015] fullrun_ccd1_acisf14027_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 14 21:00:07 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14027_pi14-548_cl_pass1_tfrozen_src2.csv
[Fri Aug 14 21:00:07 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14027_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14027_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 21:02:16 2015] Spatial fit model total counts = 13.843900, observed total counts = 15.000000
[Fri Aug 14 21:02:16 2015] Offset between fit and detection position for source 10 = 0.005053 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.005053 pixels
  Position = (79.6, 548.3) = 11 59 21.01 55 40 52.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 13.9 +/- 3.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri Aug 14 21:02:16 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 21:02:16 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 21:02:16 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 21:02:16 2015] Source does appear to be extended
[Fri Aug 14 21:02:16 2015] Computing asymmetry using major and minor axis, asym = 1.00