[Sat Aug 15 04:01:53 2015] Detection parameters:
  Position = (755.9, 1163.3) = 12 1 19.76 55 41 43.5
  Extent = 1.1" x 0.7", rotation angle = 42 degrees
  Source counts = 28.4 +/- 5.5
  Background counts = 1.6
  Rate = 0.0006 +/- 0.0001

[Sat Aug 15 04:01:53 2015] Off-axis axis estimate = 5.42'
[Sat Aug 15 04:23:10 2015] Using EEF radius (= 1.36 ")to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:23:10 2015] Initial guess for spatial extent in simple fitting = 1.36"
[Sat Aug 15 04:23:10 2015] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.990
[Sat Aug 15 04:23:10 2015] Giving source the simple spatial ID 5 for pass 0, mean size = 1.36"
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src5.ximg exists
[Sat Aug 15 04:30:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src5.csv
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Aug 15 04:30:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src5.csv
[Sat Aug 15 04:30:54 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14026_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Aug 15 04:30:54 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Aug 15 04:30:54 2015] Fit fullrun_ccd2_acisf14026_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Aug 15 04:37:16 2015] Spatial fit model total counts = 32.418900, observed total counts = 35.000000
[Sat Aug 15 04:37:16 2015] Offset between fit and detection position for source 16 = 1.456451 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.456451 pixels
  Position = (756.8, 1164.5) = 12 1 19.70 55 41 44.2
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 30.6 +/- 5.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Aug 15 04:37:16 2015] Vigneting correction estimate = 1.000000
[Sat Aug 15 04:37:16 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 15 04:37:16 2015] Assessing source extent using major axis lower bound
[Sat Aug 15 04:37:16 2015] Source does appear to be extended
[Sat Aug 15 04:37:16 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 15 04:55:00 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:55:00 2015] Initial guess for spatial extent in simple fitting = 1.23"
[Sat Aug 15 04:55:00 2015] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.835
[Sat Aug 15 04:55:00 2015] Giving source the simple spatial ID 5 for pass 1, mean size = 1.23"
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src5.ximg does not exist
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_src5_1.ximg does not exist
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Aug 15 05:00:41 2015] fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Aug 15 05:00:41 2015] Fit fullrun_ccd2_acisf14026_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly