[Sat Aug 15 04:01:53 2015] Detection parameters:
  Position = (587.3, 556.5) = 12 1 29.47 55 36 44.8
  Extent = 0.5" x 0.5", rotation angle = 157 degrees
  Source counts = 352.9 +/- 19.2
  Background counts = 17.1
  Rate = 0.007 +/- 0.0004

[Sat Aug 15 04:01:53 2015] Off-axis axis estimate = 6.99'
[Sat Aug 15 04:23:10 2015] Using EEF radius (= 2.18 ")to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:23:10 2015] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 15 04:23:10 2015] Initial guess for spatial extent in simple fitting = 2.18"
[Sat Aug 15 04:23:10 2015] source mask rpix=4.4, npix_max = 96, mask sum = 79, frac = 0.814
[Sat Aug 15 04:23:10 2015] Giving source the simple spatial ID 1 for pass 0, mean size = 2.18"
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src1.ximg exists
[Sat Aug 15 04:30:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src1.csv
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Aug 15 04:30:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src1.csv
[Sat Aug 15 04:30:54 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 15 04:30:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src1.csv
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 15 04:30:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src1.csv
[Sat Aug 15 04:30:54 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 04:37:16 2015] Spatial fit model total counts = 426.749000, observed total counts = 490.000000
[Sat Aug 15 04:37:16 2015] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 15 04:37:16 2015] Vigneting correction estimate = 1.000000
[Sat Aug 15 04:37:16 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 15 04:37:16 2015] Assessing source extent using major
[Sat Aug 15 04:37:16 2015] Source does appear to be extended
[Sat Aug 15 04:37:16 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 15 04:55:00 2015] Using EEF radius (= 2.18 ")to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:55:00 2015] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 15 04:55:00 2015] Initial guess for spatial extent in simple fitting = 2.18"
[Sat Aug 15 04:55:00 2015] source mask rpix=4.4, npix_max = 96, mask sum = 79, frac = 0.814
[Sat Aug 15 04:55:00 2015] Giving source the simple spatial ID 1 for pass 1, mean size = 2.18"
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src1.ximg exists
[Sat Aug 15 05:00:41 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src1.csv
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Aug 15 05:00:41 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src1.csv
[Sat Aug 15 05:00:41 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 15 05:00:41 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 15 05:00:41 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Aug 15 05:00:41 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes