[Sat Aug 15 04:01:52 2015] Detection parameters:
  Position = (1067.6, 987.4) = 12 1 1.61 55 40 17.2
  Extent = 0.5" x 0.5", rotation angle = 64 degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.4
  Rate = 0.0003 +/- 8e-05

[Sat Aug 15 04:01:53 2015] Off-axis axis estimate = 2.53'
[Sat Aug 15 04:23:10 2015] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:23:10 2015] Initial guess for spatial extent in simple fitting = 0.50"
[Sat Aug 15 04:23:10 2015] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.988
[Sat Aug 15 04:23:10 2015] Giving source the simple spatial ID 10 for pass 0, mean size = 0.50"
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src10.ximg exists
[Sat Aug 15 04:30:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src10.csv
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Aug 15 04:30:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src10.csv
[Sat Aug 15 04:30:54 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Aug 15 04:30:54 2015] Fit fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Aug 15 04:37:16 2015] Spatial fit model total counts = 14.397300, observed total counts = 16.000000
[Sat Aug 15 04:37:16 2015] Offset between fit and detection position for source 9 = 0.717474 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.717474 pixels
  Position = (1068.1, 987.9) = 12 1 1.60 55 40 17.2
  Extent = 0.4 (0.3-0.6)" x 0.2 (0.2-0.4)", rotation angle = 63 (33-90) degrees
  Source counts = 13.9 +/- 3.7
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Sat Aug 15 04:37:16 2015] Vigneting correction estimate = 1.000000
[Sat Aug 15 04:37:16 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 15 04:37:16 2015] Assessing source extent using major axis lower bound
[Sat Aug 15 04:37:16 2015] Source does appear to be extended
[Sat Aug 15 04:37:16 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.85
[Sat Aug 15 04:55:00 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:55:00 2015] Initial guess for spatial extent in simple fitting = 0.35"
[Sat Aug 15 04:55:00 2015] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.691
[Sat Aug 15 04:55:00 2015] Giving source the simple spatial ID 10 for pass 1, mean size = 0.35"
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src10.ximg does not exist
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src10_1.ximg does not exist
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Aug 15 05:00:41 2015] Fit fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly